Aplicação de óleo fúsel isolado e em mistura com glifosato na pós-emergência tardia de plantas daninhas

Este trabalho foi realizado no Centro de Cana IAC, Ribeirão Preto, com o objetivo de avaliar a eficácia do óleo fúsel isolado e em mistura com glifosato, aplicado na pós-emergência tardia de plantas daninhas de uma comunidade natural. O delineamento experimental foi em blocos casualizados (DBC), com 13 tratamentos em quatro repetições, sendo 52 parcelas de 3 x 3 m cada. A aplicação dos tratamentos foi realizada em 22/3/2006, com equipamento costal pressurizado munido de barra com quatro pontas de pulverização Teejet 110.02 TT, regulado para volume de calda de 212 L ha-1. Avaliaram-se a porcentagem de controle aos 14, 21, 28, 35 e 42 dias após a aplicação do tratamento (DAA) e a massa seca, aos 42 DAA. Para a maioria dos tratamentos somente não houve 100% de controle devido à presença de plantas daninhas dos gêneros Commelina e Cyperus spp., que, mesmo com partes amareladas, foram mais tolerantes à aplicação dos produtos. O controle obtido com óleo fúsel aplicado isoladamente não ultrapassou 20%, aos 42 DAA.

Recycling of glass cullet as aggregate for clays used to produce roof tiles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transference in vitro of the resistance to the antimicrobials between Escherichia coli, Lactobacillus spp. and Salmonella enteritidis isolated from chickens

O objetivo deste trabalho foi verificar a possibilidade de transferência de resistência aos antimicrobianos entre bactérias normais da microbiota de frangos e Salmonella Enteritidis. Utilizamos amostras de Lactobacillus spp. (L. spp.), Salmonella Enteritidis (SE) e Escherichia coli (E. coli) previamente isolados de frangos, selecionados após prova de sensibilidade antimicrobiana in vitro conforme metodologia padrão (Comitê Nacional para Padrões Clínicos de Laboratório). Utilizamos aqueles com resistência e sensibilidade aos antimicrobianos indutores, chamados de bactérias doadoras e receptoras, respectivamente. Os antimicrobianos indutores foram utilizados para estimular a transferência de resistência aos antimicrobianos entre as bactérias. A possibilidade de transferência foi verificada da E. coli resistente para a SE e L. spp. Também foi verificada a transferência de uma amostra de L. spp resistente aos antimicrobianos indutores para a SE. Só foi possível verificar a transferência da resistência aos antimicrobianos indutores quando a bactéria doadora foi a E. coli e a bactéria receptora foi a SE. No presente estudo concluímos que a transferência de resistência aos antimicrobianos entre bactérias é possível, mas nem todas as bactérias participam desse evento, não transmitindo e nem adquirindo esta resistência.

Caracterização imunofenotípica e avaliação quantitativa do infiltrado linfocítário junto às áreas de displasia epitelial da próstata de cães adultos sexualmente intactos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Strategies to improve fertility in Bos indicus postpubertal heifers and nonlactating cows submitted to fixed-time artificial insemination

Two experiments were designed to evaluate strategies to increase fertility of Bos indicus postpubertal heifers and nonlactating cows submitted to a fixed-time artificial insemination (TAI) protocol consisting of an intravaginal device containing 1.9 g of progesterone (CIDR) insertion + estradiol benzoate on Day 0, CIDR withdrawal + estradiol cypionate on Day 9, and TAI on Day 11. In Experiment 1, heifers (n = 1153) received a new or an 18-d previously used CIDR and, on Day 9, prostaglandin F(2 alpha) (PGF(2 alpha)) + 0, 200, or 300 IU equine chorionic gonadotropin (eCG). Heifers treated with a new CIDR had greater (least squares means +/- SEM) serum concentration of progesterone on Day 9 (3.06 +/- 0.09 ng/mL vs. 2.53 +/- 0.09 ng/mL; P < 0.05) and a smaller follicle at TAI (11.61 +/- 0.11 nim vs. 12.05 +/- 0.12 mm; P < 0.05). Heifers with smaller follicles at TAI had lesser serum progesterone, concentrations on Day 18 and reduced rates of ovulation, conception, and pregnancy (P < 0.05). Treatment with eCG improved (P < 0.05) follicle diameter at TAI (11.50 +/- 0.10 mm, 11.90 +/- 0.11 mm, and 12.00 +/- 0.10 mm, for 0, 100, and 200 IU, respectively), serum progesterone concentration on Day 18 (2.77 +/- 0.11 ng/mL, 3.81 +/- 0.11 ng/mL, and 4.87 +/- 0.11 ng/mL), and rates of ovulation (83.8%, 88.5%, and 94.3%) and pregnancy (41.3%, 47.0%, and 46.7%). In Experiment 2, nonlactating Nelore cows (n = 702) received PGF(2 alpha) treatment on Days 7 or 9 and, on Day 9, 0 or 300 IU cCG. Cows receiving PGF(2 alpha) on Day 7 had lesser serum progesterone concentrations on Day 9 (3.05 +/- 0.21 ng/mL vs. 4.58 +/- 0.21 ng/mL; P < 0.05), a larger follicle at TAI (11.54 +/- 0.21 mm vs. 10.84 +/- 0.21 mm; P < 0.05), and improved (P < 0.05) rates of ovulation (85.4% vs. 77.0%), conception (60.9% vs. 47.2%), and pregnancy (52.0% vs. 36.4%). Treatment with eCG improved (P < 0.05) serum progesterone concentration on Day 18 (3.24 +/- 0.14 ng/mL vs. 4.55 +/- 0.14 ng/mL) and the rates of ovulation (72.4% vs. 90.0%) and pregnancy (37.5% vs. 50.8%). In conclusion, giving PGF(2 alpha) earlier in the protocol in nonlactating cows and eCG treatment in postpubertal heifers and nonlactating cows improved fertility in response to a TAI (progesterone + estradiol) protocol. (C) 2009 Elsevier B.V. All rights reserved.

Comparison of progesterone-based protocols with gonadotropin-releasing hormone or estradiol benzoate for timed artificial insemination or embryo transfer in lactating dairy cows

The objective was to compare two protocols for synchronizing ovulation in lactating Holstein cows submitted to timed AI (TAI) or timed ET (TET). Within each farm (n = 8), cows (n = 883; mean +/- SEM 166.24 +/- 3.27 d postpartum, yielding 36.8 +/- 0.34 kg of milk/d) were randomly assigned to receive either: 1) an intravaginal progesterone insert (CIDR (R)) with 1.9 g of progesterone + GnRH on Day -10, CIDR (R) withdrawal + PGF2 alpha on Day -3, and 1 mg estradiol cypionate on Day -2 (treatment GP-P-E; n(TAI) = 180; n(TET) = 260); or 2) a CIDR (R) insert + 2 mg estradiol benzoate on Day -10, PGF2 alpha on Day -3, CIDR (R) withdrawal + 1 mg estradiol cypionate on Day -2 (treatment EP-P-E; n(TAI) = 174; n(TET) = 269). Cows were subsequently randomly assigned to receive either TAT on Day 0 or TET on Day 7. Serum progesterone concentration on Day -3 was greater in GP-P-E than in EP-P-E (2.89 +/- 0.15 vs 2.29 +/- 0.15 ng/mL; P < 0.01), with no significant effect of group on serum progesterone on Day 7. Compared to cows submitted to TAI, those submitted to TET had greater pregnancy rates on Day 28 (44.0% [233/5291 vs 29.7% [105/354]; p < 0.001) and on Day 60 (37.6% [199/529] vs 26.5 [94/354]; P < 0.001). However, there were no effects of treatments (GP-P-E vs EP-P-E; P > 0.10) on synchronization (87.0% [383/440] vs 85.3% [378/443]), conception (TAI: 35.3% [55/156] vs 33.8% [50/148]; TET: 50.7% [115/227] vs 51.3% [118/230]) and pregnancy rates on Days 28 (TAT: 30.5% [55/180] vs 28.7% 150/174]; TET: 44.2% [115/260] vs 43.9% [118/2691) and 60 (TAI: 27.2% [49/80] vs 25.9% [45/174]; TET: 38.8% [101/260] vs 36.4% [98/269]). In conclusion, GP-P-E increased serum progesterone concentrations on Day -3, but rates of synchronization, conception, and pregnancy were not significantly different between cows submitted to GP-P-E and EP-P-E protocols, regardless of whether they were inseminated or received an embryo. (c) 2011 Elsevier B.V. All rights reserved.

Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment

Direct relining of dentures made with hard chairside reline resins is faster than laboratory-processed reline systems and the patient is not without the prosthesis for the time necessary to perform the laboratory procedures. However, a weak bond between the autopolymerizing acrylic reline resins and the denture base material has been observed. This study evaluated the effect of six different surface treatments on the bond strength between a hard chairside reline acrylic resin and ia heat-cured acrylic resin. Specimens of the heat-cured acrylic resin were divided into seven groups. one of these groups remained intact. In the other groups, a 10-mm square section was removed from the centre of each specimen. The bonding surfaces were then treated with (i) methyl methacrylate monomer, (ii) isobutyl methacrylate monomer, (iii) chloroform, (iv) acetone, (v) experimental adhesive and (vi) no surface treatment-control group. Kooliner acrylic resin was packed,into the square sections and polymerized. The bonding strength was evaluated by a three-point loading test. The results were submitted to one-way analysis of variance (ANOVA) followed by a Tukey multiple range test at a 5% level of significance. No significant difference was found between the surface treatment with Lucitone 550 monomer or chloroform, but both were stronger than the majority of the other groups. The bond strength provided by all the surface treatments was lower than that of the intact heat-cured resin.

The Effect of Splint Material Rigidity in Implant Impression Techniques

Purpose This in vitro study compared the dimensional accuracy of two impression techniques Duralay splinted impression copings (D) and metal splinted impression copings (M) for implant supported pros theses Materials and Methods A master cast with four parallel implant abutment analogs and a passive framework were fabricated Vinyl polysiloxane impression material was used for all impressions with a metal stock tray Two groups (D and M) were tested (n = 5) The measurement method employed was just one titanium screw tightened to the framework Each group s measurements were analyzed using software that received the images of a video camera coupled to a stereomicroscope at X100 magnification The results were analyzed statistically (t test) Results The mean values of abutment/framework interface gaps were master cast = 32 mu m (SD 2), group D = 165 mu m (SD 60), and group M = 69 mu m (SD 36) There was a statistically significant difference between the D and M groups (P <= 001) Conclusion Under the limitations of this study, it could be suggested that a more accurate working cast can be fabricated using metal splinted impression copings INT J ORAL MAXILLOFAC IMPLANTS 2010 25 1153-1158

Espectro de gotas de pontas de pulverização com adjuvantes de uso agrícola

O sucesso de uma boa aplicação de produtos fitossanitários depende da sinergia entre fatores como tamanho de gota, tipo de ponta, pressão, volume e composição da calda e características do alvo. Assim, o objetivo deste trabalho foi avaliar o espectro de gotas produzidas por pontas de jato plano defletor (TT 11002) e jato plano defletor com indução de ar (TTI 11002), com diferentes adjuvantes adicionados à calda de pulverização, pela técnica de difração de raio laser. O experimento foi conduzido em delineamento inteiramente casualizado, com quatro repetições, em esquema fatorial 2 x 5, ou seja, duas pontas de aplicação (jato plano defletor e jato plano defletor com indução de ar) e cinco composições de calda (água e água mais quatro adjuvantes: fosfatidilcoline+ácido propiônico, éter poliglicólico de monilfenol, ésteres de ácidos graxos e nonil-fenol etoxilado+óxido de etileno). em ambiente controlado, avaliou-se o espectro de gotas, por meio de um analisador a laser de gotas em tempo real, na pressão de 276 kPa. O efeito dos adjuvantes no espectro de gotas mostrou-se dependente da ponta de pulverização empregada. A adição dos adjuvantes à calda não alterou o risco potencial de deriva, expresso pela porcentagem do volume em gotas com diâmetro inferior a 100 µm, porém o adjuvante fosfatidilcoline+ácido propiônico reduziu o diâmetro da mediana volumétrica das gotas produzidas pela ponta de jato plano defletor com indução de ar, em relação à avaliação feita somente com água.

Structural carbon/epoxy prepregs properties comparison by thermal and rheological analyses

Two different carbon/epoxy prepreg materials were characterized and compared using thermal (DSC, TGA, and DMA) and rheological analyses. A prepreg system (carbon fiber preimpregnated with epoxy resin F584) that is currently used in the commercial airplane industry was compared with a prepreg system that is a prospective candidate for the same applications (carbon fiber prepreg/epoxy resin 8552). The differences in the curing kinetics mechanisms of both prepreg systems were identified through the DSC, TGA, DMA, and rheological analyses. Based on these thermal analysis techniques, it was verified that the curing of both epoxy resin systems follow a cure kinetic of n order. Even though their reaction heats were found to be slightly different, the kinetics of these systems were nevertheless very similar. The activation energies for both prepreg systems were determined by DSC analysis, using Arrhenius's method, and were found to be quite similar. DMA measurements of the cured prepregs demonstrated that they exhibited similar degrees of cure and different glass transition temperatures. Furthermore, the use of the rheological analysis revealed small differences in the gel temperatures of the two prepreg systems that were examined.

DIAGNOSIS of REGIONAL CEREBRAL BLOOD FLOW ABNORMALITIES USING SPECT: AGREEMENT BETWEEN INDIVIDUALIZED STATISTICAL PARAMETRIC MAPS and VISUAL INSPECTION BY NUCLEAR MEDICINE PHYSICIANS WITH DIFFERENT LEVELS of EXPERTISE IN NUCLEAR NEUROLOGY

INTRODUCTION: Visual analysis is widely used to interpret regional cerebral blood flow (rCBF) SPECT images in clinical practice despite its limitations. Automated methods are employed to investigate between-group rCBF differences in research Studies but have rarely been explored in individual analyses.OBJECTIVES: To compare visual inspection by nuclear physicians with the automated statistical parametric mapping program using a SPECT dataset of patients with neurological disorders and normal control images.METHODS: Using statistical parametric mapping, 14 SPECT images from patients with various neurological disorders were compared individually with a databank of 32 normal images using a statistical threshold of p<0.05 (corrected for multiple comparisons at the level of individual voxels or clusters). Statistical parametric mapping results were compared with Visual analyses by a nuclear physician highly experienced in neurology (A) as well as a nuclear physician with a general background of experience (B) who independently classified images as normal or altered, and determined the location of changes and the severity.RESULTS: of the 32 images of the normal databank, 4 generated maps showing rCBF abnormalities (p<0.05, corrected). Among the 14 images from patients with neurological disorders, 13 showed rCBF alterations. Statistical parametric mapping and physician A completely agreed on 84.37% and 64.28% of cases from the normal databank and neurological disorders, respectively. The agreement between statistical parametric mapping and ratings of physician B were lower (71.18% and 35.71%, respectively).CONCLUSION: Statistical parametric mapping replicated the findings described by the more experienced nuclear physician. This finding suggests that automated methods for individually analyzing rCBF SPECT images may be a valuable resource to complement visual inspection in clinical practice.

Avaliação das respostas fisiológicas de bezerros Zebuínos puros e cruzados nascidos em clima subtropical

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preemptive dexamethasone and etoricoxib for pain and discomfort prevention after periodontal surgery: A double-masked, crossover, controlled clinical trial

Background: Several anti-inflammatory drugs have been used to reduce pain and discomfort after periodontal surgeries. This study evaluates the efficacy of using etoricoxib and dexamethasone for pain prevention after open-flap debridement surgery. Methods: For this prospective, double-masked, crossover, placebo-controlled, randomized clinical trial, open-flap debridement surgeries were performed on 15 patients (eight males and seven females, age range 20 to 56 years: mean age ± SD: 40 ± 9.7 years) who presented with chronic periodontitis after nonsurgical periodontal therapy at three quadrants. Each patient underwent three surgical procedures at intervals of 30 days and received one of the following premedication protocols 1-hour before surgery: group 1 = placebo, group 2 = 8 mg dexamethasone, and group 3 = 120 mg etoricoxib. Rescue medication (750 mg acetaminophen) was given to each patient who was instructed to take it when necessary. Pain intensity and discomfort were evaluated by a 101-point numeric rate scale and a four-point verbal rate scale, respectively, hourly for the first 8 hours after surgery and three times a day on the following 3 days. Results: The results demonstrate that groups 2 and 3 present reduced postoperative pain-intensity levels compared to group 1. There were statistically significant differences at the 4, 5, 6, 7, and 8 hour-periods after surgery (Friedman test; P<0.05). Furthermore, rescue-medication intake was significantly lower for groups 2 and 3 than for group 1 (analysis of variance; P<0.02). Conclusion: The adoption of a preemptive medication protocol using etoricoxib or dexamethasone may be considered effective for pain and discomfort prevention after open-flap debridement surgeries.