Implante de biomateriais e a consolidação óssea em cadelas submetidas à ovariossalpingo-histerectomia

Avaliou-se a hidroxiapatita com alandronato e hidroxiapatita com colágeno na aceleração da consolidação óssea do rádio de cadelas adultas submetidas à ovariossalpingo-histerectomia (OSH). Utilizaram-se 14 cadelas adultas, distribuídas aleatoriamente em dois grupos: grupo-controle e grupo OSH (submetidas à OSH). Quatro meses após a OSH, as cadelas dos dois grupos foram submetidas à cirurgia para produção de uma falha óssea de 4mm de diâmetro nos terços distal e proximal do rádio. No terço distal do membro direito, foi utilizada a hidroxiapatita com alandronato e, no membro esquerdo, a hidroxiapatita com colágeno; no terço proximal, não se utilizou nenhum biomaterial. Houve retardo na consolidação das falhas ósseas nas cadelas submetidas à OSH comparadas com as não submetidas. A hidroxiapatita com alandronato acelerou o processo de reparação e, em todos os animais dos dois grupos, a densidade óssea foi significativamente maior no terço distal onde foi implantada. Os dois biomateriais apresentaram biocompatibilidade, constatada pela ausência de reação inflamatória ou outra reação indesejável.

A quantitative nature of somatic embryogenesis in soybean

The objectives of this research were to investigate the genetic parameters associated with the in vitro formation of somatic embryos in soybean and to determine the effect of light intensity on the embryogenic capability of F-1, F-2, and backcross (RC1P1 and RC1P2) progenies derived from crosses between embryogenic (IAS-5 and Embrapa-1) and nonembryogenic (Parana) cultivars. Immature cotyledons (4-6 mm in length) derived from the parental lines, F-1, F-2, RC1P1, and RC1P2 were grown for 90 d on the inductive N10 medium, after which the number of somatic embryos was recorded. Chi-square tests for goodness of fit showed that the genetic component of the somatic embryogenesis trait is controlled in a quantitative manner by approximately 10 genes. A normal distribution for somatic embryo formation in the F-2 generations was observed reinforcing the quantitative nature of the trait. Variation in light intensity (8-12 and 27-33 mu mol m(-2) s(-1)) had no effect on somatic embryo formation in the parental material tested.

Micropropagation of fig (Ficus carica L.) 'Roxo de Valinhos' plants

An in vitro protocol for Ficus carica cv. 'Roxo de Valinhos' was optimized. Nodal explants containing two buds were excised from field-grown mature plants, and transferred to different proliferation media consisting of combinations of distinct concentrations of activated charcoal with benzyladenine (BA), kinetin with gibberellic acid (GA(3)), and WPM (woody plant medium) with kinetin. The regular strength of WPM in combination with 0.5 mg l(-1) kinetin was the best condition for shoot proliferation of Ficus carica 'Roxo de Valinhos' plants. The addition of activated charcoal in the medium completely inhibited shoot proliferation. The inclusion of BA in the medium induced excessive callus formation as well as small and vitrified shoots, while GA(3) induced excessive elongation associated with vitrification, chlorosis, and tip-burned shoots.

Avaliação econômica do uso da restrição alimentar qualitativa para suínos com elevado peso de abate

O objetivo neste trabalho foi avaliar economicamente o uso da restrição alimentar qualitativa para suínos machos castrados em terminação sobre o desempenho e as características de carcaça de 60 animais. Dez suínos foram abatidos no início da fase experimental (89,0 ± 4,2 kg) e os demais, alimentados com rações contendo cinco níveis de restrição nutricional qualitativa (0, 5, 10, 15 e 20%), obtidas pela inclusão de casca de arroz finamente moída, até o final do experimento (127,8 ± 2,9 kg). Foram calculados os custos com alimentação durante o período experimental (R$alimento) e estimados os valores de receita bruta de cada carcaça de animais abatidos aos 128 kg (RBsuíno128kg) ou no início do experimento (RBmédia_suíno89kg). A partir destes três dados, foi calculado o resultado líquido (RL) do uso das dietas experimentais (RL = RBsuíno128kg - RBmédia_suíno89kg - R$alimento). Também foram analisadas as variações mensais dos preços do milho, do farelo de soja e do suíno, sendo determinado o preço do milho como o fator de maior impacto sobre a lucratividade do uso da restrição qualitativa. A equação de predição da probabilidade de aumento linear do resultado líquido pelo uso da restrição qualitativa foi determinada em função dos diferentes preços do milho - PM (valor de P RL = 0,392 - 0,625PM, R² = 0,73). Efeito significativo foi observado para preços do milho de cerca de quatro vezes ou mais acima do custo da casca de arroz. Assim, conclui-se que a viabilidade do uso da restrição qualitativa, até o nível de 20%, depende do cenário econômico, mas sobretudo do preço do milho, o principal ingrediente substituído nas rações ao empregar-se a restrição qualitativa, e de sua relação com o custo do resíduo utilizado para diluição energética.

Improvement of heart rate variability after exercise training and its predictors in COPD

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effectiveness of Photogem (R) activated by LED on the decontamination of artificial carious bovine dentin

The aim of this study was the evaluation of the effectiveness of photodynamic therapy on the decontamination of artificially induced carious bovine dentin, using Photoge(R) as the photosensitizer agent and an LED device as a light source. Dentin samples obtained from bovine incisors were immersed in sterile broth supplemented by Lactobacillus acidophillus 10(8) colony formation units (CFU) and Streptococcus mutans 10 8 CFU. Different concentrations of photosensitizer, PA = 1 mg/ml, PB = 2 mg/ml, and PC = 3 mg/ml, and two fluences, D = 24 J/cm(2) and D = 48 J/cm(2), were investigated. After CFU counting per milligram of carious dentin and statistical analysis, we observed that the photodynamic therapy (PDT) parameters used were effective for bacterial reduction in the in vitro model under study. The best result was achieved with the application of Photoge(R) at 2 mg/ml and photoactivated under 24 J/cm(2) showing a survival factor of 0.14. At higher photosensitizer concentrations, a higher dark toxicity was observed. We propose a simple mathematical expression for the determination of PDT parameters of photosensitizer concentration and light fluence for different survival factor values. Since LED devices are simpler and cheaper compared to laser systems, it would be interesting to verify their efficacy as a light source in photodynamic therapy for the decontamination of carious dentin.

Physical research in dynamized systems

The concept of dynamized medicines is commonly used in homeopathy. As a medical practice, homeopathy is based on clinical observations and experimental assays. In spite of the lack of a credible scientific explanation for its action mechanisms, clinical evidence has been collected since 200 years ago. This paper discusses the most important physical models related to dynamized systems, as well as some perspectives and consequences in studying such systems. While early theories dealt with structural changes in single solvent molecules, modern theories consider collective effects and self-organizing properties. The concept of information was recently introduced to model the capability of a dynamized system to interact with a biological organism, without a molecular agent being needed. The features and limitations of theoretical approaches, as well as experimental results are discussed. (C) 2002 Published by Elsevier B.V. Ltd.

Sequencing and expression analysis of hepcidin mRNA in donkey (Equus asinus) liver

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Color alteration in teeth subjected to different bleaching techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Increased Viability of Odontoblast-Like Cells Subjected to Low-Level Laser Irradiation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histological analyses of thermal effect caused by 1.2 W diode laser irradiation at rat periodontal pockets

The aim of this in vivo study was to evaluate the thermal effects caused by 810 nm 1.2 W diode laser irradiation of periodontal tissues. Despite all data available concerning the laser application for periodontal treatment, one of the most relevant challenges is to prevent the harmful tissue heating induced by different clinical protocols. Periodontal pockets were induced at molars in 96 rats. Several irradiation powers under CW mode were investigated: 0, 400, 600, 800, 1000, 1200 mW. The pockets were irradiated using a 300 A mu m frontal illumination fiber. The animals were killed at 4 or 10 days after irradiation. The mandible was surgically removed and histologically processed. The histological sections stained with H/E demonstrated that irradiation parameters up to 1000 mW were thermally safe for the periodontal tissues. The sections stained with Brown & Brenn technique evidenced bacteria in the periodontal tissues. Consequently, the diode laser irradiation as a unique treatment was not capable to eliminate bacteria of the biofilm present in the pockets. According to the methodology used here, it was concluded that the thermal variation promoted by a diode laser can cause damage to periodontal tissues depending on the energy density used. The 1.2 W diode laser irradiation itself does not control the bacteria present in the biofilm of the periodontal pockets without mechanical action. The knowledge of proper high intensity laser parameters and methods of irradiation for periodontal protocols may prevent any undesirable thermal damage to the tissues.

Comparative Histopathological Analysis of Human Pulps after Class I Cavity Preparation with a High-Speed Air-Turbine Handpiece or Er:YAG Laser

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of red and infrared low-level laser therapy in endodontic sealer on subcutaneous tissue

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of light curing sources on microhardness of different composite resins

This study evaluated the influence of light-curing units (LCUs) on Knoop microhardness (KHN) of different composite resins formulations. Four LCUs, one Quartz-Tungsten-Halogen (QTH) for 20 s, one Argon-Ion-Laser (AL) for 10 s, one Plasma-Arc-Curing (PAC) for 9 s, and one Light-Emitting-Diode (LED) for 20 s, and three composite resins, nanofill and easy cure (Filtek (TM) Supreme), microhybrid and medium cure (Herculite XRV), and microfill and difficult cure (Heliomolar) were used. Discs (4 x 2 mm(2)) of each composite resin were divided in 12 Groups and KHN was measured at the top (T) and bottom (B) surfaces. Data were analyzed using two-way ANOVA and Tukey's test (p < 0.05). Top presented significantly higher KHN than bottom surface for all composite resins and LCUs tested. Statistical significant differences were observed among the LCUs. At the bottom surface QTH and LED presented higher KHN than PAC and LA. However, at the top surface PAC and LA presented similar results than QTH for nanofill and microhybrid composite resins. Different LCUs play an important effect on Knoop microhardness and the composite resin formulations were significant factor on the photosensitivity.