Effect of immersion cleansers on the bond strength between a denture base resin and acrylic resin teeth

The aim of the present study was to assess the shear bond strength between a heat-polymerized denture base resin and acrylic resin teeth after immersion in different denture cleansers by simulating a 180-day use. Two acrylic teeth (Biotone, Biotone IPN, Dentsply Ind. e Com., Rio de Janeiro, RJ, Brazil) were chosen for bonding to a heat-polymerized denture base resin (Lucitone 550- Dentsply Ind. e Com., Rio de Janeiro, RJ, Brazil). Eighty specimens were produced and divided into eight groups (n=10) according to their experimental condition (distilled water, 2% chlorhexidine digluconate, 1% sodium hypochlorite and Corega Tabs). Shear bond strength tests (MPa) were performed with a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed by two-way analysis of variance (ANOVA) and Student-Newman-Keuls' multiple comparisons post hoc analysis (α=.05). The shear bond strength results revealed statistically significant differences between the groups. For the Biotone IPN tooth, significantly lower shear bond strength values were found for the group immersed in sodium-perborate solution (4.48±2.18 MPa) than for the group immersed in distilled water (control group) (10.83±1.84 MPa). For Biotone, significantly higher bond strength values (10.04±3.28 MPa) were found for the group immersed in Corega Tabs than for the control group (5.45±2.93 MPa). The immersion in denture cleanser solutions was more detrimental to the conventional acrylic denture tooth (Biotone) than to the highly cross-linked denture tooth (Biotone IPN). However, this effect was not observed for the groups immersed in Corega Tabs solution, regardless of the type of denture tooth. © 2013 Elsevier Ltd.

In vitro transdentinal effect of low-level laser therapy

Low-level laser therapy (LLLT) has been used for the treatment of dentinal hypersensitivity. However, the specific LLL dose and the response mechanisms of these cells to transdentinal irradiation have not yet been demonstrated. Therefore, this study evaluated the transdentinal effects of different LLL doses on stressed odontoblast-like pulp cells MDPC-23 seeded onto the pulpal side of dentin discs obtained from human third molars. The discs were placed in devices simulating in vitro pulp chambers and the whole set was placed in 24-well plates containing plain culture medium (DMEM). After 24 h incubation, the culture medium was replaced by fresh DMEM supplemented with either 5% (simulating a nutritional stress condition) or 10% fetal bovine serum (FBS). The cells were irradiated with doses of 15 and 25 J cm-2 every 24 h, totaling three applications over three consecutive days. The cells in the control groups were removed from the incubator for the same times as used in their respective experimental groups for irradiation, though without activating the laser source (sham irradiation). After 72 h of the last active or sham irradiation, the cells were evaluated with respect to succinic dehydrogenase (SDH) enzyme production (MTT assay), total protein (TP) expression, alkaline phosphatase (ALP) synthesis, reverse transcriptase polymerase chain reaction (RT-PCR) for collagen type 1 (Col-I) and ALP, and morphology (SEM). For both tests, significantly higher values were obtained for the 25 J cm-2 dose. Regarding SDH production, supplementation of the culture medium with 5% FBS provided better results. For TP and ALP expression, the 25 J cm-2 presented higher values, especially for the 5% FBS concentration (Mann-Whitney p < 0.05). Under the tested conditions, near infrared laser irradiation at 25 J cm -2 caused transdentinal biostimulation of odontoblast-like MDPC-23 cells. © 2013 Astro Ltd.

Regular and switching platform: Bone stress analysis with varying implant diameter

The aim of this study was to evaluate stress distribution of the peri-implant bone by simulating the biomechanical influence of implants with different diameters of regular or platform switched connections by means of 3-dimensional finite element analysis. Five mathematical models of an implant-supported central incisor were created by varying the diameter (5.5 and 4.5 mm, internal hexagon) and abutment platform (regular and platform switched). For the cortical bone, the highest stress values (rmax and rvm) were observed in situation R1, followed by situations S1, R2, S3, and S2. For the trabecular bone, the highest stress values (rmax) were observed in situation S3, followed by situations R1, S1, R2, and S2. The influence of platform switching was more evident for cortical bone than for trabecular bone and was mainly seen in large platform diameter reduction.

Qualidade de mangas cv. palmer após armazenamento sob baixas temperaturas

This study aimed to evaluate the quality of 'Palmer' mangoes previously stored at low temperatures, after their transference to the environmental condition. Fruits harvested at physiological maturity were carefully transported to the Laboratory where they were selected, standardized as the color, size and absence of injuries and treated with fungicide before they were stored at 2°C (75.7% RH), 5°C (73.8% RH) e 12°C (82% RH) for 7, 14 and 21 days. At the end of each period, the fruits were transferred to environmental condition (22.9°C; 62.3% RH), where they were kept for 1, 3, 5 and 7 days, simulating the trading period, and evaluated for the occurrence of injuries and rottenness; peel and pulp color; firmness; contents of soluble solids, titratable acidity and ascorbic acid, as well as, the activities of the enzymes peroxidase, polyphenoloxidase and phenylalanine ammonia-lyase. The results indicated that 'Palmer' mangoes can be stored at 12°C for 21 days without damage to ripening, but with limitations due to the occurrence of decay. The storage at 2°C and 5°C was limited by the occurrence of injuries in the peel, but at the temperature of 2°C these symptoms were more severe and compromised the development of the characteristic color of the peel. However, the ripening of the pulp was not harmed, but this process occurred with less intensity than in mangoes maintained at 12°C.

Development and application of an electronic tongue for detection and monitoring of nitrate, nitrite and ammonium levels in waters

This work presents the first study and development of an electronic tongue analysis system for the monitoring of nitrogen stable species: nitrate, nitrite and ammonium in water. The electronic tongue was composed of an array of 15 potentiometric poly(vinyl chloride) membrane sensors sensitive to cations and anions plus an artificial neural network (ANN) response model. The building of the ANN model was performed in a medium containing sodium, potassium, and chloride as interfering ions, thus simulating real environmental samples. The correlation coefficient in the cross-validation of nitrate, nitrite and ammonium was satisfactory in the three cases with values higher than 0.92. Finally, the utility of the proposed system is shown in the monitoring of the photoelectrocatalytic treatment of nitrate. © 2013 Elsevier B.V.

Eficácia do herbicida mesotrione aplicado no sistema de cana crua

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Liberação de nitrogênio e potássio da palha de café em função da adubação nitrogenada

Pós-graduação em Agronomia (Agricultura) - FCA

Volume de aplicação na qualidade da deposição da pulverização na cutura do algodoeiro

Pós-graduação em Agronomia (Agricultura) - FCA

Simulação do caminhamento de herbicidas em diferentes tipos e quantidades de palhadas utilizadas no sistema de plantio direto

Pós-graduação em Agronomia (Agricultura) - FCA

Posicionamento por ponto preciso estático e cinemático: implementação e análise

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação da velocidade de um objeto, a partir de uma seqüência de imagens, aplicando as equações de colinearidade modificadas

Pós-graduação em Ciências Cartográficas - FCT

Comparação dos padrões cinemáticos de chutes realizados por participantes com 15 e 17 anos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparação do padrão cinemático do chute no futebol entre jogadores de dois países

Pós-graduação em Ciências da Motricidade - IBRC

Efeito da duração do intervalo em saltos verticais: relações entre trabalho realizado e duração até a exaustão

Pós-graduação em Ciências da Motricidade - IBRC

Estudo da dinâmica do modelo de Peyrard-Bishop não homogêneo para o DNA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)