The influence of the alveolar ridge shape on the stress distribution in a free-end saddle removable partial denture supported by implant

The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.

Aeroelastic Analysis of a Typical Section Using of Shape memory wire actuator

Shape memory alloys (SMAs) provide a compact and effective actuation for a variety of mechanical systems. In this paper, a numerical simulation study of a three degree of-freedom airfoil, subjected to two-dimensional incompressible inviscid flow using a SMA is presented. SMA wire actuators are used to control the flap movement of a wing section. Through the thermo-mechanical constitutive equation of the SMA proposed by Brison, we simulate numerically the behavior of a double SMA wire actuator. Two SMA actuators are used: one to move the flap down and the other to move the flap up. Through the numerical results conducted in the present study, the behavior and characteristics of an SMA actuator with two SMA wires are shown the effectiveness of the SMA actuator. In conclusion, this paper shows the feasibility of using SMA wire actuators for flap movement, with success

Análise morfométrica e simulação das áreas de preservação permanente de uma bacia hidrográfica

The morphometric characterization of watersheds is of great importance in assisting the planning of these areas to preserve the environment and maintain the quantity and quality of water production. The aim of this study was to characterize the morphology and simulate the areas of permanent preservation according to the Brazilian Forest Code of watershed of the Água-Fria stream. The studied area is located in the municipality of Bofete-SP, between the geographic coordinates: 48° 09' 30" to 48° 18' 30" longitude (WGr) and 22° 58' 30" to 23° 04' 30" latitude S. The results showed a 5th order micro watershed with an area of 152.43 km2 and low drainage density of 1.04 km/km2. Circularity was 0.51 and form factor was 0.41, which is considered low, and therefore with an oblong/oval shape. The sinuosity index of 1.29 revealed a tendency of rectilinear channels with compactness coefficient value of 1.38 and distance of runoff flow of 520m. Simulation of areas of permanent preservation shows an ideal model as the way springs and watercourses should be protected according to the Brazilian Forest Code, amounting to an area of 10.02 km2.

Geoprocessamento de variáveis morfométricas para caracterização da microbacia do Córrego do Petiço

This study aims to perform the morphometric characterization of the watershed stream Petiço, Botucatu-SP, through techniques of GIS by GIS IDRISI Selva and Charter planialtimetric Botucatu (SF-22-ZB-VI-3) , edited by IBGE (1969), scale 1: 50000 for ranking the drainage network and the morphometric analysis. The variables analyzed were the dimensions, the relief pattern, pattern of the drainage network and the shape variables. The results show that related to how the watershed has an oblong shape with environmental interpretation with low tendency to flooding and erosion. The sinuosity index of 1.22 shows that the channels of the micro tend to be somewhat sinuous, which allows to infer that is permeable soil with good water infiltration. Based on the results of the morphometric variables was found that the watershed is in good condition of conservation, however, presents certain risks of susceptibility to erosion, and environmental degradation in some points, being fundamental to the maintenance of vegetation cover, in view of the roughness coefficient (Rn). Thus, the evaluation of morphometric characteristics in the study watershed constitutes an important tool in conjunction with the use of GIS and Geographic Information Systems makes possible the planning and management of natural resources aimed at their conservation.

Geoprocessamento aplicado na caracterização morfométrica da microbacia do Ribeirão Descalvado - Botucatu (SP)

The objective of this study was to evaluate geoprocessing to morphometrically characterize the Ribeirão Descalvado micro watershed – Botucatu, SP by the Geographic Information System (GIS) – Selva for preservation, rationalization of its use and environmental restoration. The micro watershed is 2,228.61 ha between the geographic coordinates: 22° 50' 05" to 22° 54' 26" latitude S and 48° 22' 29" to 48° 26' 36" longitude W Gr. The cartographic basis was the planialtimetric chart of Botucatu (SP), 1: 50000 scale (IBGE, 1969), used for extraction of level, hydrography and topography curves to determine morphometric indices. The results showed that low values of drainage density associated with the presence of permeable rocks facilitates ground water infiltration which decreases surface runoff, erosion risks and environmental degradation. The low value of the shape factor supported by the circularity index shows that the micro watershed is more elongated and at lower risk of more pronounced floods. The roughness coefficient environmental parameter classified the micro watershed for forest and reforestation.

Geomática aplicada na caracterização conservacionista de uma bacia hidrográfica no município de São Manuel (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)