Nível de atividade física no lazer em usuários do Sistema Único de Saúde

Although leisure physical activity has been investigated in general population, there is absence of data in Brazilian Public Health System about this issue. Thus, the purpose of this study was to analyze in patients attended by Public Health System the prevalence of leisure physical activity, as well as, to identify its correlates and associated diseases. Sample was composed by 963 patients (707 female and 256 male) randomly selected at five basic healthcare units. Leisure physical activity was assessed by Baecke’s questionnaire and subjects with ≥180 and ≥240 minutes per week were classified as sufficiently active. General and central obesity were assessed by body mass index and waist circumference, respectively. Diseases of high occurrence were classified according CID-10. There was low rate of physically active subjects in leisure time (14.8%),but high rate of abdominal obesity (70.1%) and orthopedic diseases (72.1%). Physically active subjects in leisure time had lower occurrence of orthopedic diseases (OR= 0.60 [OR95%CI: 0.37 – 0.98]). The same pattern of association was observed for central obesity (OR= 0.35 [OR95%CI: 0.19 – 0.65]). It is low the rate of physically active in leisure time at Brazilian Public Health System, which is associated with orthopedic diseases.

Avaliação da cavidade uterina com histerossonografia, uma revisão

Sonohysterography was firstly described three decades ago. The saline solution infusion into the uterine cavity favors its use and provides excellent visualization of the anatomy and the inner cavity of the uterus better than the conventional transvaginal sonography To check the current role of sonohysterography in the uterine cavity assessment in women with abnormal uterine bleeding and asymptomatic, a literature review comparing sonohysterograph with conventional transvaginal sonography and/or ambulatory diagnostic hysteroscopy was carried out. To this end, relevant studies were researched in electronic databases Medline/PubMed, SciELO/LILACS. The sonohysterography is an ambulatory procedure, non-invasive, better cost-benefit, better sensitivity and specificity to identify uterine abnormalities, causing minimal discomfort and low complications rate. It was subject to revision which there is no more doubt about its accuracy. It can be concluded that the sonohysterography is a useful tool in the propedeutics to assess uterine cavity of symptomatic patients with abnormal uterine bleeding, infertility, recurrent miscarriages, and embryonic implantation failures in assisted reproduction treatment / in vitro fertilization and in any other intra and extra uterine cavity alteration. Hence, conventional transvaginal sonography is indicated as an initial method of assessment of the uterine cavity previously to ambulatory diagnostic hysteroscopy.

Estudo da reação de dissolução de serpentinitos brasileiros para uso em processo de captura de carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modulação da doença periodontal por curcumin modificado quimicamente. Estudo de dose-resposta em roedor

Pós-graduação em Odontologia - FOAR

SnO 2 ceramics with low electrical resistivity obtained by microwave sintering

The main aim of this study was to develop dense and conducting SnO 2 ceramics without precipitated phases on the grain boundaries, which was verified using field emission scanning microscopy (FE-SEM) coupled with an energy-dispersive X-ray spectroscopy (FE-SEM/EDS). Two sample groups were investigated, where the first sample group was doped with zinc while the second one was doped with cobalt. The ceramics were prepared using the oxides mixture method and the sintering was carried out in a conventional muffle oven as well as in microwave oven. The results obtained were found to be similar regarding the relative density for the two sintering methods while time and temperature gains were observed for the microwave sintering method. The relative densities obtained were nearly 95%, for the two sintering methods. Concerning the electrical characterization measurements-electric field x current density as well as the environment temperature, the ceramics obtained through the conventional sintering method presented non-ohmic behavior. For the microwave sintered ceramics, we observed an ohmic behavior with electrical resistivity of 1.3 Ωcm for the samples doped with ZnO/Nb 2O 5 and 2.5 Ωcm for that of the samples doped with CoO/Nb 2O 5. The FE-SEM/EDS results for the microwave sintered ceramics indicated a structure with a reduced number of pores and other phases segregated at the grain boundaries, which leads to a better conductive ceramic than the conventional oven sintered samples. The dilatometry analysis determined the muffle sintering temperature and the difference between the densification of cobalt and zinc oxides. The addition of niobium oxide resulted in the decrease in resistivity, which thus led us to conclude that it is possible to obtain dense ceramics with low electrical resistivity based on SnO 2 using commercial oxides by the oxides mixture technique and the microwave oven sintering method. Copyright © 2011 American Scientific Publishers All rights reserved.

Toxin jararhagin in low doses induces interstitial edema and increases the metabolic rate and red blood cells in mice

Jararhagin is a metalloproteinase from Bothrops jararaca responsible for hemorrhage, inflammation, necrosis and edema. Effects of low doses of the toxin were analyzed on the energy metabolism of mice as well as its physiological implications. Measures of O-2 consumption (VO2) were quantified after 4 and 24 h of the jarathagin administration during four weeks. Hematocrit and histology of the lungs were also analyzed after the end of the treatment. Results showed that animals that received subcutaneous doses of jararhagin had significant increase in VO2 from second (120 ng) and third weeks (60 ng) after 4 and 24 h, comparing to control, as well as in the number of erythrocytes after four weeks. Histology of the lungs showed interstitial edema within the alveolar septum. Results suggest that the jararhagin toxin caused an increase in VO2 and edema of intra-alveolar septum. The increase of the erythrocytes could be a physiological response to adjust the higher necessity of oxygen, due to diffusional abnormalities caused by the edema. Thus, low doses of jararhagin promote endothelial edema which lead to changes in several physiological conditions. (c) 2006 Elsevier Ltd. All rights reserved.

Low power laser radiation at 685 nm stimulates stem-cell proliferation rate in Dugesia tigrina during regeneration

Today's scientific interest in tissue engineering for organ transplantations and regeneration from stem cells, allied with recent observations on biostimulation of tissues and cells by laser radiation, stands as a strong motivation for the present work, in which we examine the effects of the low power laser radiation onto planarians under regenerative process. To investigate those effects, a number of 60 amputated worms were divided in three study groups: a control group and two other groups submitted to daily 1 and 3 min long laser treatment sections at similar to 910 W/m(2) power density. A 685 nm diode laser with 35 mW optical power was used. Samples were sent to histological analysis at the 4th, the 7th and the 15th (lays after amputation. A remarkable increase in stem cells counts for the fourth day of regeneration was observed when the regenerating worms was stimulated by the laser radiation. Our findings encourage further research works on the influence of optical radiation onto stem cells and tissue regeneration. (c) 2005 Elsevier B.V. All rights reserved.

Sintering mechanisms of ZrO2 center dot MgO with addition of TiO2 and CuO

Substitutions of Ti and Cu in ZrO2.MgO (Z), cause transformation from monoclinic (m) to cubic (c) and tetragonal (t). According to the vacancy model and solid Solution formation models, neither CuO nor TiO2 cause zirconia stabilization, which derives front other phenomena. Data analysis by TMA using the CRH (constant rate of heating) method shows a solid state reaction of ZrO2.MgO.TiO2 (Z.TiO2) demonstrating a dominant mechanism of volume diffusion (n = 1). However, the sintering of ZrO2.MgO.CuO (Z.CuO) shows a viscous flow mechanism (n = 0), a similar phenomena to that of by sintering of glass. Transformations, such as: CuO to Cu2O at 1000 degreesC, ZrO2 (m) to ZrO2 (t) at 1100 degreesC and Cu2O (s) to Cu2O (l) at 1230 degreesC cause successive rearrangements of microstructure inside of region I (sintering process) and lead to interpretation errors when the Bannister equation is used. (C) 2003 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Impedance spectroscopy of SnO2: CoO during sintering

SnO2:m mol% CoO (0.5 less than or equal to m less than or equal to 6.0) ceramic specimens were studied by impedance spectroscopy in the 5 Hz-13 MHz frequency range during heating cold-pressed specimens from room temperature to 1250 degrees C. The electrical resistivity during sintering decreases from 4 to 6 orders of magnitude in the 400-1500 K temperature range depending on the amount of CoO. An increase in electrical resistivity in the 570-670 K range is related to the release of adsorbed water. The results for the 970-1500 K show that the higher the amount of the CoO addition, the lower is the temperature at which SnO2:CoO reaches a minimum electrical resistivity. This suggests that oxygen point defects created by dissolution of cobalt ions in the SnO2 lattice are controlling the densification rate of these ceramics.

Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications

In this research report, a sintering process of porous ceramic materials based on Al2O3 was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, the precursor solution and cotton were annealed at temperatures in the range of 100-1600°C using scanning electron microscopy (SEM) and thermogravimetric (TG) analysis to obtain a porous body formation and disposal process containing organic fibers and precursor solution. In a structure consisting of open pores and interconnected nanometric grains, despite the low porosity of around 40% (calculated geometrically), nitrogen physisorption determined a specific surface area of 14m2/g, which shows much sintering of porous bodies. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analytical methods revealed a predominant amount of α-Al2O3 in the sintered samples. Thermal properties of the sintered Al2O3 fibers were obtained by using the Laser Flash which resulted in the lower thermal conductivity obtained by α-Al2O3 and therefore improved its potential use as an insulating material. © 2012 Elsevier Ltd.

Decreased rate of protein synthesis, caspase-3 activity, and ubiquitin-proteasome proteolysis in soleus muscles from growing rats fed a low-protein, high-carbohydrate diet

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Feasibility of solar heating systems composed of recyclable packaging for low-income rural communities

Solar heaters are an appropriate technology in tropical and sub-tropical climates to heat bath water by solar energy. Low-cost solar heaters meet the demand of low-income rural communities which currently do not have access to this technology. Current research analyzes the economic viability of solar heaters, built with recyclable materials, to reduce electric energy bill. A solar heating system was built consisting of recyclable materials in accordance with the manuals provided by the Secretariat of Environment of the state of Paraná (SEMA). Duration of use of electric showers by families of rural properties was determined to calculate expenses and billing of electricity. Simulation and material costs showed that the system was feasible. Commercial solar heaters could be replaced at a cost of R$ 22.61 per month during 13 months.