Lumped element modeling of operational structures by inverting the mobility models

This paper is concerned with what a source precisely sees when it drives a receiver such as a continuous structural object. An equivalent lumped element system consisting of masses, springs and dampers is developed to visually represent the operational structural dynamics of a single-input structure at the driving point. The development is solely based on the mobility model of the driving point response. The mobility model is mathematically inverted to give the impedance model that is suitable for lumped element modeling. The two types of structures studied are unconstrained inertial objects and constrained resilient objects. The lumped element systems presented suggest a new view to dynamics that a single-input flexible structure in operation can be decomposed into the two subsystems: a base system of single degree of freedom (or of a mass for an inertial object) whose mass is in contact with the source and an appendage system consisting of a series of oscillators each of which is attached to the base mass. The driving point response is a result of the coupling between the two subsystems. (C) 2014 Elsevier Ltd. All rights reserved.

Double-objective economic statistical design of the VP T-2 control chart: Wald's identity approach

Research has shown that applying the T-2 control chart by using a variable parameters (VP) scheme yields rapid detection of out-of-control states. In this paper, the problem of economic statistical design of the VP T-2 control chart is considered as a double-objective minimization problem with the statistical objective being the adjusted average time to signal and the economic objective being expected cost per hour. We then find the Pareto-optimal designs in which the two objectives are met simultaneously by using a multi-objective genetic algorithm. Through an illustrative example, we show that relatively large benefits can be achieved by applying the VP scheme when compared with usual schemes, and in addition, the multi-objective approach provides the user with designs that are flexible and adaptive.

On Switched Regulator Design of Uncertain Nonlinear Systems Using Takagi-Sugeno Fuzzy Models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Productivity and costs of Beller-Buncher and forest processor in stands of eucalypts in first cut

The rationalization of forest harvesting and minimization costs is a constant search by the managers involved in this process, making them decide practices which are economically viable to optimize that operation. This study aimed to evaluate technically and economically the performance of feller-buncher and the forest processor in stands of eucalypts in first cut. The technique analysis included time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. Aiming the optimization the cost of forest harvesting, the system composed by feller-buncher and processor forest presented itself as a technically and economically viable alternative to harvesting eucalypt in first cut or stands that do not have bifurcated trees.

O valor da elaboração de relatórios de sustentabilidade para as empresas de mineração

Sustainability has been moving up on the business agenda in recent decades, and many methods to assess corporate sustainability have already been created. One of the most used and reliable methods is the Sustainability Reporting Guidelines of the Global Reporting Initiative (GRI). Given the importance of sustainability for society and organizations, this study examined sustainability reports published by mining companies – Alcoa, Vale and Samarco – since 2006. The objective was to verify the indicators that contribute most to the minimization of environmental impacts and the improvement of environmental performance. The methodology consisted of collecting and analyzing data from the GRI sustainability reports. It was discovered that the sustainability reports helped the companies to identify improvement opportunities and it is essential companies provide in their reports an economic, environmental and social context of their activities. Furthermore, it was found out that the indicators related to atmospheric emissions, solid waste generation, environmental protection expenditure, and the consumption of raw materials, energy and water are the ones more attached to the production process, which means they are the main contributors for the environmental performance improvement

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

O Sistema de Gestão Ambiental e sua contribuição socioambiental para a biblioteca central da UNESP, Campus Rio Claro/SP

The minimization and mitigation of environmental impacts caused by the activities of organizations is increasingly becoming a key concern due to factors such as market demand, including suppliers and consumer markets, quality standards and even marketing strategies. The implementation of an EMS - Environmental Management System - allows the organization to achieve the level of environmental performance for its determined and promotes continuous improvement over time. This system consists of a schedule of activities, so as to eliminate or minimize impacts to the environment through preventive actions. It also provides a structured approach to set and achieve goals and objectives, and to establish procedures, work instructions and control, ensuring that the implementation of the policy can become reality. The objective of this work consists in planning a system using environmental management based on the ISO 14001 - standard internationally more widespread and accepted in the requirements to establish and operate an EMS - the Central Library, UNESP, Rio Claro / SP to stimulate the quest for continuous improvement and sustainability in the educational institution. For making the diagnosis of this planning was used the PDCA methodology, suggested by the standard, as well as all requirements for compliance. The results show that the benefits that the organization will receive involve reducing expenses and cost of energy and water, and improve the organization's reputation before the whole university and other educational institutions, reaching about three thousand people on university

Uma discussão sobre a base metafórica das figuras de linguagem

The aim of this work is the analysis of some figures of speech, which is based on the existence of a nature of metaphorical process. The research starts from the hypothesis that these figures form themselves by this process. The study is based on the reading of the chapter “Figuras de linguagem”, which is in the work Lições de gramática de usos do português (NEVES, in the press), in which are given lessons about figures of speech, using literary texts and suggesting a metaphorical base for the general sustenance of the analyses. From these lessons, that had already directed groupings and analyses in Seves (2009), a reanalysis was done according to a theoretical orientation which basis is cognitivist, what contribute to this idea about the origin of the figurative processes. The bases of the theoretical orientation, in this sense, are: the conceptual metaphor theory (LAKOFF; JOHNSON, 1980), which considers metaphor as a cognitive (mental) process; and the current of the systematic metaphor (CAMERON, 2005 apud SARDINHA, 2007) that defends the attention to the recurring use of metaphor in real language, before doing assertions about the mind’s functioning. The analyses indicated these conclusions: a) the theory of the conceptual metaphor can be considered efficient for the foundation of the analyses, what implies a minimization of the metonymic component in the exam of these figures; b) and in the basis of the majority of the founded figures it is evident the nature of a metaphorical process

O ensino de história e geografia nos anos iniciais numa rede municipal de ensino: um estudo de caso

The present research aims to identify conceptions that teachers and students of the early years have in relation to the disciplines of history and geography. The site chosen for the survey was a municipal school in the city of Lençóis Paulista, in São Paulo. The work's theme was chosen after observing a minimization of the teaching of the contents of the above-mentioned disciplines at the expense of mathematical content and mother tongue. In addition, there were difficulties arising from the standardization of education , such as teaching network uses material apostilled . The survey data , together with literature review was conducted with students and teachers in the early years who participated in a semistructured interview . Authors like Callai (1999 and 2005), Cavalcanti (2005 and 1998) and Burke (1992) theoretically supports the research . They have in common a new conception of education that values the small deeds that result in major events. The student, in this view, plays an important role as a subject of social transformation. The research has favored both the analysis of the conceptions of teachers and students, assisting in reflection on teaching practices, but also led to reflect on the training of teachers. The research shows us that the type of material used and the practice adopted may impair the access of students to the language of nature and society

Um problema de corte de estoque multiobjetivo

In this paper we deal with the one-dimensional integer cutting stock problem, which consists of cutting a set of available objects in stock in order to produce ordered smaller items in such a way as to optimize a given objective function, which in this paper is composed of three different objectives: minimization of the number of objects to be cut (raw material), minimization of the number of different cutting patterns (setup time), minimization of the number of saw cycles (optimization of the saw productivity). For solving this complex problem we adopt a multiobjective approach in which we adapt, for the problem studied, a symbiotic genetic algorithm proposed in the literature. Some theoretical and computational results are presented.

Estudo sobre o gerenciamento de projeto de desenvolvimento de um veículo Baja para competições

This paper presents a study of practices in project management of a college team that participates in Baja SAE competitions. The use of management techniques can deliver benefits to the project in terms of meeting customer needs, use of time and resources and minimization of risks, for example. Should be sought methods and techniques in agreement with the project context and the team that leads it. This paper analyzes a specific case of baja vehicle project management, obtaining data by means of literature research, archival research and interviews with students on the team (structured and unstructured). The study allowed to relate the practices used by the team and to identify possible areas for improvement, based on the literature on project management. There was thus obtained a set of recommendations for the current team, in future initiatives, and to other teams responsible for carrying out similar projects

Aumento de produtividade em uma célula produtiva com processo de usinagem utilizando conceitos Lean

In the current competitive and global scenario, companies in search for solutions that become the production every time more efficient is increasing and at the same time cost reductions and cost eliminations are becoming increasingly evident and needed. In an attempt to improve production, this work aims to compare benefits obtained using principles of philosophy Lean Manufacturing in an productivity growth of a cell from an auto parts sector industry. For that purpose it will be studied the history, the concepts and the tools of philosophy Lean Manufacturing, thus using the as a business-strategic tool to accomplish goals that the company expects to get greater competitiveness and quality. The efficiency of philosophy Lean Manufacturing was already confirmed through applying the concepts in the process which has been improved inside an auto parts sector industry. At last, comparative analyzes showed benefits obtained with the use of Lean Manufacture tool called VSM, Value Stream Map, which translates the Value Stream Map of a particular family of parts as the identification, minimization and elimination of waste identified

Aperfeiçoamento do método clause-column table para a geração eficiente de implicantes primos

Pós-graduação em Engenharia Elétrica - FEIS

Reconfiguração de sistemas de distribuição operando em vários níveis de demanda através de uma meta-heurística de busca em vizinhança variável

Pós-graduação em Engenharia Elétrica - FEIS

Análise do método suvrel na expressão diferencial a partir da matriz de contagens gerada com dados de RNA-SEQ

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)