Sensitivity of cotton cultivars to soil compaction

Cotton is one of the most sensitive crops to soil compaction, but there may be genetic variability for this trait. The objective of this study was to evaluate cotton cultivars sensitivity to soil compaction. Soil columns were built with three pvc rings with internal diameter of 10 cm and filled with an alfisol. The heights of the top and bottom rings were 15 cm, and the intermediate ring, in which the soil was compacted, was 3.5 cm high. The levels of compression used in the subsurface were characterized by penetration resistances of 0.41, 0.93, 1.41 and 1.92 MPa. The cultivars 701 FMT, FMT 705, FMT 707, FMX 951 LL and FMX 966 LL were grown up to 23 days after plant emergence, when the dry matter of shoots and roots, root length density and root diameter were determined. The cotton cultivars have variability in their sensitivity to resistance to penetration. The cultivar 707 FMT is more sensitive to soil compaction, while the FMT 701 is more tolerant. Penetration resistance of around 0.92 to 1.06 MPa reduce 50% cotton root growth, but resistance to penetration of 1.92 MPa did not totally prevent growth.

Influência da compactação do solo em subsuperfície sobre o crescimento aéreo e radicular de plantas de adubação verde de inverno

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cana-de-açúcar: respostas da planta e do solo a diferentes níveis de irrigação no semiárido nordestino

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Avaliação de desempenho do dispositivo de medida de resistividade elétrica em laboratório

Pós-graduação em Engenharia Civil e Ambiental - FEB

Avaliação de uma nova composição de agente clareador sobre a microdureza do esmalte: associação do trimetafosfato de sódio e fluoreto de sódio ao peróxido de hidrogênio a 10%

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

A possible way for increasing the cutting tool life can be achieved by heating the workpiece in order to diminish the shear stress of material and thus decrease the machining forces. In this study, quartz electrical resistances were set around the workpiece for heating it during the turning. In the tests, heat-resistant austenitic alloy steel was used, hardenable by precipitation, mainly used in combustion engine exhaustion valves, among other special applications for industry. The results showed that in the hot machining the cutting tool life can be increased by 340% for the highest cutting speed tested and had a reduction of 205% on workpiece surface roughness, accompanied by a force decrease in relation to conventional turning. In addition, the chips formed in hot turning exhibited a stronger tendency to continuous chip formation indicating less energy spent in material removal process. Microhardness tests performed in the workpieces subsurface layers at 5 m depth revealed slightly higher values in the hot machining than in conventional, showing a tendency toward the formation of compressive residual stress into plastically deformed layer. The hot turning also showed better performance than machining using cutting fluid. Since it is possible to avoid the use of cutting fluid, this machining method can be considered better for the environment and for the human health.

Mechanisms of action of fluoridated acidic liquid dentifrices against dental caries

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contaminação das águas subterrâneas por resíduos de postos de combustíveis: uma abordagem no município de Rio Claro

The contamination of underground waters is a subject of great importance, since a lot of people use this kind of source for public supply. This paperwork manages with how gas stations can contaminate these waters and what are some remediation techniques, used nowadays to solve this problem. The contamination caused by the gas stations can have its origin in the underground storage tanks when they suffer corrosion and show leaking problems. It’s a topic of great relevance, because the hydrocarbons derivated from petroleum present in the fuels can stay for a long time in the environment. Besides that, an analyses of the risk of contamination by gas stations in the city of Rio Claro was made based on three parameters: density of the gas stations, depth of the underground water and hydraulic conductivity. To achieve such goal, maps were elaborated considering those parameters individually and considering the three of them together. Analyzing those maps, it was concluded see that the spots that represent the biggest risks of contamination in Rio Claro are located southeast and center-west.

Radônio como indicador de contaminação de solos por hidrocarbonetos

Previous studies show that in areas contaminated by fuel spill (NAPL- non-aqueous phase liquids), from operational activities, transport and storage, it was possible to observe a significant decrease of ²²²Rn (radon) gas concentration in the soil, even a non-uniform distribution of this gas in top soil, even with a geological situation was practically homogeneous. These anomalies may be associated with the preference partitioning of radon in NAPLs. This work consists of applying ²²²Rn as an indicator for locating subsurface contamination by NAPLs in an area of the city of Rio Claro (SP) where, according to the “Survey of Contaminated and Rehabilitated Areas in the State of São Paulo (Environmental Sanitation and Technology Company - CETESB), there was, in the year 2007, groundwater contamination from leaks of liquid fuels. The challenges of this research are: Promulgate the use of a new tool with greater efficiency in obtaining results, in addition to generate less impact in half and have less expenditure; disseminate scientific culture promoting greater integration of C&T (culture & technology) between universities and businesses. The emanometric technique to estimate the location, number and interfacial area of NAPL in saturated and non-saturated zone, has the advantage of locating and determining plumes of free phase even when the amount of VOC's (Volatile Organic Compounds) that reaches the surface is low or non-existent. In addition, the measurement techniques ²²²Rn are quite developed. The results obtained show that, similar to the other studies, the 222Rn soil gas presents an anomalous behavior in the area bounded by NAPL plume, being possible to note a significant deficit in the concentration of the gas in spots where the saturation by NAPLs is still critical. Therefore it is concluded that this tool is really promising, but we must be careful to evaluate the initial conditions of the area, as well as the type of...

Estudo da influência do lineamento Tibagi e Sinclinal de Torres na estruturação da porção norte da bacia de Pelotas

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Caracterização estrutural da porção central da Bacia de Santos e seu embasamento continental adjacente, através de interpretação de imagens de satélites e geofísicas

The Santos Basin is located in the Brazilian continental margin and includes the coast of Santa Catarina, Paraná, São Paulo and Rio de Janeiro states. Its northern limit is the Campos Basin through the High of Cabo Frio and the southern one with the Pelotas Basin through the Platform of Florianópolis, totaling an area of approximately 350,000 square kilometers in a water depth of 3,000 m. The Paranapanema Lineament has WNW / ESE direction, and extends from the area filled by the Paraná Basin, on the border between the states of Sao Paulo and Parana, lasting up to near the ocean floor along with the fracture zone of Rio de Janeiro. The Capricorn Lineament is a feature inherited from the separation between the continents of Africa and South America, and is the main structural feature NW / SE of the Santos Basin center-south region. These two structures together with other ones with continental origin may be associated with structural features in the sediments from the Santos Basin. This work aims to characterize the structures operating in the central portion of the Santos Basin based on subsurface data in the offshore area (2D seismic) together with data from the surface of the continental basement in a way to correlate the Santos Basin structures with the continental regional traits. This data interpolation showed that the structural features of the continent operates on the submerged zone, the seismic sections show these structural trends for the Paranapanema Lineament / Fracture Zone of Rio de Janeiro, Capricorn Lineament and two fault zones that exhibit structures typical of a transfer zone

Caracterização hidroquímica do sistema aquífero Tubarão no município de Americana/SP

The growing interest in the use of groundwater resources is directly related to the economic advantages that the groundwater exploitation offers when compared to surface waters. This happens especially in large urban centers, such as the city of Americana / SP, where the rivers are increasingly contaminated by household and industrial waste. Therefore, this study aimed to characterize the Tubarão Aquifer System, in the city of Americana, to identify and evaluate the spatial distribution of different hydrogeochemical facies as well as understand the rock-fluid interaction through the construction of a conceptual hydrogeochemical model. This study was made based on the recognition of the possible chemical reactions that print the chemical characteristics of groundwater in the area. To do the job, there were two water sampling campaigns of all deep wells used by the City of Americana public water supply. From the results of hydrochemical, classification of water was made by Piper and Stiff diagrams as well as geostatistical data using cluster analysis of principal components. Based on information from the profiles obtained from the survey SIAGAS as well as in geological profiles provided by the city of Americana, we sought to detail the subsurface geology of the Subgroup Itararé in the city of Americana. The results obtained allowed the identification of three hydrochemical types in the study area: Bicarbonated calcium-sodium (1), bicarbonate sodium (2) and sodium chloride (3). The waters have bicarbonate alkaline pH to alkaline and can be considered weakly saline, with electrical conductivity values of around 161 mS / cm. Samples classified as sodium bicarbonate average of 174.99 mS / cm. The pH values ranging from 6.74 to 7.99, averaging 7.52. For the group of waters classified as sodium chloride, conductivity average is 164.32 mS / cm and pH values ranging... (Complete abstract click electronic access below)

Geologia do platô N6 - província mineral de Carajás (SP)

The N6 Plateau presents an iron-ore occurence in Carajás Mineral Province, standing near to actually operating deposits. Geological mapping in 1:10,000 scale and integration of geochemical, geophysical, petrography and drilling turns possible interpretation of his geological evolution. The mapped area has lithotypes from Archean Grão Pará Group, comprising very lowgrade metamorphic basic rocks and iron formation and an Proterozoic sedimentary association of conglomeratic sandstones called as Caninana Unity. The structural geology in given by a regional scale homoclinal, where the Grão Pará Group strata dips towards SW, as a part of the Northern Limb of the Carajás Fold. Subsequent deformation associated to the installation of the Carajás Shear Zone presents as E-W fold axis. Geochemical evidence permits to consider de Parauapebas Formation as the rocks which has been hydrothermally-altered to outsourcing fluids responsible to deposition of iron formations in the oceanic system, including different signatures which can be interpreted as possible sub-embayments in the Carajás Basin. The iron ore in the area occurs in subsurface as very fine friable hematite generated by supergenous enrichment of the iron formation. The conceived geologic model differs from the current academic proposal on the fact that hydrothermal alteration has been involved on the jaspelite enrichment. Metamorphism on the Parauapebas Formation presents paragenesis considered as ocean-floor metamorphism which precedes de deformation insofar as the rocks show no tectonic fabric referring to shallow crust evolution. Geophysical methods such as magnetometry and gravimetry presents excellent results for structural interpretation in uneven exposed terrain

Grãos em carbonatos marinhos cretácicos da Bacia Potiguar: formações Ponta do Mel e Jandaíra

This work aims to identify and photograph grains that compose important Cretaceous carbonate units of the Potiguar Basin, represented by the Ponta do Mel and Jandaíra formations (Albian-Campanian). Petrographic investigation of thin sections was essential. The samples studied come from wells and surface samples from the collection UNESPetro – UNESP, Rio Claro. In the Ponta do Mel Formation, the grains consist of ooids, oncoids, peloids and bioclasts. Regarding to the identified bioclasts, the solenoporacean red algae, mollusks (bivalves and gastropods), echinoids, foraminifera, ostracods and worms were the dominant elements. In the Jandaíra Formation, the grains are composed by ooids, peloids and bioclasts, which are represented by green algae, mollusks (bivalves and gastropods), benthic foraminifera miliolids, worms, echinoderms and ostracods. The grains found in the Ponta do Mel Formation are somewhat similar to those found in the Jandaíra Formation, with the exception of calcareous algae. The subsurface material from the Ponta do Mel Formation is derived from the upper part of the unit, representing marine high-energy carbonates, which also contains ooids and Trocholina. The samples of Jandaíra Formation, collected in outcrops, often contain green algae, mollusks and miliolids, and come from inner shelf and lagoon facies previously described

Estudo geoelétrico em ocorrência de manganês supergênico no município de Itapira (SP) por meio do método da eletrorresistividade

The geophysical methods are used as tools that, together with other data, assist in target detail and sizing of ore bodies. This paper presents the results of the application of DC resistivity geophysical method on a manganese mineral occurrence located in Itapira, in the northern portion of São Paulo state, hosted predominantly in schists and quartzits of Itapira Group. The integration of geophysical data resulted in the elaboration of electrical resistivity models, where it was possible observe that the mineralized body, composed predominantly of manganese oxides and hydroxides, has a pattern of high resistivity (above 5000 Ω.m) both surface and subsurface. The contrast with the host rock is characterized mainly by different minerals assemblages and by the presence of local groundwater. The results accomplished in this paper reveal that the application of DC resistivity method is valid in primary evaluations of supergene deposits