Purification and characterization of beta-fructosidase with inulinase activity from Aspergillus niger-245

Aspergillus niger - 245 a strain isolated from soil samples showed good beta -fructosidase activity when inoculated in medium formulated with dahlia extract tubers. The enzyme was purified by precipitation in ammonium sulphate and percolated in DEAE-Sephadex A-50 and CM-cellulose columns, witch showed a single peack in all the purification steps, maintaining the I/S ratio between 0.32 to, 0.39. Optimum pH for inulinase activity (I) was between 4.0 - 4.5 and for invertase activity (S) between 2.5 and 50. The optimum temperature was 60 degrees .C for both activities and no loss in activity was observed when it was maintained at this temperature for 30 min. The K-m value was 1.44 and 5.0 respectively, for I and S and V-m value 10.48 and 30.55 respectively. The I activity was strongly inhibited by Hg2+ and Ag+ and 2 x 10(-3) M of glucose, but not by fructose at the same concentration. The enzyme showed an exo-action mechanism acting on the inulin of different origins. In assay conditions total hydrolysis of all the frutans was obtained although it has shown larger activity on the chicory inulin than that one from artichoke Jerusalem and dahlia, in the first 30 min. The obtained results suggested that the enzyme presented good potential for industrial application in the preparing the fructose syrups.

Temperature dependence of fractal dimension of grain boundary region in SnO2 based ceramics

Fractal dimensions of grain boundary region in doped SnO2 ceramics were determined based on previously derived fractal model. This model considers fractal dimension as a measure of homogeneity of distribution of charge carriers. Application of the derived fractal model enables calculation of fractal dimension using results of impedance spectroscopy. The model was verified by experimentally determined temperature dependence of the fractal dimension of SnO2 ceramics. Obtained results confirm that the non-Debye response of the grain boundary region is connected with distribution of defects and consequently with a homogeneity of a distribution of the charge carriers. Also, it was found that C-T-1 function has maximum at temperature at which the change in dominant type of defects takes place. This effect could be considered as a third-order transition.

Reagentless biosensor for isocitrate using one step modified Pt-Ir microelectrode

The Pt-Ir microelectrode modified through one step, electropolymerization is proposed for the isocitrate amperometric biosensor construction. The enzyme (isocitrate dehydrogenase-ICDH), coenzyme (NADP(+)) and mediator (Meldola's Blue) were immobilized onto the microelectrode surface in one step from a PIPES buffer solution containing pyrrole. The optimized experimental conditions were 25 cycles of cyclic voltammetric in a solution containing 3.58 10(-5) mol l(-1) of mediator, 3.51 10(-4) mol l(-1) of coenzyme and 2.68 U ml(-1) of enzyme. In contrast to the biosensor for isocitrate reported in literature, just one enzyme was immobilized and no coenzyme addition in the solution of analysis was necessary. Catalytic currents were proportional to the isocitrate concentration between 7.7 10(-6) and 1.04 10(-4) mol l(-1), showing good repeatability. The detection limit of the proposed biosensor was 3.50 10(-6) mol l(-1), the response time was lower than 20 s, the lifetime was about 30 determinations and no significant interference of sugars and citric acid was verified. Orange juice samples were analysed by both methodology biosensor and spectrophotometric commercial kit, and the obtained results presented a good correlation. The data demonstrated that the developed biosensor is suitable for isocitrate determination in orange juice without matrix interferences. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Effect of thickness on the electrical and optical properties of Sb doped SnO2 (ATO) thin films

This work reports the preparation and characterization of (SnO2) thin films doped with 7 mol% Sb2O3. The films were prepared by the polymeric precursor method, and deposited by spin-coating, all of them were deposited on amorphous silica substrate. Then, we have studied the thickness effect on the microstrutural, optical and electric properties of these samples. The microstructural characterization was carried out by X-ray diffraction (XRD) and scanning tunneling microscopy (STM). The electrical resistivity measurements were obtained by the van der Pauw four-probe method. UV-visible spectroscopy and ellipsometry were carried out for the optical characterization. The films present nanometric grains in the order of 13 nm, and low roughness. The electrical resistivity decreased with the increase of the film thickness and the smallest measured value was 6.5 x 10(-3) Omega cm for the 988 nm thick film. The samples displayed a high transmittance value of 80% in the visible region. The obtained results show that the polymeric precursor method is effective for the TCOs manufacturing.

Non-Linear Dielectric Properties of PLMN-PT Relaxor Ferroelectrics

Recent investigations on the non-linear (NL) dielectric properties of relaxor ferroelectrics systems, not only as ceramic bodies, but also, in thin films, have showed a significant technological and scientific interest. The most common practical applications of relaxors include multilayer capacitors and actuators. In this work, non-linear dielectric properties of hot-pressed (1-x)[Pb1 -(3/2) yLayMg1/3Nb2/3O3]-xPbTiO3 (PLMN-PT) ferroelectric ceramics were investigated. The NL properties were obtained by using the measurements of the dielectric permittivity of the material as a function of the AC electric field with variable amplitude in the frequency and temperature range of 100 Hz-1 MHz and 50-450 K, respectively. An anomalous behavior of the non-linear dielectric response was observed when submitted to high electric fields levels. The obtained results were analyzed concerning one of the models for the dielectric response of relaxors ferroelectrics materials currently discussed in the literature.

Periosteum-Derived Cells as an Alternative to Bone Marrow Cells for Bone Tissue Engineering Around Dental Implants. A Histomorphometric Study in Beagle Dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic diversity of Stryphnodendron adstringens (Mart.) Coville determined by AFLP molecular markers

Bark extracts of Stryphnodendron adstringens (Mart) Coville a Leguminosae species, well known in Brazil as barbatimao, are popularly used as healing agent. The objective of this work was to determine the genetic diversity of S. adstringens populations and to correlate genetic distances to the production of tannins. S. adstringens accessions from populations found in Cerrado regions in the states of Goias, Minas Gerais and São Paulo were analyzed using the AFLP (Amplified Fragment Length Polymorphism) technique. A total of 236 polymorphic bands were scored and higher proportion of genetic diversity was found inter populations (70.9%), rather than intra populations (29.1%). F-ST value was found to be significantly greater than zero (0.2906), demonstrating the complex genetic structure of S. adstringens populations. Accessions collected in Cristalina, GO, showed higher percentage of polymorphic loci (87.3%) and the highest genetic diversity. The lowest genetic variability was detected among accessions from the population growing in Caldas Novas, GO. The genetic distance among populations was estimated using the Unweighted Pair Group Method with Arithmetic Mean (UPGMA), which grouped populations into 3 clusters. Moreover, chemotypes with tannin concentration above 40% showed higher genetic similarity. AFLP analysis proved to be an efficient gene mapping technique to determine the genetic diversity among remaining populations of S. adstringens. Obtained results may be employed to implement further strategies for the conservation of this medicinal plant. (C) 2011 Elsevier Ltd. All rights reserved.

Digestibilidade Aparente e Efeito Macro-Microscópico em Tilápia do Nilo (Oreochromis niloticus) Arraçoadas com Torta de Dendê

To evaluate the nutritional value of palm kernel meal on the performance Nile tilapia (Oreochromis niloticus), five isonitrogenous (30% crude protein), isoenergetic (2800 kcal/kg of digestible energy), and isofibrous (10% crude fiber) diets, with increasing levels of palm kernel meal (0, 7, 14, 21, 28 and 35%). were ad libitum fed to fingerlings with initial body weight of 1.52g +/- 0.04, housed per 120 days in 35 aquarium of 60 liters with fingerlings each. The environmental culture condition were monitored during all experimental period. Statistical analyses of recorded data were performed through polynomial regression models. To determine the apparent digestibility, macroscopic analysis of viscera and microscopic analysis of intestine epithelium were performed. The obtained results indicated that the inclusion of palm kernel meal up to 35% Nile tilapia diets did not affects the apparent digestibility and did not induce any pathological effects on viscera and intestinal epithelium.

Application of pi Circuits for Simulation of Corona Effect in Transmission Lines

In this article, it is represented by state variables phase a transmission line which parameters are considered frequency independently and frequency dependent. Based on previous analyses, it is used the reasonable number of p circuits and the number of blocks composed by parallel resistor and inductor for reduction of numerical oscillations. It is analyzed the influence of the increase of the RL parallel blocks in the obtained results. The RL parallel blocks are used for inclusion of the frequency influence in the transmission line longitudinal parameter. It is a simple model that is been used by undergraduate students for simulation of traveling wave phenomena in transmission lines. Considering the model without frequency influence, it is included a representation of the corona effect. Some simulations are carried considering the corona effect and they are compared to the results without this phenomenon.

Detection of cross infections by Leishmania spp. and Trypanosoma spp. in dogs using indirect immunoenzyme assay, indirect fluorescent antibody test and polymerase chain reaction

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito das condições climáticas do semiárido sobre o comportamento fisiológico de caprinos mestiços f1 saanen x boer

This research aimed at evaluating the effect of the semiarid climatic conditions on the physiological behavior of F1 Saanen x Boer crossbred goats, created at an intensive system. The experiment was carried out in the Health and Rural Technology Center, in the Federal University of Campina Grande, in the town of Patos, Paraiba. Twenty-four animals were used, with ages varying between three and four months, being 12 females and 12 males, weaned and prevented against worms, receiving ad libitum water and controlled concentrate and roughage. The environmental variables were checked inside and outside the experiment place, as well as the physiological variables of all animals. Except for the humid bulb temperature, the variance analysis revealed shift effect (P<0.05) for all environmental variables. There was merely shift effect (P<0.05) for Cardiac Frequency and Rectal Temperature, and the averages of both, in the afternoon, overcame those observed in the morning. The obtained results based on the studied physiological and environmental variables conclude that crossbred goats, resulting of Boer (paternal) and Saanen (maternal), present a good resistance to heat, permitting their indication for the meat production in confinement on semiarid conditions.

Determination of Total Sulfur in Agricultural Samples by High-Resolution Continuum Source Flame Molecular Absorption Spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

2-methoxybenzylidenepyruvate with heavier trivalent lanthanides and yttrium(III) - Synthesis and characterization

Solid-state Ln(2-MeO-BP) compounds, where Ln stands for trivalent Eu to Lu and Y(III) and 2-MeO-BP (which is 2-methoxybenzylidenepyruvate) have been synthesized. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffraction, infrared spectroscopy and other methods of analysis were used to characterize and to study these compounds. on the base of the obtained results an Ln(2MeO-BP)(3)center dot H2O general formula can be established.

Caracteristicas de padroes de drenagem de areas com entalhes erosivos no municipio de Botucatu - SP

Descriptive and quantitative characteristics of the drainage pattern of two places very susceptible to erosive process, located in the municipality of Botucatu-SP, were studied through photo-interpretative methods. The analysis and discussion of the obtained results led to the conclusion that the geologic control in the area B, masking the effect of the relief and terrain permeability, increases the drainage density, the length of channels and the angularity of the channels of 3rd and 4th order. -from English summary

Tratamento endurecedor para cones de guta-percha.

The subject of this work was to study a hardening procedure for gutta-percha points, in order to make ease their introduction in very curved root canals. Gutta-percha points of different brands and dimensions were submitted to treatment with alcohol 96 degrees for 1 to 3 days. After this treatment the weight necessary to make a bending of 35 degrees on the tip of the gutta-percha was evaluated. The obtained results were submitted to statistic analysis and the following conclusions can be observed: a. The treatment with alcohol make hard the gutta-percha points in a significant level. b. There was not significant differences between the results obtained with more than one day of alcohol treatment. c. The treatment with alcohol do not make hard all the brands of gutta-percha points.