Distribution of constitutive heterochromatin in Triatoma melanocephala (Hemiptera, Triatominae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transição para um novo centro de distribuição logístico em uma indústria de confecção

In a highly competitive environment for manufacturers and retailers in the garment sector, flexible solutions for warehousing, distribution and exhibition of products directly influence the cost and responsiveness to market demands. This work refers to a Textile/Clothing, which undergoes a process of restructuring and growth, where we evaluated the need for professionalism in all its processes, so that the high demands were met in a sales perennial. Thus, this study aims to identify and analyze possible improvements in the process of transition from a logistics/manufacturing force in a Textile/Clothing in existence since 1998, located in São Paulo, a framework for a new logistics Center Distribution Logistics. The theoretical basis of the research literature addresses as Distribution Center and its basic functions, layout and performance indicators. As result it was mapped the current logistics processes, contributing directly to the development of the layout of the new Distribution Center. Have also been established KPI,s ( Key Performance Indicator) and Logistics Performance Indicators showing the actual process performance, helping professionals in make decisions

Incorporação do lodo da estação de tratamento de água (ETA II) do município de Rio Claro-SP, na argila, para produção de cerâmica vermelha

The slugde from decanters in Water Treatment Plants (WTP) has different composition varying, according to the region, coagulant type and dosages, the plant layout. In this work, the physical characterization of the sludge generated from decenties (ETAII the municipality of Rio Claro, Brazil), the manufacture of bodies of evidence-sludge mixture of clay (with humidity of 8% and concentrations of sludge, 5, 15 and 30%) the testing technology after burning the mixture to a temperature of 950 ° C were investigated. The main aim assess the possibility of its use as raw material in the ceramic red production. For comparison of the obtained results it was used values of the testing technology of bodies of evidence only with clay, prepared under the same conditions. In general, the addition of sludge from ETA made worse the properties of the ceramic body, however, the values obtained from the tests on the concentration of 5% of sludge, still remain within the acceptable limits for the production of red pottery pieces.

Melhorias dos processos no setor de expedição em uma transportadora de cargas fracionadas

The transport market has forced organizations reduce the cost of services and processes, resulting from the highly competitive and, for such waste at all levels and processes are a focus of study for its elimination. This study refers to carrier fractional loads, located in the municipality of Itapecerica da Serra Layout and headquartered in São Paulo, which requires a rapid development throughout its structure, because its expansion was not accompanied by an evolution of effective processes. The need to increase efficiency in delivery with a reduced cost of transport forced the company to hire a logistics consulting to help identify potential bottlenecks in processes, suggest improvements with greater impact and implementation at the end of a critical analysis of results. This work focuses on the Layout of the warehouse shipping area of this organization and we used the method of action research to the consultant and involved could reach this conclusion collaboratively, as well as interviews with those involved in the process and also visual observation. Tools such as Key Performance Indicator, Mapping Workflow, Analytic Hierarchy Process, Applied Statistics and Standard Operating Procedure were used to assist in the identification, analysis and implementation of the proposed improvements

Arranjo fisico na montagem com fluxo continuo nas superficies de comando composto

Based on the fierce competitiveness of manufacturing companies and the planning problems arising from the lack of flexibility and forecasting demand, companies are increasingly looking to reflect on the most appropriate methods to manage its manufacture. Today it is possible to obtain higher gains and lower costs through very efficient tools, this paper uses action-research to model and implement the physical layout of a manufacturing cell, with strong theoretical basement returned to Lean Production System and acting systematically in flexibility in mounting. Through observation and joint action of the observer and staff can report problems that occurred during the phases of planning and implementation of improvements. With the improvement of the physical arrangement in the assembly was possible to obtain significant gains by reducing the production cycle, the manpower required, spending of non-compliance and increasing productivity, final product quality and health in the workplace

Análise de processos de uma empresa de comércio exterior para viabilizar maior produtividade

The easy access to information has been accelerating even more business competitiveness nowadays. To turn a foreign trade company into a more competitive company by improving its services, this work aims the analysis of the Supply Chain processes to enable greater productivity. Using powerful tools of great historical success in the business world – such as Flowcharts, VSM Lean and PDCA –, a structure was created that adapted its main concepts and produced a method which enabled not only improvements on modified processes but also on the subsequent ones. Productivity data were collected, where evidence of quantitative improvements were found in the expedition macro process. Due to a process analysis theme, this paper gives also the thought about process approach, vital step to create a future Quality Management System

Ferramentas do Lean Manufacturing aplicadas em uma indústria de luminária

Due to globalization, is increasingly common for companies to make their products more competitive. With this background, the industries seek more efficient ways to produce. This paper aims to examine the tools of Lean Manufacturing applied in an industry luminaries ,addressing the positive aspects. Were applied tools like value stream mapping, Kanban, setup reduction and 5S program. With the application of these tools obtained improvements in processes, reducing lead time from factory and reducing the cost of the luminaries

Identificação e implementação de melhorias nas operações de transporte interno de matéria-prima de um aindústria de bens de consumo

The world is an environment in constant process of globalization, where physical boundaries are no longer limits. The competitiveness has also evolved, forcing companies to adopt efficient practices in order to increase productivity gains, reduce losses and improve quality. Nowadays, the supply chain management and its element, including the internal logistics, is regarded as a key element for gaining competitiveness. Thus, this study focused on identifying and implementing improvements in the internal raw materials transport operations of a consumer goods company, based on concepts and tools of the lean thinking. The results showed considerable gains in productivity with consequent cost reduction, proving the efficiency of the methodology lean even in support areas of an organization.

Projeto de uma rede de ar comprimido industrial

In this study was shown the historical uses of compressed air by humanity, the general scenario of its uses and the most important steps of a project to set up an industrial network of compressed air, from the selection of a suitable compressor to the design of a distribution network, discussing all the possibilities and their characteristics as well as the feasibility of them. A case study was conducted in a food company where was implemented an industrial compressed air network. Information was collected regarding the consumers points of compressed air, as well as the layout of the new facility, necessary for the development of the distribution system. Two methods were used, analytical and nomogram, which complemented each other to the definition of appropriated tubing, both financially and physically

Estudo de capacidade de armazenagem e frota em uma empresadoramo de bebidas

This paper presents a case study in a largebeverage company,which suffers fromlack of inputs. Through 5 Whys analysis,it was possible to find the root causes of the problem: the bad fleet sizing deliveriesand low capacityof storage of inputs. Through the use of simulation, it was possible to determine theactual fleet required, and it was alsoquantified thespace required for thestorage ofloads.Based on these results andconsidering the cost, it waspossible todetermine which the most effective solutions toreducing the initialproblem: the increase of storage capacity, considered the best option, even demanding time, or the increase of the fleet, considered a stopgap measure to partially solve the problem until the first solution is finalized

Gestão de gastos imprevistos no abastecimento de matéria-prima de uma fábrica

La performance desentreprises ça dépend, engrande partie, deses chaînesd’approvisionnement. Celas peuvent entretrès complexe, car elle implique tout le processus avant, pendant et après l’assemblage duproduit fini. Ce travaila donc comme objectifl’amélioration de lagestion des imprévus qu’arrivent audébutdela chaîne d’approvisionnement et lesimpacts sur l’approvisionnement de la ligne d’assemblage d’une usine. L’approche méthodologique utilisée est la recherche-action. De cette façon, ce travail présente une standardisation des processusquechaque département doit fairedans uncas de rupture dans la chaîne. D’après entretiens, analyses de document, standardisation des organigrammes et graphiques croisés dynamiques, ila été possible proposer un moyen plus critique d’analyser et résoudre certains problèmes. En tant que résultats, viennent un organigramme défini, une divulgation des informations plus précises pour la prise en décision et unes l’analyse critique de l’historique des imprévus. Il s’agit d’un ensemble des processus meilleur pour une bonne prise en décision de court, moyen et long terme pour les dépenses avec des imprévus dans l’approvisionnement de matière-première de l’usine

Sistema de recomendação de produtos online baseado em palavras-chave

This project aims to explore the many methods used for the development of recommendation systems to user ’ s items and apply the content - based recommendation method on a prototype system whose purpose is to recommend books to users. This paper exposes the most popular methods for creating systems capable of providing items (products) according to user preferences, such as collaborat ive filtering and content - based. It also point different techniques that can be applied to calculate the similarity between two entities, for items or users, as the Pearson ’s method, calculating the cosine of vectors and more recently, a proposal to use a Bayesian system under a Dirichlet distribution. In addition, this work has the purpose to go through various points on the design of an online application, or a website, dealing not only oriented algorithms issues, but also the definition of development to ols and techniques to improve the user’s experience. The tools used for the development of the page are listed, and a topic about web design is also discussed in order to emphasize the importance of the layout of the application. At the end, some examples of recommender systems are presented for curiosity , learning and research purposes

Proposta de um procedimento de trabalho para gerenciamento de estoque em uma instituição pública de ensino superior

This paper aims to discuss the system of inventory management in a public university. The present paper shows the definitions, classification of materials and the advantages and disadvantages of storage, besides exposing the public procurement bidding system since the acquisition until receipt of materials to be stored. This paper presents a survey of the items stored in the warehouse and use of control tools such as ABC curve to demand flow prized for verification of critical items and idle items. Displays also a calculation for the minimum value of stock and replacement of an item in inventory and an analysis of the conditions of the warehouse layout. As a result, knowledge is acquired and a revised system of inventory management of the institution was proposed

Fases de investigação geológico-geotécnica para a implantação de dutovias

The research addresses the need for detailed geological and geotechnical investigations in pipeline’s design, given the diversity of geological units crossed by these works along its layout, which often extends for hundreds of miles. For its large size, this type of work often goes through different states and regions with very different characteristics in terms of topography, vegetation, geology and geotechnical conditions. For a better use of these investigations in order to avoid unnecessary costs and inefficient results, some authors recommend that steps be taken to study, seeking a progressive detail of the pipeline’s implantation area. The main objective of the study is to describe, analyze and correlate the proposals for geological and geotechnical’s investigation recommended by the authors selected. Nogueira Junior & Marques (1998) suggest that for better effectiveness of geological and geotechnical investigations associated with the deployment of pipelines, different research methods are applied sequentially in five major stages of the building. Rocha et al (2008) recommend that, for the pipeline’s implantation using horizontal directional drilling, investigations are performed in three phases of study, to be developed in coordination with the project stages. For Gelinas & Mathy (2004), when time and budget constraints permit, geotechnical investigations for directional drilling projects for pipelines must be made in four sequential phases. Heinz (2008) suggests that the geotechnical investigations for pipeline’s implantation using horizontal directional drilling at crossings of water bodies are carried out in three successive stages. By the development of research, we could see that all the different proposals recommend studies in sequential phases, starting from a more general scale for a more specific, seeking a progressive understanding of the geological model of the area where you intend to deploy the pipeline