Desvelando a família homoparental: um estudo sobre os relatos de casais homossexuais com filhos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the Electrochemical Deposition and Dissolution of Divalent Metal Ions

The deposition of Cu2+ and Zn2+ from aqueous solution has been investigated by a combination of classical molecular dynamics, density functional theory, and a theory developed by the authors. For both cases, the reaction proceeds through two one-electron steps. The monovalent ions can get close to the electrode surface without losing hydration energy, while the divalent ions, which have a stronger solvation sheath, cannot. The 4s orbital of Cu interacts strongly with the sp band and more weakly with the d band of the copper surface, while the Zn4s orbital couples only to the sp band of Zn. At the equilibrium potential for the overall reaction, the energy of the intermediate Cu+ ion is only a little higher than that of the divalent ion, so that the first electron transfer can occur in an outer-sphere mode. In contrast, the energy of the Zn+ ion lies too high for a simple outer-sphere reaction to be favorable; in accord with experimental data this suggests that this step is affected by anions.

Efficacy of sperm motility after processing and incubation to predict pregnancy after intrauterine insemination in normospermic individuals

Background: Intrauterine insemination (IUI) is widely used to treat infertility, and its adequate indication is important to obtain good pregnancy rates. To assess which couples could benefit from IUI, this study aimed to evaluate whether sperm motility using a discontinuous gradient of different densities and incubation in CO2 in normospermic individuals is able to predict pregnancy.Methods: A total of 175 couples underwent 175 IUI cycles. The inclusion criteria for women were as follows: 35 years old or younger (age range: from 27 to 35 years) with normal fallopian tubes; endometriosis grades I-II; unexplained infertility; nonhyperandrogenic ovulatory dysfunction. Men with normal seminal parameters were also included. All patients underwent ovarian stimulation with clomiphene citrate and human hMG or r-FSH. When one or (at most) three follicles measuring 18 to 20 mm were observed, hCG (5000 UI) or r-hCG (250 mcg) was administered and IUI performed 36-40 h after hCG. Sperm processing was performed using a discontinuous concentration gradient. A 20 microliters aliquot was incubated for 24 h at 37 degrees C in 5% CO2 following a total progressive motility analysis. The Mann-Whitney and Chi-square tests, as well as a ROC curve were used to determine the cutoff value for motility.Results: Of the 175 couples, 52 (in 52 IUI cycles) achieved clinical pregnancies (CP rate per cycle: 29.7%). The analysis of age, duration and causes of infertility did not indicate any statistical significance between pregnancy and no pregnancy groups, similar to the results for total sperm count and morphology analyses, excluding progressive motility (p < 0.0001). The comparison of progressive motility after processing and 24 h after incubation between these two groups indicated that progressive motility 24 h after incubation was higher in the pregnancy group. The analysis of the progressive motility of the pregnancy group after processing and 24 h after incubation has not shown any motility difference at 24 h after incubation; additionally, in couples who did not obtain pregnancy, there was a statistically significant decrease in progressive motility 24 h after incubation (p < 0.0001). The ROC curve analysis generated a cutoff value of 56.5% for progressive motility at 24 h after incubation and this cutoff value produced 96.1% sensitivity, 92.7% specificity, 84.7% positive predictive value and 98.3% negative predictive value.Conclusions: We concluded that the sperm motility of normospermic individuals 24 h after incubation at 37 degrees C in 5% CO2, with a cutoff value of 56.5%, is predictive of IUI success.

Divergência genética de genótipos de feijoeiro a infestação de Zabrotes subfasciatus (Bohemann) (Coleoptera: Bruchidae)

The aim of this work was to evaluate the genetics divergence of bean genotypes in relation to the oviposition, feeding and development of Zabrotes subfasciatus, determining the degrees of resistance to the weevil. The genotypes used were: IAC Carioca-Tybata, IAC Fortaleza, IAPAR 81, IAC Carioca-Ete, IAC Galante, IAC Harmonia, IAC Una, IAC Diplomata, BRS Supremo and RAZ 49. Tests were performed in laboratory under controlled humidity, temperature and photophase conditions. In free choice test, 10 g of bean genotypes seeds were distributed in circular openings placed equidistant from each other in aluminum trays, where 70 couples were released. The attractiveness was evaluated 24 hours and seven days after the experiment started, and then the number of eggs was evaluated. In non choice test, 10 g of seeds were used where seven couples of Z. subfasciatus, 24 hours-old, were released, remaining seven days, and after the adults retreat, the total number of eggs, viable and unviable eggs, the number and percentage of emerged adults, weight, longevity and period from egg to adult of males and females, sex ratio, dry mass and dry mass consumed by insect were evaluated. In the genotype IAC Harmonia was observed the lower oviposition; RAZ 49 was the most non preference-type resistant for feeding and/or antibiosis-type resistant; BRS Supremo, IAC Carioca-Ete and IAPAR 81 are no preference for feeding and/or antibiosis-type moderate resistant; IAC Galante is susceptible and the other genotypes are highly susceptible to Z. subfasciatus.

An open source GPS multipath simulator in Matlab/Octave

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Application of pulsed Nd:YAG laser in thin foil microwelding

Experimental investigations were carried out using a Nd:YAG laser operating in pulsed mode for welding a lap joint between thin foil and thick sheet. The pulse energy was varied from 1.5 to 3.0 J at increments of 0.25 J with a 4 ms pulse duration. The base material used for this study was AISI 316L foils with 100 mu m thickness and sheet with 3.0 mm thickness. The welds were analysed by optical and electronic microscopy, tensile shear tests and micro hardness. The results indicate that pulse energy control is of considerable importance to join thin foil and thick sheet with good quality. The ultimate tensile strength of the welded joints increased at first and then decreased as the pulse energy increased. The process appeared to be very sensitive to the gap between couples. Large voids delimited by the molten zone boundary were observed in joints welded with high pulse energy.

Effects of laser beam energy on the pulsed Nd:YAG laser welding of thin sheet corrosion resistant materials

The aim of this study was to value the possibility to join, for pulsed Nd:YAG laser welding, thin foils lap joints for sealing components in corrosive environment. Experimental investigations were carried out using a pulsed neodymium: yttrium aluminum garnet laser weld to examine the influence of the pulse energy in the characteristics of the weld fillet. The pulse energy was varied from 1.0 to 2.5 J at increments of 0.25 J with a 4 ms pulse duration. The base materials used for this study were AISI 316L stainless steel and Ni-based alloys foils with 100 mu m thickness. The welds were analyzed by electronic and optical microscopy, tensile shear tests and micro hardness. The results indicate that pulse energy control is of considerable importance to thin foil weld quality because it can generate good mechanical properties and reduce discontinuities in weld joints. The ultimate tensile strength of the welded joints increased at first and then decreased as the pulse energy increased. In all the specimens, fracture occurred in the top foil heat-affected zone next to the fusion line. The microhardness was almost uniform across the parent metal, HAZ and weld metal. A slight increase in the fusion zone and heat-affected zone compared to those measured in the base metal was observed. This is related to the microstructural refinement in the fusion zone, induced by rapid cooling of the laser welding. The process appeared to be very sensitive to the gap between couples.

Cobalt(III) complexes with thiosemicarbazones as potential anti-Mycobacterium tuberculosis agents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da endogamia em Cotesia flavipes (Cameron, 1891) (Hymenoptera: Braconidae) criada em Diatraea saccharalis (Fabricius, 1794) (Lepidoptera Crambidae) ao longo de gerações

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Laços de afeto: as homoparentalidades pela via da adoção

Pós-graduação em Psicologia - FCLAS

Modeling of multiple cracks in reinforced concrete members using solid finite elements with high aspect ratio

This paper presents a new technique to model interfaces by means of degenerated solid finite elements, i.e., elements with a very high aspect ratio, with the smallest dimension corresponding to the thickness of the interfaces. It is shown that, as the aspect ratio increases, the element strains also increase, approaching the kinematics of the strong discontinuity. A tensile damage constitutive relation between strains and stresses is proposed to describe the nonlinear behavior of the interfaces associated with crack opening. To represent crack propagation, couples of triangular interface elements are introduced in between all regular (bulk) elements of the original mesh. With this technique the analyses can be performed integrally in the context of the continuum mechanics and complex crack patterns involving multiple cracks can be simulated without the need of tracking algorithms. Numerical tests are performed to show the applicability of the proposed technique, studding also aspects related to mesh objectivity.

Reprodução de papagaio-verdadeiro (Amazona aestiva) em cativeiro: perfil anual de esteróides sexuais e ensaio de estímulo hormonal exógeno

Pós-graduação em Medicina Veterinária - FCAV

Effect of sublethal doses of the insecticide imidacloprid on adaptive traits of Drosophila melanogaster: Response to treatment over and after 15 consecutive generations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativa da frequência da inversão SWBinv-1 entre pais de portadores ds síndrome de Williams-Beuren e pais de filhos normais do Brasil

Pós-graduação em Ciências Biológicas (Genética) - IBB

Relações de gênero e poder: a vivência de mulheres e homens sob o impacto da migração internacional. -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)