203 resultados para Gerenciamento de máquinas virtuais
Resumo:
The increasing degradation of the environment and the depletion of natural resources, caused by indiscriminate production practices, by current and unlimited human needs and also misconceptions that natural resources are inexhaustible, make current and future environment situation, a constant concern of national and world leaders. With the purpose to confront these issues and to qualify the cities on the environmental situation in the state of São Paulo, the Department of the Environment created, in 2007, the Program “Município VerdeAzul. This paper aims to the study this program of Unit Water Resources Management Pontal Paranapanema through specific analysis of data representing the efficiency of the program directives and a comparative study between two cities unit with discrepant scores and a survey of the possible causes of obtaining low scores for municipalities participating in the project. For such a method was used that consisted of a bibliographical survey related to the main environmental liabilities Brazilians... (Complete abstract click electronic access below)
Resumo:
In the district of Belém, at São Paulo’s city, the economic transformations have ended up destabilizing the economy industrial leaving marks that can be found today. Idle sheds, abandoned or undefined uses structures are found throughout the neighborhood, creating a scene of decay and abandonment. Despite the problems caused by brownfields, they may be seen as an area of possibilities. The reuse of these areas allows the reutilization of abandoned space in locations where the infrastructure is already available, stopping the expansion of urban spot in places not yet degraded. In the case of disabled older industries, there is a great possibility of site’s contamination that may also pose risks to people and unforeseen during refuncionalization. Therefore, the proper management of these sites is needed before any intervention in the area, where stages of study and research must be conducted in order to prove their actual situation. The survey and study of these areas in the district of Belém in São Paulo provides an overview about the brownfields in Brazil at the same time that contributes to the development of intervention plans and proposes a scenery for the refuncionalization of these sites in the neighborhood.
Resumo:
The growing need for organizations to make themselves present on the Internet, the study aimed to demonstrate the importance of public relations activity in crisis management and analysis of the crisis in Americanas.com site. It also aims to analyze the electronic scene, highlighting their implications for consumer relations in e-commerce. In addition, as a consequence of conflicts, settles a loss situation, financial and reputation. A crisis begins with planning and communication failures, it is clear that public relations is essential in business today, as interest in integrating their knowledge and opinions, and maintaining a global view of the environment in which it operates. The case study analysis provided confirmation that the public relations face a growing market, which requires qualified and updated to do crisis management, especially in the online environment
Resumo:
With the advent of technology, many repetitive processes before now was be simplified with the support of a simple computer. Therefore programming has been developed and new softwares appear every day. For the development of this project was used the Microsoft Visual Studio 2010, and with it the program was made in C # Windows Form mode. This work aims to develop a program that can read, send and receive data via the Universal Serial Bus (USB) to the computer, and thereby perform the processing. Thus the milk producer will possess the knowledge of the amount of milk produced by the animal. With the processing of data it is possible to generate graphs of herd production or a specific animal and you can also generate the required report date
Resumo:
The building sector can cause the environmental degradation, by the natural resources consumption, machinery use and natural landscape modifying. The environmental management system (EMS) improves the environmental quality and makes the companies more competitive. So, this work developed an environmental management system in a building site focused on the solid waste and in the development of mitigation proposals for the most significant environmental impacts. To develop this work it was necessary to follow the building site activities; evaluate the solid waste management; identify the law requirements; identify the environmental aspects and impacts; evaluate the environmental impacts; and propose alternatives for mitigating the adverse environmental critical impacts. The main proposals are the reduction of the waste generation in the place that it’s generated; the reuse and correct final disposal of that wastes; the treatment and reuse of the effluent; and the supervising in the trucks and machineries avoiding the oil spilling and the air pollution
Resumo:
L'un des facteurs nécessaires pour qu’une entreprise reste compétitive sur le marché est la création ou l'amélioration d'un produit afin qu’il réponde aux besoins et aux attentes des clients, ainsi, le Processus de Développement de Produits (PDP) est essentiel. Pour la réussite du PDP, il est souhaitable de suivre un système standard de gestion de projet. L'objectif de cette étude est d'analyser la gestion de projets dans le processus de développement de produits dans l'industrie automobile afin d'identifier les possibilités d’amélioration. Par conséquent, nous avons procédé à une revue de littérature sur le sujet, analysé les lignes directrices et les pratiques du processus de développement de produit dans l’entreprise. Comme résultat, il a été obtenu que le système de développement de produits créé par l’entreprise requiert la clarification des outils utiles à la gestion de projet. Un problème de communication et de gestion des coûts a également été constaté dans le domaine du développement du moteur lourd
Resumo:
In managing an Inpatient unit, nurses face the need to make decisions involving agents in the institution’s internal and external environments, and all these measures are influential, regardless of how beneficial they may be. Hence, ethical issues constitute an important dimension of nursing management. This study aimed at identifying measures and/or interventions adopted by managing nurses at Inpatient Units in the Botucatu School of Medicine University Hospital - UNESP with the purpose to analyze professional ethics. The study involved nurses holding technicalsupervision positions in sectors related to the Nursing Division, comprising a total number of 20. The exploratory method was used by means of taped interviews with a qualitative approach based on the Collective Subject Discourse. Human resources deficit was observed as nurses’ major concern in relation to nursing care provision. The managers seek the nursing staff’s development by means of educational activities in their own unit at the same time that they adopt those offered by the hospital. When ethical violations occur, they resort to measures ranging from individual strategies for violators’ orientation to legal intervention. The resolution of ethical conflicts by nursing managers generally occurs in a gradual fashion by taking into account their compromising level, whether in relation to the patient or to the multiprofessional team. Educational activities are focused on the development of technical skills aiming at preventing physical damage to patients although educational activities targeted at the development of professionals’ ethical awareness were not mentioned
Resumo:
Não disponível
Resumo:
Laboratory of Chemical Waste Management programs are being implemented in various universities of the country and the world, in recognition of the urgent need to change the reality of disregard for the environment, together with objective responsibility of the generator, and especially the awareness of sustainability. Analysis and research laboratories involve a range of waste in developing their studies with intrinsic characteristics related to their form of generation. The amount of waste generated in this segment is negligible compared to industrial activities, but the environmental issue is that these residues do not have a standard technique for treatment due to the potential variation of its composition. This research project, aiming their suitability and continuous improvement, aims to diagnose and analyze the current situation of the management and disposal of chemical waste generated by the laboratories IGCE UNESP, Campus Rio Claro / SP. Universities, through their research, teaching and extension, end up generating potentially hazardous chemicals that may contaminate the environment when they are disposed of improperly, with no concern for the environment and / or public health. Aiming to assist in improvements with respect to this issue, the purpose of this study is to understand the management and disposal of chemical waste from the IGCE, laboratories UNESP - Rio Claro / SP, in order to discuss the situation of such waste, and present proposals to reduce generation of the same and minimizing the environmental impact, thereby increasing the local hygiene through proper disposal. The research instrument used interviews, questionnaires, review of recent literature and observations were made in order to develop proposals for the management and disposal of waste. These proposals based on prevention and corrective control, where the preventive approach aims at lifting techniques and actions to reduce the generating sources and...
Resumo:
O presente trabalho avalia a interação usuário-produtor na Indústria de Máquinas Agrícolas (IMA) e procura demonstrar como esse padrão interativo promove a descentralização das atividades inovativas do setor, com enfoque no caso brasileiro. O Estudo de Caso das empresas multinacionais (Deere & Co, CNH Global NV e AGCO Corp.) corrobora a hipótese do desenvolvimento de projetos em território brasileiro com predominância de projetos de caráter derivativo
Resumo:
Health Care Waste (HCW) represents 1%, and it has presently gained a lot of importance. Adequate management is one of the great challenges to be faced by health care centers. It has gained distinction and been widely discussed by members of the sectors involved with sanitation, public health and environmental issues due to waste physical, chemical biological characteristics, which pose potential risk to the environment and public health. The present study aims at evaluating HCW internal management by following all its phases, determining indicators, classifying and quantifying, establishing production rates (kg /patient/day) for the sector and designing materials to disseminate appropriate HCW disposal in the Emergency Room of the UNESP University Hospital in the city of Botucatu according to the guidelines presently in force. : From June to October 2011, the waste flow was observed from its production to final disposal. Four weight measurements were performed on four consecutive days in the month of August by using a properly calibrated (in grams) digital scale at the times scheduled for collection of the produced waste. Hence, the daily and monthly amounts were estimated according to their classification. All the waste packaged in the bags in garbage cans in the Emergency Room for a 24-hour period was considered to be a sample. Separation was not adequately performed in that sector, and waste from Group A was mixed with that from Group D. The amount of infectious waste produced in the sector corresponded to 87.80 %, common waste to 10.93 % and recyclable waste to 1.27%. The mean daily HCW production was of 123.300 kg/day, and the total monthly production was of 3,822 kg/month, which was distributed as follows: Group A 3,355,750 kg/month; Group D 417,570 kg/month and recyclables 48,670 kg/month. The production rate corresponded to 0.47 kg/patient/day, thus showing... (Complete abstract click electronic access below)
Resumo:
Considering the growing degradation of the urban environmental quality resulting from the progressive sound pollution increase, as well as the consequent harmful effects about the human health, the present study had its central objective the argument and management tools implementation of the urban noise that can be integrated to the environmental planning in the city of Rio Claro (SP). Therefore, normative and bibliographical revisions were developed, that made feasible the directives of control argument and prevention of the urban noise, as well as the technical procedures of sound levels and evaluation’s definition and especially about the criteria applicable for the elaboration of an urban acoustic zoning methodology. Among the main results obtained detach: (1) the applicable legislation to the management of urban noise’s synthesis and argument; (2) the methodology of urban acoustic zoning development and (3) its implementation to determined areas of Rio Claro (SP) with the (4) respective cartography representation; (5) the mapping of sound levels in the central zone of Rio Claro (SP), (6) the obtaining and analysis of noise describers (LAeq, Lmáx, L10, L50, L90, Lmin and TNI) and the subsequent (7) acoustic maps elaboration for the main describers.
Resumo:
Distributed Virtual Environments (DVE) allow multiple users interact with a virtual world by sharing, manipulating objects. Each user has his/her own vision of this world and every changes of state of the environment are distributed among other users. Due to technological constraints, most systems for distributed virtual environments support a limited number of users. The major limitation for development of DVE scale are imposed by the communication system. As the number of users grows, the amount of bandwidth required to exchange information in real time among stations to upgrade the environment and keep it in a consistent state for all connected users. Based on this situation is proposed a framework that uses the protocol anycast in the application layer that provides a load balancing among servers in the region and aims at reducing the latency of message delivery between participants selecting the DVE server best suited for the region participant to connect to the environment
Resumo:
There are many approaches and techniques about Administration and Management of Projects in order to provide greater agility, efficiency and transparency during the development process of new products. Simultaneously, a pursuit for a management approach more flexible in its planning and strategic changes during the development campaign, such as, comprehend the project's unpredictability level and deal it by monitoring and estimates tools. These features tend to accentuate itself in manufacturers of complex products, as aircraft and other aerospace technologies. By these conditions thus research aims to describe a case when the Agile Management Processing of Project Development Scrum was used in the Test area of an aircraft manufacturer. Focused on the Scrum implementation over the area, its adaptation, evolution and achievements the research proposes to analyze the improvements, indicate the obstacles and discuss solutions, contributing then to the theoretical basis of the considered theme and futures updates applicable to the area. The research is classified as qualitative; furthermore the information and data analyzed were obtained by interviews with professionals and observations of the processes from the major aircraft manufacturer
Resumo:
Pressure drop and energy efficiency of compressors in chemical plants are the focus of this study. Its objective is an analysis of possible sources of energy loss through the study of pressure loss in pipes, calculation of thermodynamic efficiency of the compressors. Important issues are raised for this analysis such as the types of compressors, the operating range of each compressor, compression types, as well as a study of accessories such as filters and valves. After studying these issues was carried out calculations of pressure drop step-bystep and with a software WIPCD. Followed by the calculation of efficiency of compressors and monthly energy cost of each compressor in operation. Finally, the study shows some suggestions for immediate improvements, changes and suggestions for possible future purchases of compressors