164 resultados para Gás liquefeito de petróleo
Resumo:
In engineering, for correct designing the structural components required for cyclical stresses, it is necessary to determine a limit of resistance to fatigue, which is the maximum amplitude of the applied tension under which the fatigue failure does not occurs after a certain number cycles. The marine environment is hostile, not only by the high pressure, corrosion, but also by low temperatures. Petrol Production units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 up to 30 years, and must therefore be prepared to support various efforts, such as tidal, wind currents and everything that is related. This paper focuses on a study on the fatigue behavior of microalloyed steel, API 5L Grade X70, used to transport oil and gas by pipelines. For analysis, we obtained the curves S-N (stress vs. number of cycles) using laboratory data collected from cylindrical longitudinal and transverse specimens used in axial fatigue test in accordance with ASTM E466. The tensile tests and microhardness were performed to characterize the mechanical properties of the samples, and it was found that the values meet the specifications of the standard API 5L. To characterize microstructurally the material, it was also made a metallographic analysis of the steel under study, and the origin of the fatigue crack was investigated with the support of a scanning electron microscope (SEM).
Resumo:
Não disponível
Resumo:
In order to enable the reuse of the large surplus volume of petroleum produced water for irrigation of crops inedible, the quality evaluation of this water is very important. This work aimed to evaluate the effectiveness of the diffusive gradient in thin films technique (DGT) for the determination of labile Cu (II), Mn (II) and Zn (II) in petroleum produced water destined to reuse in agriculture. Samples were collected at the exit of the wastewater treatment plant (WWTP) (after separation oil/water and flotation) of a Petrobrás onshore production region. Basically, the laboratory experiments with DGT devices involved the evaluation of the behavior of the main variables of the technique for determination of analytes in the samples (diffusion coefficients, immersion time, fractionation of organic and inorganic species, and performance of diffusion gels with different porosities, among others). Also, experiments were conducted based on the solid phase extraction (SPE) protocol with Chelex- 100 resin using previously established protocols to support the study. During the project the possibility of in situ immersions in water treatment plants was evaluated. The DGT technique presented satisfactory results for determination of Mn in produced water, and can be used for in situ determinations. However, the results obtained for Cu and Zn show the need of additional studies
Resumo:
Os efluentes de indústrias, como refinarias e petroquímicas, frequentemente contém elevadas concentrações de substâncias tóxicas, dentre elas, os compostos fenólicos. Estas substâncias, mesmo em pequenas quantidades, afetam as propriedades organolépticas da água, além de que durante o processo de cloração da água potável, podem ser transformadas em clorofenóis e policlorofenóis, pela reação com o cloro, formando substâncias com características carcinogênicas. Neste sentido, o refino do petróleo produz grande variedade de poluentes cujas propriedades modificam-se em função dos processos utilizados. Os fenóis são compostos tóxicos, com características fungicida e desinfetante, sendo tóxico para a maioria dos microrganismos, além de apresentarem ação de carcinogenicidade, mutagenicidade e serem recalcitrantes, acumulam-se nos corpos receptores, gerando danos à saúde e à vida aquática. No entanto, embora o fenol possua ação bactericida, alguns microrganismos adquiriram a habilidade de se adaptar e utilizar este composto como fonte de carbono e energia. O presente trabalho pretendeu selecionar linhagens bacterianas, a partir do efluente de uma refinaria de petróleo, da região de Paulínia – SP, que sejam capazes de utilizar altos teores de fenóis como fonte de carbono e energia para seu crescimento e desenvolvimento, a fim de serem aplicadas nas estações de tratamento de efluentes industriais, com foco nas refinarias de petróleo. Foram isoladas 3 linhagens a partir das amostras enriquecidas do efluente da refinaria e, após os ensaios, constatou-se que 1 linhagem apresentou resistência à concentração de fenol de 1.000 mg.L-1. Os ensaios de biodegradação e crescimento em fenol como única fonte de carbono, demonstraram que estas linhagens são capazes de biodegradar aproximadamente 20% do fenol disponível no meio, no período de 24 horas. A quantificação do fenol residual foi realizada em...
Resumo:
The biomass gasification systems have been used for a long time and prove to be a good alternative to the generation of energy problems. This type of management requires a simple installation and maintenance which gives them a high availability. In Biomass project via Call CTEnerg 33/2006-1, funded by the Ministry of Science and Technology - MCT - Brazil, the Group Energy Systems Optimization – GOSE - at FEG - UNESP built and tested two prototypes of gasifiers. These is fed with 25 kg / h of dry wood (chips), and 50 Nm3 / h of air to produce gas at a flow rate of approximately 70 Nm3 / h of wood (syngas) at a temperature approximately 600 ° C. In this work of graduation, studies were conducted on the materials used in both the gasifier as well as cleaning the filter synthesis gases. The system of gas cleaning and conditioning is vital to ensure the life of the Internal Combustion Engine. In this case the studies of different filters for small gasification systems (properties, materials used, characteristics, types, etc.) are very relevant to its use in the prototype of the college campus. Were also performed a technical and economic analysis of a cogeneration system that consists in the combination of the downdraft gasifier studied in this work, an internal combustion engine, two heat exchangers and a SRA (absorption system refrigerator). Were calculated the costs of electricity generation, hot water and cold water. Finally, we analyzed the economic feasibility of the project
Resumo:
The oil market is not a common market, and its complexity increases dramatically when considering the strategic and geopolitical involved, thus resulting in large uncertainties and concerns. The attempt to control prices has always been a challenge for the major world powers, since the increase in oil prices benefits the exporting countries, but harms importers, especially those regarded as less developed. Understand and try to predict some strategies adopted up the oil crises is one of the main points of the research, in order to demonstrate how economics can be used as an instrument of power and domination between nations, and how plans and strategies and rearrangements of supply and demand favor the growth of this economy, especially in the current period, with the new Brazilian oil era, beginning with the discovery of pre-salt, amid a context of growing need for the use of oil and its derivatives
Resumo:
In this paper are compared two methods of deploying electrical substations, conventional type, when installed at open areas (Air Insulated Switchgear - AIS), and compact gas-insulated (Gas Insulated Switchgear - GIS) when installed inside buildings. With the expansion of urban centers, areas available for deployment of conventional substations become increasingly difficult to find in these locations. Also due to speculation in urban areas, it becomes feasible to install Gas Insulated Switchgear. This paper presents and evaluates criteria with advantages and disadvantages for application of the two methodologies, aiming to assist in decisionmaking moment of choice in deployment of Electric Power Substations in two scenarios. It is expected that at the end of this work, the criteria evaluated assist in this decision making
Resumo:
The aim of this work is to make a qualitatively and ecologically evaluation of a compact cogeneration system that operates with synthesis gas obtained from a gasifier. Using the Eucalyptus Biomass as fuel, that passes through a wood gasifier (Drowndraft type) and supply the internal combustion engine. The compact cogeneration system is composed of two heat exchangers, an energy generator connected to an internal combustion engine and an absorption refrigeration system. The complete system is installed in the laboratory from the Energy Department at the University of Guaratinguetá. By the analysis related to the First and Second Thermodynamic Laws applied in this system, was possible to identify the mass flows in each point, energetic efficiency, irreversibility and exergetic efficiency. The components that have the biggest irreversibilities are the gasifier, followed by the internal combustion engine, which should be focused in future improvements. The system efficiency in energetic basis is 51,84% and in exergetic basis is 22,78%. Using the ecologic efficiency methodology was possible to identify the emissions rates, the pollution indicator associated to the combustion of the synthesis gas in the internal combustion engine. The ecologic efficiency considering the energectic analysis is 91,73%, while considering the exergetic analysis, 83,65%. It is concluded that the use of the synthesis gas in a compact cogeneration system is viable from the technical and ecological point of view, making possible to generate energy for isolated communities and promoting the decentralized electricity generation
Resumo:
Ensuring availability of quality water for human consumption causes becomes an increasing number of studies for the analysis of effluent before and after treatment, so that its release into receiving bodies do not cause significant changes in the river water and on the biological communities related to them. The biomarkers of toxicity have long been used to verify the potential toxic effluent and its correlation with the treatment efficiency of them. In this context, the cladoceran Ceriodaphnia dubia stands out because it is a benthic aquatic organism highly sensitive to environmental changes. In this study, to evaluate the interference of the release of treated wastewater of oil refinery in Rio Atibaia, we sought to determine the toxicity on population dynamics of Ceriodaphnia dubia microcrustacean in water samples upstream and downstream from the launch site, compared with samples from Rio Jaguarí at the point of capture by the company itself and treated effluent. We have studied the number of offspring produced in 10 replicates, each starting with a test individual of up to 24 hours for each sample and correlated the results with physical-chemical and microbiological tests performed by a laboratory technician. For most tests, the results indicate that the treated effluent gives sub-lethal toxicity to the microcrustacean, as delay the onset of the reproductive cycle of the same
Resumo:
Through measurements of basic parameters for determining the fluidization regime, as particle size, minimum fluidization velocity, bed porosity, etc., This paper analyze the mass distribution of the phases of the bed to be discussed in relation to: the flow gas physical properties of the solid particles and the forces acting on the solid particles circulating within the bed, as the weight force, buoyancy and drag forces (Stokes' Law). Due to the weight force is constant, open up the discussion about which of the other two forces, buoyancy and drag force, influencing the behavior of the bed. We used the photographic method to realize the statistical analyzes. Therefore, we can conclude what changes can be made more convenient in fluidizing the bed to obtain the highest efficiency for a good mixing used in industrial processes
Resumo:
The metropolitan region of São Paulo is the most populous of the country, this happens because of its great importance in the national economy and the job opportunities that are offered to the population. These factors result in intense population growth and urban expansion, reaching some non-habitable places of the metropolis, as areas of pipelines, which are very important for the transportation of natural gas, oil and its derivatives. Before the population growth of the region, these sites were unoccupied, do not presenting problems for the population. However, with the disorderly occupation is generated great anthropogenic pressure on the pipeline stitches, causing risks to people who are around them. Therefore it is extremely important to monitor the strip of pipelines through products and techniques of remote sensing and geoprocessing, enabling, through high spatial resolution images, identification of objects or phenomena that occur on Earth's surface that can alter the functioning and safety of pipelines. Therefore, this study aims to monitor a stretch of the area of the pipeline mesh GASPAL/OSVAT and Capuava Refinery (RECAP), located on the outskirts of the metropolitan area of São Paulo in the city of Mauá, who suffer great human pressure, proving thus the techniques of remote sensing and geographic information system (GIS) as effective tools for monitoring phenomena occurred in urban areas of great complexity. The monitoring was done by object-based classification applied in orbital images Ikonos II and RapidEye, of high spatial resolution and, image processing, detection of objects, segmentation, classification and editing were developed through the eCognition and ArcGis softwares. To determine the statistical accuracy of the mapping of the land cover of the stretch of pipeline in Maua, the results were analyzed by error matrix... (Complete abstract click electronic access below)
Resumo:
Over the years, the concern with the detection of the levels of radionuclides in the environment has increased, given that they are carcinogenic to the human respiratory system. Present in the air, waters, soil and building materials, among other substances, radionuclides are unknown by most of the population. In this paper, we present the radioactive gas 222Rn, predominant element among all others and one way of detecting it in an example study of the waters of the Presidente Prudente - SP, through the plastic detector called CR-39. Likewise, we realized the need to approach this issue more broadly in schools and even in higher education, since this field of modern physics and environmental physics usually appears only in master's and doctorate. Thus, we attempted to perform the didactic transposition schooluniversity, through the construction of an object Educational, OE, to be placed on the Bank for International Educational Objects - bioethanol and by developing this contribute to the knowledge and understanding of the importance of monitoring of radioactivity in a way accessible to the population as a whole
Resumo:
This study aimed to perform the analysis and characterization of environmental sensitivity to oil from Baixada Santista in the State of São Paulo. The work was done by integrating data of physical environmet, socio-economic activities and the biological / ecological provided by the Research Group on Environmental Sensitivity to Oil Spill in the Institute of Geosciences and Exact Sciences of UNESP “Julio de Mesquita Filho” wich works in the conjunction with the Program of Human Resources Training in Geosciences and Environmental Sciences Applied to the Oil and Gas (PRH-05) of the National Petroleum Agency (ANP). Were also performed descriptive statistical analysis, based on dispersion and trend parameters, which allowed to answer questions related to environmental sensitivity index (ISL) prevalence, the predominance of the ISL by environment and the predominance of the environments of the area, thus providing an overview of Baixada Santista’s main towns about sensitivity to oil. Analyses performed in this study may also help mitigate the environmental and socioeconomic impacts and contribute to contingency plans development for Baixada Santista
Resumo:
The analysis of the extraction process in oil wells is presented exploring the challenges to the effectiveness of the procedure is shown step by step in the process. There is an analysis of the major tools and equipment needed in the drilling process, promoting the understanding of the challenges in the pre-salt layers, compared to conventional processes. The work is reinforced through studies of the influence of the corrosive compared not corrosive environment in drill strings
Resumo:
Não disponível