Anatomia de órgãos foliares de Mapania Aubl. (Mapanioideae, Cyperaceae)

Estudou-se a anatomia dos órgãos foliares (folhas basais, ou catafilos, no caso de folhas ausentes, e brácteas involucrais) de três espécies de Mapania Aubl. Os espécimes de Mapania macrophylla (Boeck) H.Pfeiff. e M. pycnostachya (Benth.) T.Koyama, pertencentes à seção Pycnocephala, e M. sylvatica Aubl., pertencente à seção Mapania, foram coletados durante expedições científicas na Reserva Florestal Ducke em Manaus, AM, e constituem representantes de um mesmo gênero que ocupam três ambientes distintos da Floresta Amazônica. Em todos os órgãos, as espécies apresentam epiderme uniestratificada, com células de paredes delgadas, e estômatos paracíticos na face abaxial, no mesmo nível ou um pouco acima das demais células epidérmicas. O mesofilo é homogêneo e apresenta dois padrões distintos nos órgãos foliares: o primeiro com feixes vasculares em um único nível, sem extensão de bainha, idioblastos fenólicos abundantes e aerênquima não conspícuo; e o segundo padrão com feixes vasculares maiores e menores intercalados, com extensão de bainha do feixe e interrompidos por aerênquima conspícuo com células translúcidas. O primeiro padrão foi encontrado em brácteas involucrais de M. sylvatica e o segundo em todos os órgãos foliares das demais espécies. Essa diferença corrobora com as seções estabelecidas e é importante na diferenciação de espécies dentro do gênero. No pseudopecíolo de M. pycnostachya foi observada a presença de hipoderme, caráter importante na diferenciação de Mapania e Hypolytrum e que, portanto, necessita ser melhor estudado no gênero. Ainda, a presença de aerênquima, células epidérmicas com parede delgada e posição dos estômatos refletem a adaptação dessas espécies a ambientes úmidos de várzea e igapó onde são encontradas

Estudo teórico da contribuição do espalhamento nuclear não elástico na trajetória de prótons de energias entre 50 e 250 MeV em materiais de interesse em radiologia: aplicação em tomografia com prótons

The goal of this work is to study the process of interaction of protons with matter through Monte Carlo simulation. For this purpose, it was employed the SRIM program (Stopping and Range of Ions in Matter ) and MCNPX (Monte Carlo N-Particle eXtended) v2.50. This work is going to support the development of a tomography system with protons. It was studied the interaction of proton with the follow materials: Polimethyl Mehacralate (PMMA), MS20 Tissue Substitute and water. This work employed energies in range of 50 MeV and 250 MeV, that is the range of clinical interest. The energy loss of proton after cross a material layer, the decreasing of its intensity, the angular and lateral de ection of incident beam, including and excluding nuclear interactions. This work is related with Medical Physics and Material Physics, like interaction of radiation with matter, particle transport phenomena, and the experimental methods in Nuclear Physics like simulation and computational by Monte Carlo method

Processo de esmerilhamento, polimento e caracterização de um Shear Plate

Shearplate is an optical glass plate having two flat surfaces and a small angle between them. The use of a high quality shear plate is essential to implement shear interferometric technique . The shear interferometry is a technique used to evaluate the light beam collimation. In order to guarantee the shearplate quality , the complete manufacturing process must be thoroughly monitored. In the manufacturing process, the first step consisted of the glass selection. The selected glass has been submitted to the process of cutting, gluing, chamfering, grinding and polishing. Each phase has been strictly monitored. The quality of the final result depends extremely on an appropriate starting condition, which arises from the grinding process, as the polishing process only recovers the brightness of the part, acting on a small scale on the wearing off of the part, as well as not changing the structured obtained in the grinding process. Respecting all stages of the manufacturing process, the quality of the part has evolved to a good result. The best result obtained showed PV distance of 162 nm, slightly less than λ / 4. This result is significant because the dimensions of the piece with respect to the dimensions of the polisher what interferes directly in the results. The closer are the dimensions of piece and the dimensions of the polisher, the greater the difficulty in controlling the propagation of errors

Análise da influência da concentração de feixeis de fibras de bambu em ensaios de piso

Bamboo has one of the highest growth rates among plants, however, its lignifications (which confers resistance) takes around a few years and, therefore, certain physical characteristics and mechanical, that depend on this process will only be acquired between the three to six years old. In addition, bamboo also has significant density variations in different parts of the stem, both in the radial direction as the axial. In particular the radial direction, where the density found in the inner and outer (near the bark) of a single stem can range on average from 0.5 to 0.9 g/cm3. Thus, the application of bamboo as a floor, there to examine whether both sides of the bamboo (internal and external), provide resistance properties required for that purpose. In this study sought to characterize and quantify the influence of the concentration of fiber bundles in the inner and outer sides of rules or bamboo strips of bamboo flooring through testing service. Analyses performed were based on ASTM D 2394- 83 for wooden floors and derivatives. This was necessary because of the absence of a specific prohibition of the use and testing of floors made of bamboo and its products. The data were analyzed by ball indentation test shooting, test for resistance to abrasion, indentation test for stress / load treadmill test and by indentation loads applied to small areas - test the jump. The results of the tests were extremely friendly bamboo, even this presents considerable differences between the resistances obtained from assay of the cover of the inner and outer face, being comparable with those of many commonly used to manufacture wood flooring. This comparison was made possible by information from technical trials of several floors made with wood

Calibração do Modelo de TBC para cálculos de espectros de raios-X

As normas nacionais e internacionais prevêem que a manutenção dos níveis de radiação deve estar abaixo do permitido. Sendo assim, a ICRP [1] (International Commission on Radiological Protection) exige métodos de otimização para garantir que o público esteja exposto aos menores níveis de radiação possíveis. Como método de otimização, aproximações teóricas e semi-empiricas podem realizar uma determinação do espectro de raios-X, sendo fundamental para o diagnóstico de energia, estimando a dose de radiações em pacientes e formulando modelos de blindagem. Métodos adequados de radioproteção foram desenvolvidos na física médica como a medicina nuclear, a radioterapia e a radiologia diagnóstica. Um dos métodos semi-empiricos utilizados é o modelo de TBC que é capaz de reproduzir e calcular os espectros gerados pelo anodo de tungstênio. Com o modelo de TBC modificado é possível também obedecer às exigências das barreiras protetoras presentes na radiologia, levando em conta a forma de onda arbitrária e a filtração adicional na geração do espectro não presente no modelo original. Além disso, realiza-se a calibração do espectro gerado para que o modelo de TBC represente a quantidade e comportamento de radiações típicas. Dessa forma, realiza-se uma revisão do modelo de TBC implementando-o ao programa matemático Matlab e comparando-o com os resultados adquiridos pelo Código MCNP-5 no Método de Monte Carlo. Os resultados encontrados são bastante satisfatórios, tanto em termos quantitativos quanto qualitativos dos feixes. Para a calibração, desenvolve-se uma análise dos espectros gerados pelo TBC Modificado aplicado ao programa Mathcad e Matlab sob as mesmas condições. Os espectros gerados apresentam o mesmo comportamento, diferindo em até 12% nos valores encontrados para camadas semi-redutoras, coeficiente de homogeneidade e energia efetiva

Estudo teórico da contribuição a dose de partículas secundárias geradas por prótons de energias entre 100-200 MeV num phantom de osso compacto

The contribution of the total dose due to deposition of secondary energy particles caused by nuclear inelastic processes (n, 2H, 3H, 3He and  ) in proton therapy is an opened problem and in discussion. In the calculations of plans implemented for routine treatment, the paid dose is calculated whereas that the proton loses energy by ionization and or coulomb excitement. The contribution of inelastic processes associated with nuclear reactions is not considered, mainly due to the difficulty of processing targets consisting of various materials. In this sense, there are only estimates for pure materials or simple composition (water, for example).This work presents the results of simulations by the Monte Carlo method employing the code MCNPX v2.50 (Monte Carlo N-Particle eXtended) of the contribution to the total dose of secondary particles. The study was implemented in a cylindrical phantom composed by compact bone, for monochromatic beams of protons between 100 and 200 MeV with pencil beam form

Estudo da deposição de energia das radiofrequências através do método das diferenças finitas dependentes do tempo Monografia

Radiotherapy in veterinary practice is already known and widely distributed in large specialized centers of developed countries. In early 2000, there were about 30 radiotherapy equipment specifically designed for the veterinary clinic in the United States. In Brazil, the veterinary radiotherapy is still confined to research in universities, where most of the procedures is radiation therapy performed with superficial x-ray machines, with a voltage between 50 and 150 kVp, focus-distance surface (DFS) between 20,0cm and 40,0cm. As that occurs in human medicine, new research strengthens the development and prospects for the use of radiotherapy as a safe option for treating cancer in animals. This paper presents a methodology for calculating the exposure time for superficial radiotherapy procedures in veterinary medicine for small animals (dogs and cats). The dosimetric parameters of X-rays are determined using a spreadsheet tool for Microsoft Office Excel, developed in this paper for a device Dermopan 2, Veterinary Hospital of UNESP in Araçatuba. Using the worksheet helps the veterinarian to determine the time of exposure to radiation determined for each clinical case, optimize the workflow for professionals in veterinary radiotherapy procedures, which often lack the medical physics in team and at the time of radiotherapy. The correct use of spreadsheet decreases the chances of errors in dose rates of radiation, providing a higher quality of care

Localização automática de pontos de controle em imagens aéreas baseada em cenas terrestres verticais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Revisão dos principais radiofármacos utilizados no Brasil e suas aplicações na detecção e terapia de patologias

Radiopharmaceuticals are substances marked with radionuclides that can be used for detection and treatment of cancer, infections and inflammatory diseases. They emit several types of radiation through different decay routes, each radioisotope with its specific properties and uses. They can usually be produced from several different materials, by bombardment with particle beams in a nuclear research reactor or cyclotron, depending on their characteristics. Brazil has four public institutions which produce - or import - and distribute radiopharmaceuticals to hospitals and clinics throughout its territory. The largest such institution, Ipen, distributes 97% of radiopharmaceuticals used in the country. Some radiopharmaceuticals decay very quickly, meaning they must be produced and quickly administered to the patient in the same location, presenting a logistical challenge. Nuclear medicine in Brazil is a promising field and has been steadily growing, although rigid laws and a lack of qualified work force hinder Research and Development efforts for new radiopharmaceuticals. The construction of a new nuclear research reactor, in 2016, should generate self-sufficiency and economy in radiopharmaceutical production and avoid a future crisis in the supply of technetium-99m, the most important radioisotope, used in over 80% of procedures with radiopharmaceuticals.

Efeito do ângulo de derrubada no rendimento do Feller Buncher em floresta de Eucalyptus spp

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Tratamento da síndrome do túnel do carpo com laser

Pós-graduação em Bases Gerais da Cirurgia - FMB

Anatomia de espécies brasileiras de Eriocaulaceae: Comanthera e Syngonanthus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aprimoramento da capacidade de visualização espacial com a utilização de hologramas

This articles aims to approach the possibilities of holograms utilizations on three-dimensional that, while explored, allow the improvement of the spatial visualization ability. A hologram is a three-dimensional image recorded by laser that results in an image of three dimensions from the essential use of light.

Distribuição de espécies com folhas homobáricas e heterobáricas no Cerrado e na Floresta Estacional Semidecídua

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biocompatibilidade e bioatividade de cimentos à base de silicato tricálcico: estudo in vitro e in vivo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)