Estudo de métodos para anotação linguística e extração de conceitos na aquisição de ontologias a partir de textos

Não disponível

Estudo da secagem natural e forçada das folhas de Corymbia Citriodora a partir da extração de óleos essenciais

Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield

Extração de isosuperfícies a partir de dados meteorológicos

This work aims viewing weather information, by building isosurfaces enabling enjoy the advantages of three-dimensional geometric models, to communicate the meaning of the data used in a clear and efficient way. The evolving technology of data processing makes possible the interpretation of masses of data increasing, through robust algorithms. In meteorology, in particular, we can benefit from this fact, due to the large amount of data required for analysis and statistics. The manipulation of data, by users from other areas, is facilitated by the choice of algorithm and the tools involved in this work. The project was further developed into distinct modules, increasing their flexibility and reusability for future studies

Desenvolvimento de metodologias analíticas para determinação de selênio, cobre e manganês por GFAAS em amostras de vegetais de cultura orgânica e convencional utilizando extração por ultra-som

No presente trabalho é proposto um método para determinação de cobre, manganês e selênio em amostras de vegetais de cultura orgânica e convencional utilizando ultra-som no processo de extração dos analitos e posterior quantificação por espectrometria de absorção atômica em forno de grafite (GFAAS). Utilizando como solução extratora HCl 0,10 mol L-1, as condições ótimas de extração estabelecidas foram: massa de amostra de 100 mg; granulometria da amostra < 60 m; tempo de sonificação de cinco ciclos de 40 s e potência de sonificação de 136 W. As determinações dos analitos por GFAAS foram feitas utilizando-se temperaturas de secagem de 90-250 oC, temperatura de pirólise de 1300 oC, temperatura de atomização de 2300 oC e temperatura de limpeza de 2800 oC. Foi utilizado como modificador químico nitrato de paládio co-injetado junto com as amostras e tungstênio como modificador permanente. A exatidão e precisão do método de extração proposto foram avaliadas utilizando-se padrão certificado Corn Bran, RM 8433 – National Institute of Standards and Technology. Os resultados obtidos pelo método de extração por ultra-som mostraram-se equivalentes aos obtidos pelo método utilizando-se mineralização ácida das amostras em forno de microondas. No entanto, a metodologia proposta diminui consideravelmente o tempo de análise, o que favorece a velocidade analítica. Além disso, a quantidade de resíduos gerados para o ambiente também é bastante minimizada

Estudo da tecnologia e processos de extração em poços de petróleo

The analysis of the extraction process in oil wells is presented exploring the challenges to the effectiveness of the procedure is shown step by step in the process. There is an analysis of the major tools and equipment needed in the drilling process, promoting the understanding of the challenges in the pre-salt layers, compared to conventional processes. The work is reinforced through studies of the influence of the corrosive compared not corrosive environment in drill strings

Eficiência das resinas XAD4 e C18 na extração de compostos mutagênicos presentes em efluente de refinaria de petróleo para a realização do Teste de Ames

Não disponível

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Microalgas na Produção de Biodiesel: Extração e Composição Lipídica

The uninterrupted rise in emission of greenhouse gases open way to the use of biofuels, due to politics that focus on fuel safe, clean and renewable. The use of microalgae for biodiesel production has been described as one of the most promising sources of biomass for biofuels. The aim of this study was to evaluate the extraction and lipid profile of the microalgae Dunaliella tertiolecta, Isochrysis galbana and Tetraselsim gracilis. The extractions were performed with solvents chloroform /methanol and petroleum ether. The lipid profile was analyzed by gas chromatography after transesterification.The petroleum ether showed more efficiency in the extraction, the best result obtained was in the microalgae D. tertiolecta with 19.52% of lipid. The lipid profile analysis indicated a biodiesel stable to oxidation and elevated viscosity

Influência do porta-enxerto, da configuração de extração e do período de maturação no teor de limonina e na aceitação sensorial do suco de laranja Pêra-Rio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Inserção e extração de marca d'água em imagens digitais usando a transformada wavelet

Pós-graduação em Engenharia Elétrica - FEIS

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ

Micro-extração em fase sólida (SPME) in situ e comparação de compostos voláteis em variedades de manga (Mangifera indica L.) resistentes e suscetíveis à mosca-das-frutas Anastrepha obliqua (Macquart) (Diptera: Tephritidae)

Pós-graduação em Química - IQ

Estabilidade oclusal a longo prazo de Classe II, divisão 1, após tratamento com extração de pré-molares

Patients are looking for esthetic and functional changes when seeking orthodontic treatment and expect the remaining of a stable occlusion. Occlusion stability is one of the goals of the orthodontist; however, dental relationships changes in long-term can occur leading to a relapse of the treatment. Teeth and shape of arches tend to return to the original form, been the retention phase important after the appliance removal, even after several years of post-treatment. This article approaches a submission of a clinical case of Class II division 1 treated with extraction of premolars analyzing its long-term stability.

Extração seriada: considerações clínicas

The early malocclusion treatment has increased interest of orthodontic community. Among these is the serial extraction that harmonizes the differences between the amount of dental material and permanent deficiency of supporting bone. The technique is applied in mixed dentition through a predetermined sequence of extractions between deciduous and permanent teeth, in order to reach spontaneous immediately alignment of remaining permanent teeth with a minimum orthodontic mechanics. It will be reported a case where the serial extraction was performed in a growing patient with biprotrusion, Class I malocclusion and severe crowding. All functional and aesthetics goals were reached.