Temperatura e substrato para a germinação de sementes de Piptadenia moniliformis Benth.

In germination tests, substrate and ideal temperature are important for providing favorable conditions for the germination of seeds and the eventual development of seedlings. This research aimed at evaluating the effects of temperature and substrate on the germination of Piptadenia moniliformis Benth seeds. Two trials were done. In the first, seeds were submitted to germination under constant temperatures of 5 to 40 degrees C (increases of 5 degrees C) and alternated temperatures of 20-25, 25-30, 30-35, 20-30, 25-35 and 20-35 degrees C on paper. In the second trial, temperatures of 25, 20-30 e 20-35 degrees C were used in the substrates on (OP) and between paper (BP), on (OS) and between sand (BS), on (0V) and between vermiculite (BV) and paper roll (PR). The following traits were evaluated: percentage of seeds with protrusion of primary root and normal seedlings; speed germination index; length of primary root and of the hypocotyls and the dry mass of seedlings. A completely randomized design was used with 14 treatments. In the first experiment and a factorial scheme of 7 x 3 (7 substrates and 3 temperatures) was used in the second with four replicates of 25 seeds each. In the first experiment the constant temperatures of 25 e 30 degrees C and the alternated of 20-30 e 20-35 degrees C provided best results for the germination of seeds. In the second, the temperature of 25 C associated with the substrates BP, BS and BV surpassed the other treatments proving adequate for carrying out the germination tests of Piptadenia moniliformis Benth seeds.

Efeito do sombreamento e do substrato sobre a germinação e o crescimento de plântulas de Acacia mangium e Acacia mearnsii

The speed and uniform germination of seeds, followed by the prompt seedling emergence, are highly desirable characteristics in seedling production. Studies aiming to enable the use of organic waste such as sewage sludge and pine bark in the supply chain represent a current demand. The aim of this study was to identify conditions of shading and substrate which are more favorable to the process of seed germination and seedling growth of Acacia mangium and Acacia mearnsii. After overcoming dormancy in hot water, the seeds were sown in three substrates: substrate plantmax commercial forest (control), pine bark and pine bark mixed with biosolids (1:1). The tubes were placed in a tree nursery under three shading conditions: 50%, 30% and 0% (full sun). The evaluated parameters were: speed and germination percentage (daily until 30 days) and shoot length of seedlings (weekly from 75 to 150 days). The experiment was a completely randomized design with treatments in a factorial 3 x 3 and the results were submitted to regression analysis. The highest germination was obtained in the sowing of Acacia mangium in pine bark at 30% shading and commercial substrate at 30 and 50% shading for Acacia mearnsii in pine bark under 50% shading or commercial substrate in full sun. For both species, seedlings grew faster and reached larger size in the final substrate of pine bark with biosolids and in any condition of shading (30 e 50 %) and full sun, anticipating the production of seedlings.

Posição da semente na semeadura e tipo de substrato sobre a emergência e crescimento de plântulas de Schizolobium parahyba (Vell.) S.F. Blake

Rapid and uniform germination of seeds followed by prompt emergence are highly desirable characteristics for the production of seedlings. The aim of this study was to identify sowing positions and types of substrate most likely to the seed germination process and growth of seedlings of Schizolobium parahyba (Vell.) S.F. Blake. To germinate the seeds, they were placed in the following positions in relation to the bottom of the furrow in the substrate: hilum uppermost, hilum at the bottom, supported on one side, seed on edge with its sides parallel to the walls of the bag. Three substrates were used: commercial plantmax substrate (control), pine sawdust and sand. The substrates were fully randomized in a 4 x 3 factorial design (four seed positions and three substrates), with four replications of 20 seeds. The parameters evaluated were: the percentage of emergence, the after emergence seedling deaths, the first-count test, the emergence speed index, and the seedling aerial part length. It was concluded that all the seed positions in pine sawdust sowing offer the more favorable conditions for the germination process and seedling growth of Schizolobium parahyba.

Influência da densidade básica da madeira de clones de Eucalyptus grandis x Eucalyptus urophylla na qualidade da polpa branqueada.

The study analyzed the wood basic density effect in two Eucalyptus grandis x Eucalyptus urophylla hybrid clones (440 kg/m(3) e 508 kg/m(3)) on bleached pulp quality (fiber dimensions and physical-mechanical properties). The woods performance on pulping, bleaching and beating results were analyzed. The Kraft pulping was carried out in forced circulation digester in order to obtain 17 +/- 1 kappa number targets. The pulps were bleached to 90 +/- 1 using delignification oxygen and D0EOPD1 bleaching sequence. Bleached pulp of low basic density clone showed, significantly, lowest revolutions number in the PFI mill to reach tensile index of 70 N.m/g, low Schopper Riegler degree and generated sheets with higher values to bulk and opacity. These characteristics and properties allow concluding that bleached pulp of low basic density clone was the most indicated to produce printing and writing sheets. The bleached pulp of high basic density clone showed higher values of bulk and capillarity Klemm and lower water retention value when analyzed without beating. The bleached pulp of high basic density clone showed more favorable characteristics to the production of tissue papers.

Utilização de esgotos domésticos tratados através de um sistema biológico na produção de mudas de Croton floribundus Spreng. (Capixingui) E Copaifera langsdorffii Desf. (Copaíba)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise operacional e econômica do processamento de madeira de Eucalitpo com Hypro em região montanhosa

O processo constante de avaliação técnica e econômica dos sistemas de colheita de madeira é intrínseco às empresas florestais, devido ao fato de corresponder a uma fase de suma importância que despende elevado investimento financeiro. No experimento deste trabalho, estudaram-se o rendimento operacional e custos operacionais e de produção do processador florestal Hypro. A análise técnica englobou estudos de tempos e movimentos pelo método de tempo contínuo. O rendimento operacional foi determinado através do volume, em metros cúbicos de madeira processada. A análise econômica incorporou os parâmetros do custo operacional, custo de processamento da madeira e rendimento energético. A análise dos dados evidenciou que o rendimento operacional por hora efetiva de trabalho foi de 38 árvores e, em metros cúbicos sem casca por hora efetiva de trabalho, de 11,68 m³ h-1, com custo de processamento de madeira sem casca de US$ 6.85 por metro cúbico.

Efeito do tamanho de tubetes na qualidade de mudas de Jatobá (Hymenaea courbaril L. var. stilbocarpa (Hayne) Lee et Lang.), Ipê-amarelo (Tabebuia chrysotricha (Mart. ex DC.) Sandl.) e Guarucaia (Parapiptadenia rigida (Benth.) Brenan)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional

A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.

Influência do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m(3)sc, with a mean of operating cost of US$ 78.78 per work hour.

Composição do substrato sobre o desenvolvimento, qualidade e custo de produção de mudas de Eucalyptus grandis Hill ex Maiden x Eucalyptus urophylla S. T. Blake

The components used in the production of substrates influence directly the growth cycle, quality and consequently the cost of production of seedlings. In this experiment we studied the development, quality and cost of Eucalyptus grandis Hill ex Maiden x E. urophylla S. T. Blake, through sexual propagation using 12 compositions of substrate. The results showed that the pure substrates, with the exception of coconut fiber, did not present physical characteristics appropriate for the production from seedlings of eucalyptus in container, with the best results obtained for the substrates with a mixture 1:1 of carbonized rid of rice and coconut-fiber and a mixture 1:1 of vermiculite and coconut fiber, due to the best morphological characteristics and the possibility of reducing the production period which enables a reduction in the cost of final seedling.

Propriedades físicas dos lenhos juvenil e adulto de Pinus elliottii Engelm var. elliottii e de Eucalyptus grandis Hill ex Maiden

The juvenile wood presents great difference in its anatomical and physical properties in relation to the mature wood. That heterogeneity of the wood causes a series of upset for the processing industry. The present research had as objective the study of the physical properties of the juvenile and mature wood of Pinus elliottii Engelm var. elliottii, with 25 years of age and of Eucalyptus grandis Hill ex Maiden, with 30 years of age, coming from the Experimental Station of Itapetininga and State Forest of Santa Barbara, belonging to the Forest Institute of the state of São Paulo. From both species there were taken from radial boards, specimens with dimensions of 20x30x50 mm, for the determination of density, swelling and swelling coefficient of the juvenile and mature wood. The results of the species showed that the mature compared with the juvenile wood presented: (1) an increase in the values of the basic density, at 0% and at 12% of moisture content and of the volumetric, radial and tangential swelling at 12% moisture content and maximum coefficient of radial and tangential swelling; (2) a reduction in the values of longitudinal swelling at 12% and maximum and of the longitudinal swelling coefficient.

Comportamento de adesão da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis proveniente de três condições de manejo

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).

Aporte e decomposição de serapilheira em áreas de cerradão e mata mesofítica na Estação Ecológica de Pirapitinga - MG

This study aimed to quantify the litter and nutrients amount and to estimate the decomposition rate in areas of mesophytic forest and 'Cerradao' in the Ecological Station of Pirapitinga. To evaluate litter and nutrients devolution 10 conic litter traps were randomly distributed in an area 0.1 ha in each area of study, with monthly evaluations. The litter decomposition in the areas of study was evaluated by using litter bags. The total production of litter was 2.50 and 2.92 Mg ha(-1) yr(-1) for mesophytic forest and 'Cerradao' areas, respectively. The nutrients devolution importance order was nitrogen> potassium> phosphorus. The mesophytic forest showed more homogeneous distribution of litter fall over the year and higher values of total annual litter and nutrients, the highest values were observed at the dry season. The half-life decomposition of leaf litter was equivalent between areas, about 161 days in the mesophytic forest area and 173 in 'Cerradao' area.

Propriedades de resistência e rigidez da madeira juvenil e adulta de Pinus taeda L.

O objetivo do presente trabalho foi o estudo da variabilidade das propriedades de resistência e rigidez à flexão estática e à densidade aparente (12%) entre a madeira juvenil e adulta de Pinus taeda L., de 37 anos de idade, procedente do Horto Florestal de Manduri, Estado de São Paulo. Na primeira parte do trabalho foram determinadas a região de madeira juvenil, a região de transição e a região de madeira adulta, por meio de estudos anatômicos (comprimento dos traqueídes axiais), segundo as recomendações das normas ABNT e IAWA. Os resultados mostraram que a região de madeira juvenil dessa espécie ocorre aproximadamente até o 18º anel de crescimento. Na segunda parte do trabalho foram analisados a resistência (módulo de ruptura - MOR) à flexão, o módulo de elasticidade (MOE) nessa mesma solicitação e a densidade aparente (12%) para as madeiras juvenil e adulta. Os resultados mostraram que o MOE e o MOR da madeira juvenil foram menores e mais variáveis que aqueles obtidos para madeira adulta. A densidade apresentou a mesma tendência observada nas propriedades avaliadas no ensaio de flexão estática.

Estresse hídrico em plantio de Eucalyptus grandis vs. Eucalyptus urophylla, em função do solo, substrato e manejo hídrico de viveiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)