Traveling waves in the Lethargic Crab Disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelling the lethargic crab disease.

The lethargic crab disease (LCD) is an emergent infirmity that has decimated native populations of the mangrove land crab (Ucides cordatus, Decapoda: Ocypodidae) along the Brazilian coast. Several potential etiological agents have been linked with LCD, but only in 2005 was it proved that it is caused by an ascomycete fungus. This is the first attempt to develop a mathematical model to describe the epidemiological dynamics of LCD. The model presents four possible scenarios, namely, the trivial equilibrium, the disease-free equilibrium, endemic equilibrium, and limit cycles arising from a Hopf bifurcation. The threshold values depend on the basic reproductive number of crabs and fungi, and on the infection rate. These scenarios depend on both the biological assumptions and the temporal evolution of the disease. Numerical simulations corroborate the analytical results and illustrate the different temporal dynamics of the crab and fungus populations.

Germ Cell Dynamics during the Annual Reproductive Cycle of Dendropsophus minutus (Anura: Hylidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predicting the occurrence of alate aphids in Brassicaceae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tratamento de águas residuárias de suinocultura em reatores anaeróbios de fluxo ascendente com manta de lodo (uasb) em dois estágios seguidos de reator operado em batelada sequencial (RBS)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ciclo reprodutivo do caranguejo violinista Uca rapax (Smith) (Crustacea, Brachyura, Ocypodidae) habitante de um estuário degradado em Paraty, Rio de Janeiro, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características morfogênicas e estruturais do capim-marandu manejado sob pastejo intermitente com diferentes ofertas de forragem

Avaliaram-se as características morfogênicas e estruturais do dossel de Brachiaria brizantha, cv. Marandu, sob pastejo intermitente no período chuvoso, em diferentes ofertas de forragem e ciclos de pastejo. O delineamento experimental foi em blocos ao acaso, em esquema de parcelas subdivididas, com três repetições. Nas parcelas, avaliou-se o efeito das ofertas de forragem (4, 7, 10 e 13% do PV/dia) e, nas subparcelas, o efeito dos ciclos de pastejo. Todas as variáveis diferiram entre os ciclos de pastejo, comprovando grande influência das condições ambientais sobre as características avaliadas. A taxa de alongamento do colmo e a altura do dossel responderam linear e positivamente ao aumento da oferta de forragem. O número de perfilhos vegetativos nos piquetes com a menor oferta permaneceu constante ao longo de todo o período experimental, no entanto, nos piquetes com as demais ofertas, atingiu valores mais elevados nos ciclos intermediários. A densidade de perfilhos reprodutivos e totais ajustou-se ao modelo quadrático de acordo com a oferta de forragem. Pastos manejados com ofertas de forragem próximas a 4% PV/dia têm menor alongamento de colmos e tendem a reduzir as perdas por senescência. As variáveis ambientais exercem maior influência sobre as características morfogênicas e estruturais em comparação a ações de manejo como a oferta de forragem.

Efeitos da rufiação e da manipulação do sistema genital sobre a fertilidade de éguas inseminadas

Estudaram-se os efeitos da rufiação e da manipulação do sistema genital (estocadas) sobre a fertilidade de éguas inseminadas com sêmen fresco (exp. 1) e resfriado/transportado a 14ºC/3,6 horas (exp. 2). No experimento 1 utilizaram-se 42 ciclos de 29 éguas, e no experimento 2, 148 ciclos de 100 éguas, distribuídos aleatoriamente em quatro grupos experimentais definidos por um esquema fatorial 2 x 2, com número desigual de repetições, de acordo com o tipo de rufiação utilizado (éguas rufiadas e não rufiadas) e o tipo de manipulação do sistema genital da fêmea no momento da inseminação (estocadas e não estocadas). Em ambos os experimentos não se observou efeito da estimulação sexual da égua sobre a fertilidade. No experimento 2 não se observou efeito da estimulação sexual sobre a dinâmica de crescimento folicular e ovulação.

Intra-articular pressure profiles of the cadaveric equine fetlock joint in motion

The study of the influence of motion and initial intra-articular pressure (IAP) on intra-articular pressure profiles in equine cadaver metatarsophalangeal (MTP) joints was undertaken as a prelude to in vivo studies, Eleven equine cadaver MTP joints were submitted to 2 motion frequencies of 5 and 10 cycles/min of flexion and extension, simulating the condition of lower and higher (double) rates of passive motion. These frequencies were applied and pressure profiles generated with initial normal intra-articular pressure (-5 mmHg) and subsequently 30 mmHg intra-articular pressure obtained by injection of previously harvested synovial fluid.The 4 trials performed were 1) normal IAP; 5 cyles/min; 2) normal IAP; 10 cycles/min; 3) IAP at 30 mmHg; 5 cycles/min and 4) IAP at 30 mmHg; 10 cycles/min. The range of joint motion applied (mean +/- s.e.) was 67.6 +/- 1.61 degrees with an excursion from 12.2 +/- 1.2 degrees in extension to 56.2 +/- 2.6 degrees in flexion, Mean pressure recorded in mmHg for the first and last min of each trial, respectively, were 1) -5.7 +/- 0.9 and -6.3 +/- 1.1; 2) -5.3 +/- 1.1 and -6.2 +/- 1.1; 3) 58.8 +/- 8.0 and 42.3 +/- 7.2; 4) 56.6 +/- 3.7 and 40.3 +/- 4.6. Statistical analyses showed a trend for difference between the values for the first and last minute in trial 3 (0.05>P<0.1) with P = 0.1 and significant difference (P = 0.02) between the mean IAP of the first and last min in trial 4. The loss of intra-articular pressure associated with time and motion was 10.5, 16.9, 28.1 and 28.9% for trials 1-4, respectively. As initial intraarticular pressure and motion increased, the percent loss of intra-articular pressure increased.The angle of lowest pressure was 12.2 +/- 1.2 (mean +/- s.e.) in extension in trials 1 and 2, In trials 3 and 4, the lowest pressures were obtained in flexion with the joints at 18.5 +/- 2.0 degrees (mean +/- s.e.). This demonstrated that the joint angle of least pressure changed as the initial intra-articular pressure changed and there would not be a single angle of least pressure for a given joint.The volume of synovial fluid recovered from the MTP joints in trial 3 compared to 4 (trials in which fluid was injected to attain IAP of 30 mmHg) was not significantly different, supporting a soft tissue compliance change as a cause for the significant loss of intra-articular pressure during the 15 min of trial 4.The pressure profiles generated correlate well with in vivo values and demonstrated consistent pressure profiles. Our conclusions are summarised as follows:1. Clinically normal equine MTP joints which were frozen and then later thawed were found to have mostly negative baseline intra-articular pressures, as would be expected in living subjects,2. Alternate pressure profiles of the dorsal and plantar pouch at baseline intra-articular pressure document the presence of pressure forces that would support 'back and forth' fluid movement between joint compartments. This should result in movement of joint fluid during motion, assisting in lubrication and nutrition of articular cartilage,3. If joint pressure was initially greater than normal (30 mmHg), as occurs in diseased equine MTP joints, joint motion further increased joint capsule relaxation (compliance) and, therefore, reduced intra-articular pressure.4. Peak intra-articular pressures reached extremely high values (often >100 mmHg) in flexion when initial pressure was 30 mmHg. Joint effusion pressures recorded for clinical MCP joints are frequently 30 mmHg. These IAP values are expected to produce intermittent synovial ischaemia in clinical cases during joint flexion.5, Additional in vivo studies are necessary to confirm our conclusions from this study and to identify the contributions of fluid absorption and the presence of ischaemia in a vascularised joint.

Singular perturbation problems for time-reversible systems

In this paper singularly perturbed reversible vector fields defined in R-n without normal hyperbolicity conditions are discussed. The main results give conditions for the existence of infinitely many periodic orbits and heteroclinic cycles converging to singular orbits with respect to the Hausdorff distance.

Não-preferência para alimentação de traça-das-crucíferas por genótipos de couve-flor

The feeding nonpreference of Plutella xylostella (L.) larvae was tested in regard to the cauliflower genotypes Barcelona, Verona, Piracicaba Precoce, Sharon, Silver Streak (hybrids) and Teresopolis Gigante (cultivar). Choice and no-choice tests were carried out at the laboratories of the Departamento de Fitossanidade, FCAV/UNESP, Jaboticabal, state of São Paulo, Brazil, to study attractiveness and dry mass consumption by 1st-instar (just hatched) and 4th-instar larvae for 24 hours. No significant difference was found for attractiveness in choice and no-choice tests, for both 1st-and 4th-instar larvae. The consumption of dry mass in both tests, with 1st-and 4th-instar larvae, showed a significant difference between genotypes only for 1st-instar larvae, the hybrid Silver Streak being the most consumed (3.72 mg) by P. xylostella larvae. The cauliflower genotypes tested presented no variation in attractiveness for 1st-instar (just hatched) and 4th-instar larvae and did not present nonpreference feeding resistance for P. xylostella larvae.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte I.

The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.

Relative growth of the mangrove crab Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ocypodidae) at Iguape, São Paulo, Brazil

A total of 2,130 individuals of Ucides cordatus (1,255 males and 875 females) were captured in a mangrove forest at Iguape, São Paulo, Brazil. For each crab, the following body structures were measured: carapace (width = CW; length = CL; depth = CD), 5th abdominal somite (AW), major chelar propodus (length = PL; width = PW; depth = PD), and 1st and 2 nd gonopod pairs (length = GL1 and GL2). The Student t and Snedecor F tests were used to verify any changes in growth allometric rates during ontogeny. The relationships CLxCW, PLxCW (for both sexes), GL1xCW and GL2xCW (males) and AWxCW (females), showed a better fit by two equations for the juvenile and adult phases (p<0.01). The inflexion point size between regression lines, indicated by each morphometric relationship, allowed to propose four morphotypes for U. cordatus. Males were classified in juvenile (CW le; 32 mm), pre-puberty (32 ≤ CW ≤ 51 mm), sub-adult (51 ≤ CW ≤ 59 mm) and adult (CW > 59 mm). Females showed a similar size interval: (juvenile CW ≤ 39 mm, pre-puberty 39 ≤ CW ≤ 53 mm, sub-adult 53 ≤ CW ≤ 58 mm, adult CW > 58 mm).

Uso antenatal de corticosteóide e evolução clínica de recém-nascidos pré-termo

Objectives: To describe the use of antenatal corticosteroid and clinical evolution of preterm babies. Methods: An observational prospective cohort study was carried out. All 463 pregnant women and their 514 newborn babies with gestational age ranging from 23 to 34 weeks, born at the Brazilian Neonatal Research Network units, were evaluated from August 1 to December 31, 2001. The data were obtained through maternal interview, analysis of medical records, and follow-up of the newborn infants. Data analysis was performed with the use of chi-square, t Student, Mann-Whitney, and ANOVA tests and multiple logistic regression, with level of significance set at 5%. Results: Treatment was directly associated with the number of prenatal visits, with maternal hypertension and with the antenatal use of tocolytic agents. Babies from treated pregnant women presented better Apgar scores at the 1st and 5th minute, reduced need for intervention in the delivery room and lower SNAPPE II. They were born with higher birth weight, longer gestational age and needed less surfactant use, ventilation, and oxygenation time. After multiple logistic regression, the use of antenatal corticosteroid independently improved birth conditions, decreased ventilation time, being related to increased occurrence of neonatal sepsis. Conclusions: The use of corticosteroid was associated with better prenatal care and birth conditions, better preterm evolution but higher risk of infection. © 2007 Sociedad Chilena de Pediatría.

Influence of surface sealants on microleakage of composite resin restorations

Purpose: The purpose of this study was to verify the influence of surface sealants and dentin adhesive systems on the microleakage of composite restorations. Methods: Class V cavities were made on the buccal faces of 100 permanent third molars and restored with Z250. After 24 hours, they were submitted to polishing and finishing processes. The teeth were divided into groups according to the sealant agent: group 1 - Single Bond; group 2 - Opti Bond Solo Plus; group 3 - Fortify; group 4 - Fortify Plus; and group 5 - control without sealant. The analysis of immediate microleakage was performed in 10 restorations from each group, soon after the sealing. The other 10 specimens from each group were submitted to tooth-brushing and thermal cycles. The teeth were isolated and immersed in 2% methylene blue solution, washed in tap water, and sectioned in the buccolingual direction. The percentage of marginal leakage was calculated using an image analysis program, and results were submitted to analysis of variance and Tukey's test. Results: All the sealed groups demonstrated lower microleakage values compared to the control group. Group 3, sealed with Fortify, presented the lowest mean microleakage values. Conclusion: The application of surface sealants effectively decreased the microleakage in composite resin restorations.