134 resultados para teor??a
Resumo:
Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Pós-graduação em Química - IQ
Resumo:
Pós-graduação em Engenharia Elétrica - FEB
Resumo:
The aim of this study was to evaluate the effect of different carbohydrate sources associated with sunflower oil on intake, digestibility of nutrients and nitrogen balance in diets of lambs. Twenty lambs were used, assigned in a completely randomized design with a 2 x 2 factorial arrangement of treatments with two sources of neutral detergent soluble carbohydrate, starch and neutral detergent soluble fiber, with and without the inclusion of 4.2% sunflower oil. The dry matter intake was not affected by carbohydrate sources and the inclusion of oil. Diets with a high percentage of starch provided higher digestibility of dry matter, starch and ether extract. The different sources of carbohydrates had no interference on digestibility of organic matter, crude protein, neutral detergent soluble fiber, nonfiber carbohydrates, neutral detergent fiber, hemicellulose and acid detergent fiber. The addition of oil in the diets increased the digestibility of ether extract. The combination of 4.2% oil in the diet high in soluble neutral detergent fiber had no influence on the nutrient digestibility, otherwise, the addition of oil at high starch diet caused a significant reduction in the digestibility of organic matter, neutral detergent fiber, hemicellulose and nonfiber carbohydrates. The quantities of nitrogen intake, absorbed and retained, did not differ as sources of carbohydrates and oil inclusion in the diet. The association of 4.2 % sunflower oil to the different sources of carbohydrates in the diet does not affect consumption and nitrogen metabolism in lambs. The addition of 4.2 % oil in the diet with high starch (28% of DM diet) promotes reduction in digestibility of organic matter, of fibrous and nonfibrous carbohydrate in the diet.
Resumo:
O sucesso do desenvolvimento da dinâmica das formações vegetais depende das relações estabelecidas entre as espécies vegetais com outros organismos e com o meio físico. Tais relações estão sujeitas a situações de estresse, podendo esse ser de caráter abiótico, como condições elevadas de radiação solar e temperatura e déficit hídrico ou de caráter biótico, como a herbivoria e o ataque de patógenos. Dessa maneira, em virtude à necessidade de um sistema de defesa, as plantas utilizam compostos químicos, como compostos fenólicos e ligninas, para se desenvolverem com proteção. Os compostos fenólicos são compostos oriundos do metabolismo secundário vegetal e ocorrem na parede celular dos tecidos vegetais, constituindo assim uma rápida linha de defesa vegetal a lesões e infecções e funcionando como substrato para atuação de enzimas de defesa como peroxidases e polifenoloxidases. Junto com a atuação dos compostos fenólicos, as ligninas fornecem à planta maior resistência mecânica e impermeabilidade suficiente aos vasos condutores do xilema, proporcionando, assim, desde um fundamental auxílio aos vegetais na conquista do ambiente terrestre até o estabelecimento de uma barreira protetora eficiente contra o ataque de microorganismos. Assim, por meio da extração e análise dos teores de compostos fenólicos e de ligninas de porção de raiz, caule, ápice caulinar e folhas maduras e imaturas de indivíduos de Erythrina speciosa Andrews, Eugenia uniflora L., Hevea brasiliensis M. Arg., Hymenaea courbaril L. var. stilbocarpa (Hayne) Lee et Lang, Joannesia princeps Vell., Lecythis pisonis Cambess, Licania tomentosa (Benth.) Fritsch, Pachira aquatica Aubl. e Psidium guajava L., classificou-se como espécies pioneiras Erythrina speciosa Andrews, Hymenaea courbaril L. var. stilbocarpa (Hayne) Lee et Lang, Joannesia princeps Vell., Pachira aquatica Aubl... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
The process of sanding wood is little known and industries use it in a practical way without having studied their best conditions before. There are few studies involving this type of machining. On this basis, this paper studied the effects of varying moisture content of the wood surface quality after the sanding process. It was used a sanding machine with flat horizontal cut parallel to the fibers, using: 02 different species (Pinus elliottii and Corymbia citriodora); 01 sanding abrasive (aluminum oxide) and 03 different particle size abrasives ( P80 , P100 and P120 ) . Initially, the pieces were acclimatized ( 2 ± 7% , 12% and 17% ± 2 ± 2 ) and subsequently passed by the sanding process, and therefore, the surface roughness was analyzed. For each condition, were performed 06 repetitions totaling 54 trials for each species. We analyzed the effects of wood moisture by capturing the power sanding, rougheness, acoustic emission and maximum temperature during the sanding process. The variation of moisture content produced changes in the surface quality of the finished parts, and these changes were more marked in Pinus than Corymbia. During the sanding process of the specimens with 7 % and 12 % humidity, there was a lower noise emission, power consumption and heating surface. When checking the roughness of these parts after this process, it was observed that the surface quality of them were superior in the parts sanded containing 17 % moisture
Resumo:
The soybean crop is considered a high expression around the world. In plant breeding programs, knowledge of genetic diversity is extremely important and in this context, are frequently used multivariate analyzes. Thus, the aim of the present study was to evaluate the genetic divergence between soybean crosses through multivariate techniques. In total, 16 crosses were evaluated, which were in the F2 generation of inbreeding. The evaluated characteristics were plant height at maturity, height of the first pod, number of branches per plant, number of pods per plant, number of nodes per plant, hundred seed weight, grain yield and oil content. For the analyzes was used Euclidean distance, methods of hierarchical clustering UPGMA and Ward and principal component analysis. Genetic distances estimated using Euclidean distance ranged from 1.24 to 8.13, with the smallest distance observed between crosses C1 and C4, and the greatest distance between the C2 crosses and C6. The methods UPGMA clustering and Ward met crossings in five different groups. The principal component analysis explained 86.2% of the variance contained in the original eight variables with three main components. The APM characters, NV, NR, NN, PG% and oil were the main contributors to genetic divergence among traits. Multivariate techniques were crucial to the analysis of genetic diversity, and the methods of Ward and UPGMA clustering and principal components have consistent results in this way, the simultaneous use of these tools in genetic analysis of crosses is indicated
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The Prato cheese is the second most consumed cheese in Brazil. It is produced by milk enzymatic coagulation, and maturated for at least 25 days; it is classified as fatty cheese and of medium moisture. Due to the concern to health, the cheeses consumers have been seeking for products with low fat contents; however fat is essential for providing desirable sensory and physiologic characteristics, such as flavor, softness and texture to cheeses. Alterations on the technological processing of low fat cheeses have been made seeking for improved products, and the use of proteolytic enzymes has been a significant strategy. The meltability, color and sensory characteristics are fundamental quality indicators of the final products. This study reports the findings from the analyses on the physical and sensory characteristics of low fat Prato cheese with addition of proteolytic enzyme – fastuosain, that is extracted from unripe gravata fruit. The addition of fastuosain improved the quality of the product, as this additive neither affected the meltability, nor produced bitterness, which is a common unpleasant taste in low fat cheeses.
Resumo:
The determination of foliar chlorophyll content is a characteristic that interests ecophysiologists and rural producers. With consideration for practical uses as well as scientific publications, our present work aims to establish equations, for rubber tree leaves, that can convert arbitrary units of expressing chlorophyll content to the international system. Chlorophyll a (Chla), chlorophyll b (Chlb), and total chlorophyll (Chltot) were obtained from intact leaves using a portable chlorophyll detecting instrument. Leaves from different positions on the plant, at various stages of maturity, and representing a large spectrum of pigment concentrations, were collected and analyzed in the field using the Clorofil OG Falkner ® instrument, through four evaluations in forty-five medium leaflets. At the laboratory, leaflets underwent a process of pigment extraction. They were incubated in a water-bath with dimethylsulfoxide (DMSO), dosed in molecular absorption spectrophotometer, and converted into pigment content per unit of fresh weight using conventional equations. The data were evaluated according to the Pearson correlation coefficient and tested with different regression models. For all variables, the linear fit is the most adequate, with correlation coefficients (r) 0.74 for Chlb and 0.88 for Chla and Chltott.
Resumo:
The determination of foliar chlorophyll content is a characteristic that interests ecophysiologists and rural producers. With consideration for practical uses as well as scientific publications, our present work aims to establish equations, for rubber tree leaves, that can convert arbitrary units of expressing chlorophyll content to the international system. Chlorophyll a (Chla), chlorophyll b (Chlb), and total chlorophyll (Chltot) were obtained from intact leaves using a portable chlorophyll detecting instrument. Leaves from different positions on the plant, at various stages of maturity, and representing a large spectrum of pigment concentrations, were collected and analyzed in the field using the Clorofil OG Falkner ® instrument, through four evaluations in forty-five medium leaflets. At the laboratory, leaflets underwent a process of pigment extraction. They were incubated in a water-bath with dimethylsulfoxide (DMSO), dosed in molecular absorption spectrophotometer, and converted into pigment content per unit of fresh weight using conventional equations. The data were evaluated according to the Pearson correlation coefficient and tested with different regression models. For all variables, the linear fit is the most adequate, with correlation coefficients (r) 0.74 for Chlb and 0.88 for Chla and Chltott .
Resumo:
Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV
Resumo:
Pós-graduação em Agronomia (Ciência do Solo) - FCAV
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA