Desenvolvimento de microrganismos e valor nutritivo de silagens de capim-Tifton 85

Pós-graduação em Zootecnia - FCAV

Processo de fabricação de selador endodôntico rápido e produto obtido

Processo de fabricação de selador endodôntico rápido e produto obtido formado por clinquer, inicialmente na forma de pelotas, e transformado em pó utilizando-se almofariz e pistilo ou moinho de bolas, sendo que, posteriormente o pó é peneirado, utilizando-se peneiras de mesh variando entre 200 e 400, de maneira que o pó de sulfato de bário ou de óxido de bismuto também passam pelo mesmo processo, de forma que, após o processo de pulverização e controle de tamanho de partículas, adiciona-se o radiopacificador ao pó clinquer na proporção que pode variar entre 10% a 30% em massa, sendo que, na preparação da emulsão, o carboximetil celulose (CMC) é misturado em água destilada na proporção para cada 100ml de água pode-se proporcionar entre 200 e 800 mg de CMC...

The effect of exogenous fibrolytic enzymes and a ferulic acid esterase-producing inoculant on the fibre degradability, chemical composition and conservation characteristics of alfalfa silage

The objective of this study was to determine the effect of applying fibrolytic enzymes at ensiling, either alone or in combination with a ferulic acid esterase-producing bacterial silage inoculant, on the silage conservation characteristics and nutritive value of alfalfa (Medicago sativa L). Second-cut alfalfa (340 g DM/kg fresh crop) was harvested, wilted, chopped and sub-sampled into 24 batches. Samples were randomly allocated in triplicate to one of four enzyme product treatments supplying endoglucanases and xylanases: none (control), EN1, EN2, EN3; applied alone or in combination with a ferulic acid esterase-producing silage inoculant (FAEI). Treatments were arranged in a 4 x 2 factorial design. All enzyme treatments were applied at 2 ml enzyme product/kg herbage DM, and inoculant was applied at 1 x 10(5) cfu/g fresh herbage. Samples were packed into laboratory-scale silos and stored for 7, 27 or 70 days, and analysed for dry matter (DM) losses, aerobic stability, chemical composition and in vitro ruminal degradability. The use of enzymes did not affect (P>0.05) ensilage DM losses or lactic or acetic acid concentrations after 70 days of ensilage, compared to the control silage. Silage produced using EN1 had lesser neutral detergent fibre (aNDF, P=0.046) and acid detergent fibre (ADF; P=0.006) concentrations than control silage. However, no difference (P>0.05) was observed between the control silage and silage produced with EN1 for aNDF or ADF degradability (NDFD, ADFD). Silages produced with FAEI had greater DM losses (P=0.017) and pH (P<0.001) and lesser NDFD (P=0.019), ADFD (P=0.010) and proportion of lactic acid in the total fermentation products (P=0.006) after 70 days of ensilage, compared to uninoculated silages. The use of fibrolytic enzymes did not have a major effect on the ensilage fermentation of alfalfa, either ensiled alone or with an inoculant. No advantage in ruminal DM or fibre degradability was observed for silages produced with fibrolytic enzymes. The use of a ferulic acid esterase-producing inoculant alone did not improve the nutritive value of alfalfa silage, and did not promote any incremental effects when applied in combination with fibrolytic enzyme products. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.

Rehydration of corn grain with acid whey improves the silage quality

Our objective was to investigate the effects of rehydration with acid whey or water at three moisture levels, as well as the effects of bacterial inoculation, on the fermentation, chemical composition and aerobic stability of corn grain silages. The trial was conducted in a completely randomized design with four replicates in a factorial arrangement as follows: 3 (rehydration with three different moisture levels: 300,350 and 400 mL/kg of corn grain)x 2 (silage inoculated with bacteria or not inoculated (control))x 2 (liquid used in the rehydration: acid whey or water). Overall, corn grain silages rehydrated with acid whey produced more lactic acid than the silages rehydrated with water (13.8 vs. 12.6 g/kg of dry matter (DM), respectively). In addition, increases in the rehydration of corn grain silages promoted decreases (linear) in lactic acid concentration as well as in production of total acids. Although inoculated silages had higher pH as consequence of the rehydration using water at the three levels, these treatments presented high DM recovery. In general, neutral detergent fiber (aNDFom) decreased if inoculant was applied in corn grain silages rehydrated with acid whey. After silos opening, silages rehydrated with 350 or 400 mL/kg (independent of the liquid) had lower aerobic stability than silages rehydrated with 300 mL/kg. Overall, we found that the inoculant did not promote significant changes in the composition of the corn grain silage. In contrast, the potential of the use of acid whey in ensiling corn grain is high, as its addition leads to improvements in the fermentation process and aerobic stability of the silages. (C) 2014 Elsevier B.V. All rights reserved.

What is the best additive to use at the ensiling of sugarcane SP81-3250?

Our objective was to determine the best additive to use for the ensiling of sugarcane SP81-3250 based on the nutritional properties and aerobic stability of the silages. The additives evaluated were (1) and (2): salt (NaCl) at rates of 1.0 or 2.0 kg/100 kg fresh sugarcane (as-is basis), respectively; (3) and (4): quicklime (CaO) at rates of 1.0 or 2.0 kg/100 kg fresh sugarcane, respectively; (5) and (6): commercial inoculants Silobac (R) and Maize All (R); and a control treatment. The addition of quicklime reduced the NDF and ADF contents of the silages by 11% compared with the control treatment, but did not increase the digestibility. On the other hand, after 24 h of in vitro fermentation, the application of 1.0 and 2.0% salt reduced the gas production by 34.15 and 33.55 mL/g OM, respectively, and the IVOMD was reduced 5.74 and 5.90%, respectively, compared with the untreated silage. Moreover, the addition of quicklime elevated the pH of the sugarcane silages, with a trend towards an increase in the DM recovery. In contrast, the bacterial inoculants did not alter the pH values, but there was an upward trend for a DM recovery. After the silos were opened, the silages that were treated with salt (independent of the dose) and 1.0% quicklime exhibited greater stability. We recommend applying 1.0 kg of quicklime to each 100 kg of sugarcane at the time of ensiling to improve the nutritional characteristics of sugarcane silage variety SP81-3250.

Valor nutricional de silagem de capim-mombaça com aditivos agroindustriais

It was aimed to evaluate the chemical composition of grass silage-mombasa associated with different additives in four times of opening the silo. The experiment was conducted in UFGD. After harvesting the forage, biomass in natura crushed, was taken to the lab, homogenized and enriched on the basis of natural mass, with the following additives: 5% wheat bran, 5% of waste (broken grain and soy ice cream cone) of soybean, 5% urea in natural matter and the witness (without additive). The silos were opened after (unprocessed material), 15, 30 and 45 days, for the analysis of chemical composition. The data obtained were analyzed through the statistical programme SISVAR and averages were compared to 5% of probability, by Skott-Knot. The grass silage-mombasa without additive presented major (P<0.05) dry matter content compared to other treatments at time 0 and 30 days of silage and did not differ (P>0.05) of grass silage- mombasa associated with 5 of urea in 15 days and 45 of silage. The grass silage-mombasa with 5% urea showed the highest crude protein content at time 0 and differed from other treatments. The silage of mombasa associated with 5% urea provided greater in vitro digestibility of dry matter to 15 days of silage.

Efeito do tamanho de partícula na ensilabilidade e no valor nutritivo de silagens de cana-de-açúcar para bovinos de corte

Pós-graduação em Zootecnia - FCAV

Degradabilidade e digestibilidade de híbridos de milho em função do estádio de colheita, tamanho de partícula e processamento por meio do esmagamento na ensilagem

During the process of silage corn, should take into consideration some aspects that will result in better utilization. The aim of this study was to evaluate the degradability of dry matter (DM), crude protein (CP), neutral detergent fiber (NDF) and starch digestibility and in vitro dry matter (DM) of silage corn hybrids due two textures, three stages of harvest, three particle sizes and processing by crushing. After harvesting and chipping, part of the material was crushed and then ensiled and sealed for 45 days. After opening the silos, analyzed the degradability in the incubation time of 20 hours using the technique in situ macro bag. The experimental design was a randomized split plot. The DM degradability was influenced only by the effect of stages of sampling used. The degradability of CP showed interaction between processing and particle size (Tp), noting that increased degradation due to processing. For NDF degradation significant interaction of factors, hybrid and processing, similar to the degradation of starch. The IVDMD was influenced by the effects of hybrid, stadium, Tp and processing. It can be concluded that benefits were higher with the use of processing associated with more advanced stages of harvest, in larger particle sizes.

Laser frequency measurements and spectroscopic assignments of optically pumped 13CH3OH

A three-laser heterodyne system was used to measure the frequencies of twelve optically pumped laser emissions from 13CH3OH in the far-infrared (FIR) region. These emissions, ranging from 54 to 142 μm, are reported with fractional uncertainties up to ±2 × 10-7 along with their polarization relative to the CO2 pump. Using the 9P32 and 10R14 CO2 lines, complete spectroscopic assignments for two laser systems were confirmed.

Chemical and bromatological characteristics of elephant grass silages with the addition of dried cashew stalk

Este trabalho foi conduzido para avaliar o valor nutritivo de silagens de capim-elefante (Pennisetum purpureum, Schum.) com 0, 4, 8, 12 e 16% de pedúnculo de caju (Anacardium occidentale L.) desidratado, com base na matéria natural. Utilizou-se o delineamento inteiramente casualizado com quatro repetições. Como silos experimentais, foram utilizados tambores plásticos de 210 L. Determinaram-se a composição nutricional, os valores de pH e os teores de nitrogênio amoniacal, ácido lático, acético, propiônico e butírico. A inclusão de pedúnculo de caju desidratado na ensilagem de capim-elefante promoveu aumento das concentrações de matéria seca (MS), proteína bruta (PB), extrato etéreo (EE), carboidratos não-fibrosos (CNF), nitrogênio insolúvel em detergente neutro (NIDN, % do N total), nitrogênio insolúvel em detergente ácido (NIDA, % do N total), pH e ácidos lático e propiônico. Por outro lado, os teores de FDN, FDA, hemicelulose, N-NH3 (% do N total) e ácido butírico diminuíram de forma linear conforme aumentaram os níveis do subproduto na ensilagem. O pedúnculo de caju desidratado não influenciou os teores de carboidratos totais e ácido acético das silagens. Esse subproduto pode ser ensilado com o capim-elefante até o nível de 16%, uma vez que aumenta os teores de PB e CNF e reduz os teores de FDN e FDA, melhorando o padrão de fermentação das silagens.

Effect of trimetaphosphate and fluoride association on hydroxyapatite dissolution and precipitation in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Frequency measurements of CD3OH and (CH3OH)-C-13 optically pumped far-infrared laser lines

We report the frequency measurements of 18 optically pumped far-infrared (FIR) laser lines generated from CD3OH and (CH3OH)-C-13. We use the heterodyne technique of mixing FIR laser radiations and microwave radiation on a metal-insulator-metal point-contact tunnel diode to determine the FIR laser frequencies. Two FIR laser systems, consisting of CO2 waveguide pump lasers and Fabry-Perot FIR laser cavities, were used as optical sources. (C) 1997 Optical Society of America.

Vibrational and rotational spectroscopy of (CD3OD)-C-13

We have used Fourier Transform spectral data on the C-O stretching mode of (CD3OD)-C-13 in order to perform a vibro-rotational analysis for this molecule. We have estimated a few molecular parameters of the ground and C-O stretching vibrational modes. Based on these parameters, and by using the Kwan-Dennison model, we propose assignments for a number of far-infrared laser transitions of (CD3OD)-C-13.

Analysis of simple hardware efficiency for temperature measurement in agriculture and environment

This work focuses basically on the design and analysis of simple and low cost hardware systems efficiency for temperature measurement in agricultural area. The main objective is to prove quantitatively, through statistical data analysis, to what extent a simple hardware designed with inexpensive components can be used safely in the indoor temperature measurement in farm buildings, such as greenhouses, warehouse or silos. To verify the of simple hardware efficiency, its data were compared with data from measurements with a high performance LabVIEW platform. This work proved that a simple hardware based on a microcontroller and the LM35 sensor can perform well. It presented a good accuracy but a relatively low precision that can be improved when performed some consecutive signal sampling and then used its average value. Although there are many papers that explain these components, this work has the distinction of presenting a data analysis in numerical form and using high performance systems to ensure critical data comparison.