Avaliação das condições de contorno da teoria de Hertz, comparando os resultados analíticos e numéricos a partir de simulações em software de elementos finitos

The objective of this study was to present the comparison between analytical and numerical results trying to identify the differences and behaviors of the variation of the principal stresses and the maximum contact pressure for different model configurations. The analytical equations of the theory of Hertz from the boundary conditions adopted by him were differences are shown. A step-by-step of developing the model indicating the geometric dimensions, surface contact, type of contact, the formulation used by the software, type of mesh, as well as the boundary conditions and load was presented. In the results, the stresses calculated analytically and compared with the stresses obtained by the finite element simulation software indicating the changes have been made

Técnicas construtivas e procedimentos sustentáveis – estudo de caso: edifício na cidade de São Paulo

The environmental problems generated by construction activity have been widely discussed in Brazil, which has begun to incorporate sustainable building techniques in your ventures. Based on these facts, this work focused on addressing the main characteristics of a sustainable building project. Among them are water conservation, energy efficiency in buildings, managing a construction site with little environmental impact and reuse of materials and construction elements. This work, after the presentation of the main characteristics of a sustainable building project, shows a case study about the implementation of environmental certification LEED Gold level in a large building, located in São Paulo - SP, Brazil. With that, we want to produce a research document about the topic of sustainable buildings

Métodos analíticos para a identificação de espécies animais

The food industry has been rapidly modernized, and with this the disposal and the consumption of industrialized food has been increasing continually. These products lose their original morphological characteristics, requiring fast and reliable tests that could help to identify the species in question, as most fraudulent behavior in the milk and dairy industry (meat and fish) is carried out where there is partial or total exchange of the original material for other with less value at market. Nowadays there is a lot of techniques that can be used for the identification of animal species, based on muscle protein, or DNA analysis. In the case of protein based analysis, we can mention several types of electrophoresis and immunologic methods, as ELISA. In the case of DNA based methods, we have several assays that use the amplification of DNA fragments, known as PCR, as proof. All these techniques have advantages and disadvantages that can be affected by factors- the sample condition, or the degree of relation between the species in question. Because of this, it’s necessary that a continuous study looking for the improvement of the available techniques, making sure that the confirmation of food authenticity is in place. This is to ensure the true product value, to comply with labeling regulationand and protect the consumer of frauds

Uso do método de Monte Carlo para simulação e detecção do espectro de raios-X gerado com feixes de elétrons em alvo de Molibdênio, utilizando o Geant4

The huge demand for procedures involving ionizing radiation promotes the need for safe methods of experimentation considering the danger of their biological e ects with consequent risk to humans. Brazilian's legislation prohibits experiments involving this type of radiation in humans through Decree 453 of Ministry of Health with determines that such procedures comply with the principles of justi cation, optimization and dose limitation. In this line, concurrently with the advancement of available computer processing power, computing simulations have become relevant in those situations where experimental procedures are too cost or impractical. The Monte Carlo method, created along the Manhattan Project duringWorldWar II, is a powerful strategy to simulations in computational physics. In medical physics, this technique has been extensively used with applications in diagnostics and cancer treatment. The objective of this work is to simulate the production and detection of X-rays for the energy range of diagnostic radiology, for molybdenum target, using the Geant4 toolkit. X-ray tubes with this kind of target material are used in diagnostic radiology, speci cally in mammography, one of the most used techniques for screening of breast cancer in women. During the simulations, we used di erent models for bremsstrahlung available in physical models for low energy, in situations already covered by the literature in earlier versions of Geant4. Our results show that although the physical situations seems qualitatively adequate, quantitative comparisons to available analytical data shows aws in the code of Geant4 Low Energy source

Monitoramento da Qualidade do leite: Procedimentos Diagnósticos

Means for milk, not otherwise specified, the product from complete and uninterrupted milking , in a hygienic, healthy cows, well fed and rested. The milk of other animals must be called according to origin of species. One of the main characteristics that defined the milk is the set of their sensory characteristics, and the main flavor. The control of milk quality in Brazil has been an important factor for the consolidation of the entire production chain, passing necessarily by the dairy industry. The production of milk with good quality guarantees, of course, food safety for consumers. The measures to obtain milk begin on the property, in carrying out correct procedures for milking, storage and transportation of the product also in the dairy. Later, in the laboratory evaluation of physicochemical properties, research fraud, and microbiological examinations. Finally, measures of health education are need for producers to become aware of the economic benefits by obtaining a better quality milk. The objective of this review is to emphasize the importance of using diagnostic procedures methods for the control of mastitis and consequently obtain better Milk quality

Otimização de procedimentos de controle de qualidade em equipamentos radiográficos convencionais do Instituto de Eletrotécnica e Energia - USP

Radiography is currently an important method of diagnosis, both medical, dental and veterinary. The image in this type of survey is obtained using an X-ray beam, where the radiologist can possibly view structures of interest. It isn't always possible to get the desired images due to various factors, such as equipment limitations. The Administrative Law 453/98, the State Resolution SS 625/94, and other standards require testing and quality control acceptance limits that guarantee a good performance of the equipment for the security and quality of care, giving service users greater effectiveness in exams. This study were performed in the accompaniment of testing procedures for quality control established by Administrative Law 453/98 in several X-ray equipment to make a comparison and optimization in the descriptions of the procedures used by the Institute for Electrical Energy and the University of São Paulo (IEE / USP / SP).The optimization of the procedures were performed with the aid of a current literature, the Resolution 453/98, State Resolution SS 625/94 and other international standards. On this basis it was possible to observe the importance of regular monitoring of tests for an update, following the technological development of instruments used in the service

Desenvolvimento de métodos analíticos para determinação de fósforo e selênio em amostras biológicas

A determinação de fósforo em amostras de rações e fezes de peixes por espectrometria no visível e de selênio em amostras vegetais de cultura orgânica por espectrometria de absorção atômica em forno de grafite (GFAAS) representa o foco principal do trabalho desenvolvido. O fósforo e o selênio são macro e micronutrientes importantes para a nutrição vegetal e animal, no entanto, se utilizados sem um controle adequado podem poluir o solo e os recursos hídricos, atingindo todo o meio ambiente. Dessa forma, foram desenvolvidos métodos para extração dos analitos que diminuíram significativamente os resíduos químicos produzidos nas determinações de rotina feitas na área de nutrição de plantas e de piscicultura. No caso do fósforo foram otimizados parâmetros físico-químicos para extração desse elemento por ultra-som e posterior quantificação por espectrofotometria no visível. No caso do selênio foram otimizados parâmetros físico-químicos para amostragem em suspensão (slurry) e determinação direta por GFAAS. Os principais parâmetros físico-químicos avaliados e otimizados foram: granulometria da amostra sólida, tempo e potência de sonificação, soluções extratoras, agentes surfactantes para estabilização do slurry; temperatura de pirólise e atomização, tipos de modificadores químicos e volume de amostragem nas determinações de selênio por GFAAS e tempo de reação e relação ao agente cromogênico/volume de amostra nas determinações espectrofotométricas de fósforo. O método de extração por ultra-som foi aplicado na determinação de fósforo biodisponível em amostras de rações de peixes e o método de amostragem em suspensão para a determinação de selênio em amostras de vegetais orgânicos

Caracterização da fauna recebida e avaliação dos procedimentos em Centros de Triagem de Animais Silvestres (CETAS)

Estima-se que anualmente, em função do tráfico de animais silvestres, cerca de 12 milhões de espécimes sejam retirados de nossas florestas, sendo que apenas uma ínfima porcentagem de indivíduos é recuperada e destinada à soltura com o devido rigor técnico. O tráfico de animais silvestres constitui um dos fatores mais relevantes da destruição da fauna, acarretando em um desequilíbrio na estruturação e manutenção dos ecossistemas. Este comércio ilegal constituise o terceiro maior do mundo, perdendo apenas para o tráfico de narcóticos e armas. Assim, para otimizar o processo de soltura da fauna como estratégia para conservação de espécies torna-se necessário uma análise quantitativa e qualitativa da fauna atendida e dos procedimentos realizados nos Centros de Triagem de Animais Silvestres (CETAS). Nesse sentido, o presente trabalho teve como objetivo fazer uma caracterização da fauna recebida e uma avaliação dos procedimentos realizados em dois CETAS, além de discutir sobre a importância desse órgão na triagem, reabilitação e conservação de animais silvestres. O presente estudo é justificado pela escassez de informações sobre a fauna retirada da natureza. Estas são necessárias para servir de base científica para a adoção de políticas públicas para o combate ao tráfico de animais silvestres; elaborar um programa de fauna que contemple a triagem e destinação adequada e contribuir para o desenvolvimento de trabalhos educativos com o fim de esclarecimento da sociedade. Foram analisados o “Livro de Registro” do CETAS da Fundação Animália e o “Livro de Plantão” do CETAS DEPAVE – 3, bem como os “Relatórios CETAS” que esses dois Centros enviaram ao IBAMA. O período escolhido foi do ano de 2003 a 2008. Os dados foram compilados e organizados em planilhas do Microsoft Office Excel e foram elaborados tabelas e gráficos para análise dos resultados.

Análise dos procedimentos metodológicos de dimensionamento e execução de parede diafragma

The present paper conducts an analysis of all steps for the construction of diaphragm walls, from obtaining the soil parameters until its execution. Construction stages of diaphragm wall are detailed. The paper presents a detailed analysis of the main available calculation methods to obtain the soil parameters and the design of the diaphragm wall. A case history extensively documented in previous research and present in international symposiums was chosen for an analysis of construction process and excavation’s instrumentations, as well as emphasizing the importance of temporary works and construction sequence for deep excavation with cast in-situ diaphragm walls. In general, it is possible to conclude the main difficulty and uncertainty of the dimensioning are obtaining the soil parameter for diaphragm wall design. And, it is also possible to conclude the monitoring and execution control are paramount to the success of the diaphragm wall construction

Terapia fotodinâmica e luz branca: aspectos analíticos e perspectivas da viabilidade do tratamento

Photodynamic Therapy (PDT) is a technique used to treat several types of lesions, such as cancer, microbial control, and esthetic dentistry cases. The performance of PDT involves the use of a photosensitizer (PS), which mainly will be located in cancer cells and is irradiated with visible light. This process, when it occurs in the presence of oxygen triggers the formation of reactive oxygen species that are cytotoxic to cells. These species cause cell death and subsequent tumor necrosis. The use of white light as a light source for multispectral Photodynamic Therapy and its consequences to the photodynamic effect is not yet completely established, and therefore there is interest in studying the parameters involved for analyzing the best conditions for applying treatment. The wavelength is crucial to improve the therapeutic effect, since both the optical properties of the biological tissue as the PS depend on these parameters. For FS studied in this work (Photogem®) are most often used wavelengths in the red region, due to their larger penetration depth in biological tissue. Thus, the light source becomes a fundamental aspect, their choice depends on the specific application and is based on the tumor location, light dose to be delivered and FS chosen. Despite all the advantages presented by lasers, the fact of having an emission spectrum essentially monochrome makes only one possible transition possible for the absorption of FS is used. Therefore, more extensive light sources such as light emitting diodes (LED), could be better used in some cases the laser, with the additional advantage of a reduced cost. Therefore, the choice of the white LED comes from an emission spectrum that still wider LED colors defined by allowing greater use of the several absorption bands and with varying depths of operation, according to the wavelength... (Complete abstract click electronic access below)

Desenvolvimento e validação de métodos analíticos para a determinação de difloxacino em comprimidos revestidos

O difloxacino - DIFX - é um antimicrobiano de amplo espectro de ação pertence à 3ª geração das quinolonas, e foi especialmente desenvolvido para o uso veterinário aprovado em vários países. Seu uso é indicado para infecções cutâneas, superficiais ou profundas, infecções genitourinárias, respiratórias e digestivas, causadas por diversos patógenos como Staphylococus sp, Escherichia coli, Pseudomonas spp., Esnterobacter spp., Mycoplasma spp., Salmonella, Klebsiella, Streptococus spp. e outras cepas suscetíveis. Na literatura foi possível encontrar alguns estudos envolvendo difloxacino em matéria prima e matrizes biológicas, entretanto para a forma farmacêutica comprimidos revestidos nada foi encontrado. Neste trabalho foram desenvolvidas metodologias analíticas para determinação e quantificação de difloxacino comprimidos revestidos por espectrofotometria na região UV e Cromatografia Líquida de Alta Eficiência (CLAE). No método de espectrofotometria na região UV a curva analítica mostrou-se linear entre 3,0 e 8,0 μg/mL (r = 0,9999), com exatidão e precisão satisfatórias, os coeficientes de variação intradia e interdia foram 1,92 e 1,87 respectivamente. Os limites de detecção (LOD) e quantificação (LOQ) apresentaram valores de 0,32 e 0,11 μg/mL, respectivamente. A porcentagem de difloxacino encontrada nas amostras foi de 105,05 %. Para o método por CLAE, a curva analítica mostrou-se linear no intervalo de 1,0 e 6,0 μg/mL (r=0,9997), a exatidão da metodologia proposta foi calculada pelo método de adição de padrão apresentando uma média de 100,06%. Os valores de precisão foram satisfatórios, com coeficientes de variação intradia e interdia de 1,35 e 1,64 %, respectivamente. O limite de detecção apresentou valor de 0,07 μg/mL e quantificação de 0,24 μg/mL. O doseamento da amostra de Dicural® comprimidos revestidos foi encontrado 94,70% de difloxacino

Procedimentos para análise de lucratividade de produtos no setor de autopeças metálicas

In a globalized world, organizations face an increasingly dynamic, innovative and competitive environment, so that this condition requires continuous adaptation to market developments. Intense competition requires organizations to further improve their performance, making productive efficiency a key factor for survival. A methodology that has added value to the product through a reconfiguration of the production method is the implementation of a management philosophy called Lean Six Sigma. The main objective of this work is, in the light of the Lean Six Sigma philosophy, intervene in a critical-collaborative way to develop procedures for analyzing the profitability of products in a company specializing in steel processing. To achieve this goal, were applied the method of action-research to intervene in a group of professionals for the study of the profitability of products in a auto parts industry. The interaction of practical and theoretical knowledge provided by the action-research allowed the business program was enhanced. The procedures proposed in this study were able to identify the current profitability of the product, the main causes of inefficiency and productive for solutions to reduce production inefficiencies, when the productive systems planned and actual production system were compared. The results indicate that current profitability of -3%, while the parameter provided during budget was 10%. Thus, it is concluded that the low profitability of the products may compromise the company's financial results and affect their competitiveness in the market. To address this problem, the Lean Six Sigma presents itself as a versatile and high applicability philosophy, providing relevant results for characterization and troubleshooting. It was also observed that the evidence presented in this paper can be adapted to other companies in the metal auto parts segment to identify and recover the profitability of products

Avaliação das ocorrências de nitrato e fluoreto nas águas subterrâneas do Estado de São Paulo

Concerns about the quality of groundwater have been continuously rising, considering its importance for the public water supply in the State of São Paulo, and even more due to the impact that anthropic action has been causing to the original quality of that natural resource. It is extremely relevant to identify the contamination focuses along the aquifers of the State of São Paulo. This report aims to evaluate nitrates and fluorides concentrations along the aquifers present in the state, in order to identify places where change in the quality of groundwater is observed, through the comparison between measured concentrations and reference values, such as: “Intervention Value” (maximum allowed value) and “Alert Value” (attention required value). To perform this research, a full compilation and organization has been done on chemical analysis data from the “Sistema de Informações de Águas Subterrâneas - SIDAS”, made available by the “Divisão de Procedimentos de Outorga – DPO” of the “Departamento de Água e Energia Elétrica – DAEE”. This work has made possible the build-up of a database composed by 6,860 wells, with analytical data ready to be interpreted, containing information about water pH, electrical conductivity, hardness and chloride, iron, fluoride, nitrogen, nitrates and total dissolved solids concentrations. This database shows concentration data for nitrates (6,157 wells) and fluoride (3,316 wells). From this information, maps for nitrates and fluorides concentration distributions have been made, by each aquifer and each “Unidade de Gerenciamento de Recursos Hídricos – UGRHI”, which has enabled the identification of wells where the concentrations of these chemical compounds exceeds the reference values. Concerning nitrates, these analysis indicated the existence of contamination sources from rural and urban zones, mostly present in the west region... (Complete abstract click electronic access below)

Manual de procedimentos técnicos para manutenção preventiva em empilhadeiras na área de prestação de serviços

The service area is in full development in the world, and it is proven the benefits of outsourcing services to large companies, which deliver services and manufacturing experts can focus only on production of their products. In the case of cargo handling is no different, many factories hire specialized companies to reduce fixed costs and factory overhead. And with the intense competition in the market, service providers are increasingly seeking to reduce costs in order to offer services at competitive prices. So if we see a growing need to train its employees to perform services faster and with better quality. In this work, will be a handbook of technical procedures for preventive maintenance, as well as a catalog of parts required to perform the same for Toyota 8 Series forklifts. Will be developed also tools to control and carry out the preventive maintenance of these trucks, such as Check-list and a manual of tools needed for each procedure. The results show that service quality has improved considerably and the cost of wrong parts decreases more than 15%

Avaliação da Taxa de Exposição em Exames Radiológicos Realizados em Procedimentos Cirúrgicos - Minimização dos Riscos em Indivíduos Ocupacionalmente Expostos

This paper consists in the evaluation of the exposure rate to ionizing radiation to which professionals working in surgical procedures which require radiological examinations are subjected. Were initially performed real-time readings of exposure rate within four distinct operating rooms during the execution of four surgical procedures that made use of fluoroscopy equipment (including three orthopedic surgeries, one in the shoulder, one in the arm, another for deployment of metal pin in the leg region, and a fourth for vascular procedure); in these surgeries were used ionization chamber detector and an electrometer. In order to check the values achieved, was made a re-evaluation of the distribution of the rate of exposure to radiation, from the surgical procedures, now with thermoluminescent dosimeters (TLDs). For this, thirty TLDs were distributed in the operating rooms, arranged in points of interest as occupation by professionals. The TLDs were prepared for thirty consecutive days, after which they were removed and replaced with new dosimeters not exposed yet. The dosimeters were subjected to reading of the rate of exposure; this procedure was repeated for four months without interruption. The quantification of the results sought primarily to convert the rate of exposure for equivalent dose rate, both in measurements with ionization chamber as in measurements with TLDs, in order to highlight the presence of the biological effect of ionizing radiation for comparisons within scientific context. Then, the results were plotted to establish the relationship between the values of equivalent dose and the distance to the central axis of the x -ray source, confirming the inverse square law for distance. Finally, the values were associated with the maximum limit recommended by the legislation for occupationally exposed individuals. The methodology for the analysis and quantification of the data in this work aims at implementing a work plan that meets ...