Effect of seating forces on cement-ceramic adhesion in microtensile bond tests

Objectives: The aim of this study was to evaluate the effect of different seating forces during cementation in cement-ceramic microtensile bond strength (μTBS). Materials and methods: Forty-five blocks (5 × 5 × 4 mm3) of a glass-infiltrated alumina-based ceramic (In-Ceram Alumina) were fabricated according to the manufacturer's instructions and duplicated in resin composite. Ceramic surfaces were polished, cleaned for 10 min in an ultrasonic bath, silica coated using a laboratory type of air abrasion device, and silanized. Each treated ceramic block was then randomly assigned to five groups (n = 9) and cemented to a composite block under five seating forces (10 g, 50 g, 100 g, 500 g, and 750 g) using a dual-cured resin cement (Panavia F). The ceramic-cement-composite assemblies were cut under coolant water to obtain bar specimens (1 mm × 0. 8 mm2). The μTBS tests were performed in a universal testing machine (1 mm/min). The mean bond strengths values were statistically analyzed using one-way ANOVA (α ≤ 0. 05). Results: Different seating forces resulted in no significant difference in the μTBS results ranging between 13. 1 ± 4. 7 and 18. 8 ± 2. 1 MPa (p = 0. 13) and no significant differences among cement thickness. Conclusions: Excessive seating forces during cementation seem not to affect the μTBS results. Clinical relevance: Excessive forces during the seating of single all-ceramic restorations cementation seem to display the same tensile bond strength to the resin cement. © 2012 Springer-Verlag.

Comparative analysis of Enterococcus faecalis biofilm formation on different substrates

Introduction: The aim of this study was to compare Enterococcus faecalis biofilm formation on different substrates. Methods: Cell culture plates containing growth medium and E. faecalis (ATCC 29212) were used to grow biofilm on bovine dentin, gutta-percha, hydroxyapatite, or bovine bone. Substrates were incubated at 37°C for 14 or 21 days, and the medium was changed every 48 hours. After the growth induction periods, specimens (n = 5 per group and per induction period) were stained by using Live/Dead, and the images were analyzed under a confocal microscope. The total biovolume (μm3), live bacteria biovolume (μm3), and substrate coverage (%) were quantified by using the BioImage-L software. Results obtained were analyzed by nonparametric tests (P =.05). Results: Biofilm formation was observed in all groups. Gutta-percha had the lowest total biovolume at 14 days (P <.05) and hydroxyapatite the highest at 21 days (P <.05). No significant difference was observed in green biovolume at 14 days. At 21 days, however, hydroxyapatite had the highest volume (P <.05). The percentages of coverage were similar among all substrates at 21 days (P >.05), but at 14 days, bovine bone presented the highest coverage (P <.05). Conclusions: E. faecalis was capable of forming biofilm on all substrates during both growth periods; hydroxyapatite presented the highest rates of biofilm formation. The type of substrate influenced the biofilm characteristics, according to the parameters evaluated. © 2013 American Association of Endodontists.

Influence of densities on the growth of brown mussel Perna perna L. cultivated in suspended socks at Caraguatatuba, southeastern Brazil

This study was carried out in a marine area at Cocanha Beach, Caraguatatuba, southeastern Brazil, aiming to determine the most appropriated density for brown mussel (Perna perna L.) cultured in suspended socks (French System), in order to reduce costs with acquisition of juvenile mussels (seed) and labor. In September 2007, 15 socks measuring 2 m each were reared at densities of 300, 400 and 500 seeds/m. After 250 days, mussels were harvested and separated in two length classes: non-commercial (<6 cm) and commercial (≥6 cm). Mussels were counted and weighed. In August 2008, the experiment was repeated with 1-m-long socks at lower densities (200, 250 and 300 seeds/m) in order to identify differences among commercial-sized mussels only. Data were analyzed by ANOVA or nonparametric Kruskal-Wallis test, followed by Tukey or SNK tests, respectively. The results suggest that it is feasible to use densities from 250 to 300 seeds/m, since biomass yields are similar to those registered at higher densities and the use of mussel seed is therefore optimized. © 2013 Springer Science+Business Media Dordrecht.

Effect of Zingiber officinale and propolis on microorganisms and endotoxins in root canals

The purpose of this study was to evaluate the effectiveness of glycolic propolis (PRO) and ginger (GIN) extracts, calcium hydroxide (CH), chlorhexidine (CLX) gel and their combinations as ICMs (ICMs) against Candida albicans, Enterococcus faecalis, Escherichia coli and endotoxins in root canals. Material and Methods: After 28 days of contamination with microorganisms, the canals were instrumented and then divided according to the ICM: CH+saline; CLX, CH+CLX, PRO, PRO+CH; GIN; GIN+CH; saline. The antimicrobial activity and quantification of endotoxins by the chromogenic test of Limulus amebocyte lysate were evaluated after contamination and instrumentation at 14 days of ICM application and 7 days after ICM removal. Results and Conclusion: After analysis of results and application ofthe Kruskal-Wallis and Dunn statistical tests at 5% significance level, it was concluded that all ICMs were able to eliminate the microorganisms in the root canals and reduce their amount of endotoxins; however, CH was more effective in neutralizing endotoxins and less effective against C. albicans and E. faecalis, requiring the use of medication combinations to obtain higher success.

Analysis of efficiency and rationality in a sugar-alcohol mill using hyperboloid a-load and potency

Brazil is the world's largest producer of sugar cane and which in the state of São Paulo concentrate the greatest amount of sugar cane field of the country. The sugar-alcohol sector has the capacity to produce sufficient thermal and electrical energy to be used in their process of production and commercialize of surplus in electricity distribution network. Therefore it is necessary to evaluate the energy efficiency and rationality within the mill. Accordingly this research proposed analyze the sugar-alcohol mill's sectors globally and individually, located in the west center of the São Paulo state, using the valuation methodology employed by the Agência Nacional de Energia Elétrica (ANEEL) in the industries that do not have systems of cogeneration. In this analysis, the hyperboloids of load and potency were applied based on the indexes of potency factor and load factor that allow estimate the efficiency and rationality. © 2013 IEEE.

Elevated hyaluronan and extracellular matrix metalloproteinase inducer levels in women with preeclampsia

Purpose: Preeclampsia (PE) is a specific syndrome of pregnancy clinically identified by hypertension and proteinuria from the 20th week of gestation associated with a systemic inflammatory response and oxidative stress. While pro-inflammatory cytokines have been extensively studied in PE, other factors in the circulation that also influence the magnitude of inflammation have received much less attention. The present study compared serum concentrations of five immune-regulatory compounds in normotensive pregnant women and in women with gestational hypertension (GH) or PE. Methods: Sixty women with PE, 53 with GH and 40 normotensive women paired by gestational age were evaluated. Sera were evaluated for concentrations of extracellular matrix metalloproteinase inducer (EMMPRIN), hyaluronan, gelsolin, visfatin and histone 2B by ELISA. Differences between groups were analyzed by nonparametric tests, with a significance level of 5 %. Results: Increased levels of EMMPRIN and hyaluronan were present in preeclamptic women as compared to the GH and normotensive groups. There was no difference between groups in gelsolin, visfatin or histone 2B. Conclusion: Increased release of EMMPRIN and hyaluronan may contribute to an elevated pro-inflammatory response and tissue damage in women with PE. © 2013 Springer-Verlag Berlin Heidelberg.

Longitudinal analysis of serological tests officially adopted by the Brazilian Ministry of Health for the diagnosis of canine visceral leishmaniasis in dogs vaccinated with Leishmune®

Development of vaccines against canine visceral leishmaniasis (CVL) may provide a prophylactic barrier, but antibody response detected by standard diagnostic techniques may not separate vaccinated from naturally infected dogs. Moreover, anti-Leishmania antibody levels in vaccinated dogs may be detectable for months. Accordingly, the aim of the present study was to comparatively evaluate an in-house ELISA with three serological tests officially adopted by the Brazilian Ministry of Health for the diagnosis of CVL in dogs vaccinated with Leishmune®. A total of 18 mongrel dogs were submitted to a complete protocol of the vaccine, monitored and evaluated in 5 times (T0-T4) up to 180 days after T0. Twenty-one days after the first dose (T1), 50% of the dogs were seropositive by the in-house ELISA and 5.5% by IFAT, while by the official ELISA and DPP® CVL rapid test all dogs tested negative. At time T2, 42 days after of the first dose, 100%, 83.3%, 11.1%, and 5.5% of the dogs were seropositive by the in-house ELISA, IFAT, official ELISA kit and the DPP® CVL rapid test, respectively. Ninety days after the first dose (T3), 100%, 83.3%, 72.2% and 33.3% of the dogs were seropositive by the in-house ELISA, official ELISA kit, IFAT, and the DPP® CVL rapid test, respectively. Finally, at time T4, 88.8%, 33.3%, 11.1% and 5.5% of the dogs were seropositive by the in-house ELISA, official ELISA kit, DPP® CVL rapid test and IFAT, respectively. In conclusion, dogs vaccinated with Leishmune® cross-react by an in-house ELISA and by the three official Brazilian serological tests for the diagnosis of canine visceral leishmaniasis up to six months after the first vaccine dose, and may be mistakenly diagnosed and removed. © 2013 Elsevier B.V.

Parametric VaR with goodness-of-fit tests based on EDF statistics for extreme returns

Parametric VaR (Value-at-Risk) is widely used due to its simplicity and easy calculation. However, the normality assumption, often used in the estimation of the parametric VaR, does not provide satisfactory estimates for risk exposure. Therefore, this study suggests a method for computing the parametric VaR based on goodness-of-fit tests using the empirical distribution function (EDF) for extreme returns, and compares the feasibility of this method for the banking sector in an emerging market and in a developed one. The paper also discusses possible theoretical contributions in related fields like enterprise risk management (ERM). © 2013 Elsevier Ltd.

Influência do square stepping exercise nos componentes da capacidade funcional e funções cognitivas de idosos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da eficácia analgésica da farmacopuntura com meloxicam e da aquapuntura preemptivas em gatas submetidas à ovariosalpingohisterectomia (OSH)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eficácia do óleo de Melaleuca alternifolia sobre bactérias cariogênicas e sua citoxicidade sobre cultura de queratinócitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização das subpopulações de monócitos M1 e M2 e associação com produção de citocinas em gestantes portadoras de pré-eclâmpsia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da interface dentina/agentes protetores em restaurações com resina composta, através de microscopia eletrônica de varredura

Pós-graduação em Ciências Odontológicas - FOAR

Resposta imune diferenciada no fígado e no baço de cães com leishmaniose visceral

Pós-graduação em Medicina Veterinária - FCAV

Serological cross-reactivity of Trypanosoma cruzi, Ehrlichia canis, Toxoplasma gondii, Neospora caninum and Babesia canis to Leishmania infantum chagasi tests in dogs

Introduction: The aim of this study was to evaluate the serological cross-reactivity between Leishmania sp. and other canine pathogens. Methods: Positive serum samples for Ehrlichia canis, Babesia canis, Toxoplasma gondii, Neospora caninum and Trypanosoma cruzi were tested using three serological methods enzyme linked immunosorbent assay (ELISA), indirect immunofluorescent antibody test (IFAT) and Kalazar Detect™, for canine visceral leishmaniasis. Results: Of the 57 dog samples tested, 24 (42.1%) tested positive using one of the three serological methods: 10/57 (17.5%) for ELISA, 11/57 (19.3%) for IFAT and 3/57 (5.3%) for Kalazar Detect™. Conclusions: Our results demonstrated that the presence of other infectious agents may lead to cross-reactivity on leishmaniasis serological tests.