Identificação e implementação de melhorias nas operações de transporte interno de matéria-prima de um aindústria de bens de consumo

The world is an environment in constant process of globalization, where physical boundaries are no longer limits. The competitiveness has also evolved, forcing companies to adopt efficient practices in order to increase productivity gains, reduce losses and improve quality. Nowadays, the supply chain management and its element, including the internal logistics, is regarded as a key element for gaining competitiveness. Thus, this study focused on identifying and implementing improvements in the internal raw materials transport operations of a consumer goods company, based on concepts and tools of the lean thinking. The results showed considerable gains in productivity with consequent cost reduction, proving the efficiency of the methodology lean even in support areas of an organization.

Durabilidade da argamassa mista de revestimento interno contendo dregs-grits em substituição à areia

This paper concerns about the durability of new material in construction. It is noteworthy the fact that increases increasingly searching for alternative materials that do not depend only of natural resources and at the same time be an alternative for reuse of industrial waste. Since the construction materials have a long life and a high cost of civil works and maintenance, it is crucial to estimate the behavior of a new product. Thus , this work discuss the durability of mixed mortar lining , made with waste from the process Kraft pulp production , known as dregs and grits , in partial replacement of sand. Tests were conducted to simulate conditions as adverse environments of constant heat and fire, with the aim of analyzing the behavior of mortar mixed matched the behavior of standard mortar

Revestimento interno de tubulação por um processo de centrifugação utilizando resina éster-vinílica com adição de cargas

Being the corrosion one of the great problems facing the industry today, specifically the internal corrosion of pipes in chemical and petrochemical industries, hence this work proposes a new type of internal coating in order to avoid fouling and decrease the pressure loss in the flow. For this, we use a composition of vinyl ester resins and manometric loads, which after cleaning and preparation of the internal surface of the tube will be applied through a process of centrifugation, adjusted by a lathe. After curing the resin, a test of roughness will be realized in order to analyze the reduction of friction factor and thus be able to conclude whether there was a significant decrease in pressure drop. With test results in hand, we hope to obtain a coating that meets most of the properties required by the industry and to provide a reduction in operating costs and a visible improvement in the conditions of use of the pipe

SIG e álgebra de mapas na elaboração de um mapa de potencial de erosão em áreas de silvicultura

Cette étude visait à générer une carte du potentiel d'érosion pour la Ferme Santa Edwirges, située à Lorena /SP. Les résultats ont etés classifiés en faible, modéré, élève et très élève potentiel d'érosion et la carte obtenue a été comparé par rapport aux autres cartes existantes pour la zone d'étude. La méthodologie proposée se basant sur une application qualitative simple L’équation Universelle de Perte de Sol (USLE ou EUPS), en considérant les parties de l'équation: érodibilité, la topographie et l'utilisation des terres. Les donnés ont etés intégrés par l'algèbre de carte dans l’environnement SIG de ArcGIS. Pour la représentation de chacune de ces parcelles, nous avons utilisé une carte des formations superficielles de la ferme, généré à partir d'une ré-interprétation de la carte géologique, une carte de la pente et une carte d'utilisation des terres, attribuant un poids d’important pour chaque catégorie de ces cartes dans le processus d'érosion et dans l'algèbre proposée. Les résultats obtenus sont compatibles avec les zones identifiées comme les plus critiques sur terrain. La ferme a été identifiée comme de potentiel d'érosion modérée et la partie sud de la ferme le plus critique, suivi du groupe conduit par la zone de cisaillement, par contre les plaines proches des rivières ont eté identifié comme la zone plus stable avec moins de potentiel d'érosionDe la comparaison des résultats de ce travail et d'autres qui ont fait antérieurement dans la zone d’intéresse, qui ont utilisé les paramètres géotechniques dans la représentation de l'érosivité des sols, nous avons pu voir des résultats similaires, en particulier dans les zones à potentiel élevé et faible pour l'érosion. De la discussion et analyse des résultats, la méthodologie proposée à eté validée

Auxílio do geoprocessamento para a geração do mapa de suscetibilidade à erosão: o caso do córrego Mandu, Rio Claro/SP

The mining of sand, currently, is essential for urban growth, by providing input for the building industry. The consequences of this mining activity to environmental triggers may be severe and irreversible. Among the major impacts caused by sand mining the riparian vegetation removal is detached. The riparian vegetation is essential for balance and maintaining the local ecosystem. For all that had been shown, is possible to verify the importance of environmental studies in areas wich there are mining. This study aimed specially to assess environmental impacts triggered by a mining, located near the headwaters of the stream Mandu, situated in Ajapi, District of Rio Claro-SP. For this purpose, we used remote sensing techniques and GIS to produce thematic maps of slope, pedology, geology, land use and occupation of the soil, and riparian vegetation, using the capabilities of GIS / ArcGIS. The slope map was based on data from the Cartographic IGC 1979, scale 1:10,000. For the production of pedological and geological maps were used Semi-Detailed soil survey of the state of São Paulo, 1981 (1:100,000) and the Geological Map of Zaine (1994), scale 1:50,000, respectively. Since the maps of Use and Land Occupation and Riparian Forest were obtained by visual interpretation of the image of CBERS 2010 following the merger between the HRC and CCD images. From these mappings, and through multi-criteria analysis, map of susceptibility to erosion was made, which supported the environmental assessment of the studied area, indicating susceptible and unsuitable areas for the deployment of economic activities and urban sprawl. This study serves as a model can be replicated in other watersheds, assisting in the proper use planning and land use, aiming at the rational use of natural resources

Extensometria: estudo das microdeformações ao redor de três implantes de hexágono interno, com posicionamento linear, sob a influência da fundição de coifas plásticas e usinadas

The objective of this in vitro study was quantify the micro strain development around the internal hexagon implants, varying the type of prosthetic coping. For This reason, three implants of internal hexagon were inserted into one polyurethane block in line placement. Microunit abutments were screwed onto the implants. Tangentially the implants were bonded the strain gauges, two to the center implant. Ten structures, each one containing three copings were cast in Co-Cr alloy, that were divided into groups in the first group, plastic copings were used, and in the second group machined copings were used. The superstructure’s occlusal screws were tightened onto Microunit abutments with 10 Ncm torque, the magnitude of micro strain was recorded. The mean values of each strain gauge of each plastic copings were 363,37 ± 237,66 and the machined copings were 338,12 ± 223,01. The data were analyzed statistically by t- Student test. No statistically significant difference was found between the prosthetic copings (p= 0,867). It was concluded that to internal hexagon implants in line placement, the type of copings presented similar magnitude of micro strain after prosthetic occlusal screw was tightened

Desenvolvimento de uma metodologia para elaboração de modelos de predição dos níveis de ruído do campo acústico de usinas hidrelétricas

Pós-graduação em Engenharia Mecânica - FEIS

Programação térmica fetal: efeitos sobre a temperatura de preferência e características morfofisiológicas de frangos de corte

Pós-graduação em Zootecnia - FCAV

Mapeamento do nível radiométrico e construção de mapa espacial em serviço de medicina nuclear

Nuclear Medicine is a medical modality of therapy and diagnostic imaging using unsealed radioactive sources for its purposes. This routine activity promotes the transit of radioactive sources for the area of installation, beyond the transit of patients injected with radioisotope, which also contribute to raising the radiometric level of environment. As a consequence, it has exposured workers and public individuals to the ionizing radiation. There are protective mechanisms of radiation exposure, personal protective equipments, and measurement planes established in standard measurement at certain points of the environment in order to identify any increase in radiometric levels and \ or contamination, but do not cover the entire space occupied by workers and patients. To accomplish with the individual dose limits established by the National Commission of Nuclear Energy, it is interesting if there is an individualized classification for each Nuclear Medicine service. This work aimed to promote an analysis of the radiometric level distribution across the extent of the Technical Nuclear Medicine Sector of Hospital of the Botucatu Medical School, and produce a spatial map to identify locations with higher exposure rate to the ionizing radiation, can be used as a risk map to assist the Occupationally Exposed Individuals (IOE). To perform the radiometric levels checking it was used a digital Geiger-Muller detector available in the sector, due to its practicality compared to other detectors. Measurements were carried out at four different times for all days of the week, at points strategically established to cover all the installation

TLR 2, TLR 4, ROS, óxido nítrico, P38 e IKK em células mononucleares de cães com leishmaniose Visceral tratadas com o imunomodulador P-MAPA: Larissa Martins Melo. -

Pós-graduação em Ciência Animal - FMVA

Colômbia: o conflito interno e as fronteiras com o Equador e a Venezuela

The article presents a brief panorama of the relations between the government of Alvaro Uribe and the governments of Rafael Correa and Hugo Chavez of the impacts of the Columbian conflict on the Colombia- Equator-Venezuela borders.

Clareamento interno em dentes despolpados como alternativa a procedimentos invasivos: relato de caso

The increasing interest of patients for a better aesthetic appearance of their smile, associated with the development of new materials and techniques, encouraged by media couverage of this concept of beauty, provided an important evolution of cosmetic dentistry. As the darkness of a single anterior tooth or a group of teeth, in most cases, impairs the appearance of the smile and there is growing appreciation of the less invasive procedures, the technique of tooth bleaching is an important option for aesthetic treatment. To have success in the bleaching treatment, it is important to have knowledge of the origin, nature and composition of the stain. Among the causes of color changes acquired post-eruptive, dental trauma, with or without pulp necrosis, is one of the most commonly encountered etiologies, characterized by a reddish-brown color. Current techniques of bleaching for teeth treated endodontically employ oxidative agent hydrogen peroxide. The objective of this paper is to describe the immediate technique of bleaching non-vital tooth by presenting a clinical case.

Avaliação de parâmetros de desempenho muscular em jovens sedentárias com dor lombar

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Não preferência para alimentação e antibiose em genótipos de feijão-caupi a Chrysodeixis includens (Walker, 1857) (Lepidoptera: Noctuidae)

Pós-graduação em Agronomia (Produção Vegetal) - FCAV