Análise de custo-efetividade de métodos preventivos para superfície oclusal de acordo com o risco de cárie: resultados de um ensaio clínico controlado

This study presents the results of a cost-effectiveness analysis in a controlled clinical trial on the effectiveness of a modified glass ionomer resin sealant ( Vitremer, 3M ESPE) and the application of fluoride varnish (Duraphat, Colgate) on occlusal surfaces of first permanent molars in children 6-8 years of age (N = 268), according to caries risk (high versus low). Children were examined semiannually by the same calibrated dentist for 24 months after allocation in six groups: high and low risk controls (oral health education every three months); high and low risk with varnish (oral health education every three months + varnish biannually); and high and low risk with sealant (oral health education every three months + a single application of sealant). Economic analysis showed that sealing permanent first molars of high-risk schoolchildren showed a C/E ratio of US$ 119.80 per saved occlusal surface and an incremental C/E ratio of US$ 108.36 per additional saved occlusal surface. The study concluded that sealing permanent first molars of high-risk schoolchildren was the most cost-effective intervention.

Potencialidade do gps de navegação garmin 12 xl utilizando um sistema de baixo custo

Since 2000 the use of the GPS navigation increases considerably. The reason for that was the deactivation of the selective availability in May 2000. However, these receivers do not register the observables, they just estimate and store them and that prevents the post-processing data. Based in this aspect some softwares were developed and are available for free. They allow recording the GPS observables, pseudorange and carrier phase. These programs are able to read in binary files and record information concerning the GPS observables and to convert binary format to a RINEX format. This study presents the GPS Garmin 12 XL evaluation using free programs. Two experiments were carried out in Presidente Prudente-SP region using the relative static survey. The processing was carried out with intervals of 30, 15, 10 and 5 minutes. The results were compared with the coordinates from a geodetic receiver and show that 98.9 % of the points, the values in relation to the planimetric accuracy were better than 0.50 m. The only baseline which the value was larger or equal to 0.50 m is the point M0001 (baseline lesser than 2 km) referred to the first experiment. In terms of precision the values did not exceeded 0.30 m.

Ponto fixo: uma introdução no ensino médio

Pós-graduação em Matemática em Rede Nacional - IBILCE

Desenvolvimento de equipamento multifuncional portátil de baixo custo para determinações fotométricas, turbidimétricas, nefelométricas e fluorimétricas

Pós-graduação em Química - IQ

Custo de produção e lucratividade da cultura do amendoim no município de Jaboticabal, São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema de Aquisição de Baixo Custo para um Dinamômetro Biomédico

Objective: to create a purchasing system for optimizing a low cost device fabrication itself. Method: For this purpose was designed a system which is powered by a 12V battery center. The full bridge of "Wheatstone" is powered by the central battery set to 9V. Results: The sign of the strain has a range of 0 to 30 mV which is amplified filtered by a signal conditioner own manufacturing using an LM 324. The electrical signal then passes to vary from 0 to5V which will be processed in an analog input of PIC microcontroller. Tests for the registration and interpretation of data are through software MyOpenLab. Conclusion: The work is in progress and initial results suggest that the system will be able to measure muscular strength accurately and cost-effective.

Eficácia de mobiliário escolar adaptado de baixo custo no desempenho funcional de criança com paralisia cerebral

Indivíduos com Paralisia Cerebral apresentam desenvolvimento motor atípico, caracterizado por alterações posturais, de coordenação motora e de tônus muscular, que resulta em limitações no desempenho de atividades funcionais. Neste contexto destaca-se a prescrição e confecção de recursos de tecnologia assistiva com objetivo de maximizar as habilidades funcionais destas pessoas e prover sua inclusão social. Os indivíduos com paralisia cerebral, muitas vezes, têm dificuldade para a manutenção da dinâmica corporal, principalmente na postura sentada. O objetivo deste estudo foi o de confeccionar uma cadeira e mesa escolar adaptadas com material de baixo custo e verificar sua eficácia no desempenho grafomotor de uma criança com paralisia cerebral. O participante foi uma criança com diagnóstico de paralisia cerebral diplégica, do gênero masculino. A coleta e registro dos dados foram feitos em três momentos, com a criança posicionada no mobiliário adaptado, no mobiliário escolar comum e novamente no mobiliário adaptado, para se estabelecer a comparação. A análise de dados se deu por meio de testes estatísticos não paramétricos. Não houve significância estatística e foi verificada uma inconstância nos dados apresentados, já que não se pode afirmar ao certo qual mobiliário foi mais eficaz na realização da atividade proposta e nem se houve aprendizado motor com a sua repetição. Esse fato não invalida a adequação de mobiliário escolar ao aluno com paralisia cerebral, visto que este é um fator importante para favorecer o controle e estabilidade postural ao individuo, o que interfere na coordenação motora fina destes indivíduos, influenciando no seu desempenho em atividades escolares.

Projeto e desenvolvimento de robô cartesiano de baixo custo para manipulação de produtos em linhas de média cadência

Pós-graduação em Engenharia Elétrica - FEB

Análise da relação desempenho/custo de alguns coletores solares comerciais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo etnobiológico da interação dos pescadores de cerco-fixo com as tartarugas marinhas da região de Cananéia, litoral sul de São Paulo

Marine turtles are reptiles that occur on the Brazilian coast and can travel very large distances between feeding and nesting grounds. Five species found in Brazil are threatened. The consumption of turtle meat and eggs is an ancient habit in many coastal communities around the world. The main causes that threaten these species are the increase in fishing and the drastic changes in the environment. The presence of turtles near the beaches and their accidental capture were reported by fishermen in the region of Cananéia, where this work was developed. This study was also made based in interviews of fishermen that living in the area and the follow up of their fishing activities. This methodology made possible to identify the turtles in the area, the behavior of the fishermen with these animals and the relation between non-commercial fishing and turtles. The fishing traps area has a direct relation with the capture of turtles. The higher incidence of turtle capture is usually next to islands, rocky coasts, low lands and bay entrances, which are areas where the most common species of the region (Chelonia mydas) normally look for food. The fishermen opinions about the critical situation of these species and their conservation has also been studied. Several programs in Environmental Education for the communities of the region have been recommended

Estudo de caso: formulação de custo de um produto de usinagem em uma pequena empresa

Many variables are indirectly involved in the transformation of raw material into a metallurgical industry, such as machine hours, hours of hand labor directly and / or indirect, setup time, etc. This research focuses on the complexity of formulating the cost of metallurgical products, based on a case study, in which one has incurred a large loss on the sale of a product called Punch. The main objective of this work is to define the variables of the cost of members and other metallurgical products, so simplified general, checking what were the failures costing the case studied, in order to help others. The method of formulating cost was determined as recommended by SEBRAE guidance for small businesses. The results showed a loss R$ 13.201,00 in the batch of 15 units of punch. Possible improvements have been identified for reducing the production cost

WiMAX interoperabilidade mundial para acesso de microondas

This paper presents a technique dubbed WiMAX radio link, the IEEE 802.16 was completed in October 2001 and published on April 8, 2002 and is constantly updated, this technology specifies an interface for wireless metropolitan networks (WMAN) and is under control of the WiMAX Forum, which is a group of companies responsible for the dissipation of this technology in the world, the great benefit of this standard is to offer broadband Internet connection in areas where there is no infrastructure such as fiber optics that has a cost higher. The main purpose of this paper is to present the theoretical and technical characteristics of this technology for both the standard for fixed and mobile standard, regulation of frequency bands by the FCC and description of the physical layer, through to basic concepts are used in many other types of radio link and technologies have been adapted and updated for this little-known standard, allowing a greater range and speed, which are specified and differentiate these advancements is one of the contributions of the work done here. After the theoretical conceptualization stage, a real case study has been inserted in this work to demonstrate the effectiveness of this technology deployed. The idea of presenting this case study is linked to a better view of the use of standard in the market, nationwide

Utilização de gonadotropina coriônica equina em protocolos de inseminação artificial em tempo fixo em bovinos de corte

Current cattlemen must seek methods to maximum reproductive efficiency of their beef herds, making the business competitive and enhancing greater profitability. For the cow-calf producers, efficiency translates into more cows producing one calf every year. Fixed-time artificial insemination (TAI) is one of several technologies that producers utilize to reach this goal. Postpartum anestrus is one of the biggest obstacles to overcome in order to obtain suitable results at the end of the breeding season. The TAI protocols are efficient in re-establishing cyclicity in noncycling cows during the postpartum period, streamlining the use of labor on farms, allowing the use of artificial insemination (AI) on a large scale, and introducing superior genetics to the herd. The protocols that are most commonly used in Brazil are based on progesterone (P4) releasing devices that prevent premature estrus and ovulation; and estradiol (E2) to synchronize the initiation of a new follicular wave. In such protocols, administration of equine chorionic gonadotropin (eCG) helps the development of the follicle, increases ovulation rate, improves the endocrine and uterine environment during proestrus and diestrus, and improves fertility. The use of eCG in TAI protocols for suckled cows, non-lactating cows and heifers increases the pregnancy rate allowing more calves at the end of the breeding season and higher profitability to the cattlemen

Sintese e caracterização da resina fenol-furfurílica para a obtenção de carbono vítreo monolítico

The monolithic glassy carbon is a carbonaceous material, isotropic, non graphitizable obtained by means of carbonization of resins up to 1000 °C. The good physicochemical properties make this material applied in several areas such as aerospace, medicine, electronics, chemistry, among others. It has generally been processed from the use of phenolic and furfuryl alcohol resins. These resins have high crosslink density and high fixed carbon content and are therefore widely applied in aerospace. The combination phenol / furfuryl alcohol resins search for obtaining the most suitable process for the glass-like carbon processing with phenolic resins currently available and of lower cost and easier to synthesize than the furfuryl alcohol resin. The main objective of this work is to obtain a phenol-furfuryl resin with high fixed carbon content combined with low porosity of the material. Different synthesis routes have been adopted along with thermal analysis techniques, FTIR and image analysis. The resin obtained through partial synthesis process presented the characteristics sought in this work

Experimentos de baixo custo para o ensino de eletrostática no nível fundamental

The experimentation in the teaching of physics has been extensively studied over the years because of its potential as a tool demonstration of physics phenomena studied in classroom. In such a perspective view of the action of apprentice student involving teaching future teachers of physics, under the Program PIBID CAPES, developed since 2009, seeks ways to improve the teaching of physics experiments using the theme chosen for the electrostatic work was . In this particular work, we report the development of the project in a State School located in the city of Rio Claro, in two rooms in the 9th grade in elementary school. It is planned with the activities of teaching physics at this level of education, look at how two different ways of displaying the contents of electrostatics in a playful way for elementary students and implement a library of experiments so that students can take the experiments to their homes