Proposta de um dispositivo para ajuste automático da altura de uma cama hospitalar

This paper proposes a mechanical device to adapt a simple model of hospital bed used in the Emergency Department at Santa Casa of Guaratinguetá, allowing the bed’s height adjustment with electromechanical drive. This adaptation aims to introduce improvements in the routine work of nurses and reduce ergonomic problems stemming from repetitive strain during the transfer of patients to stretchers and wheelchairs, as well as providing more comfort to the bedridden patient. The device is mainly composed of: an electric induction motor used to drive the engine, a steel spindle with square thread, which allows axial displacement of the bed, a transmission system with pulleys and belt, which transmits power supplied by the motor to the spindle. The mechanism allows the height of the bed is regulated between 400 and 800 mm. The estimated implementation cost of this proposal is lower than the acquisition cost of a commercial hospital bed with the same features, which confirms the feasibility of the proposed solution

Proposta de um dispositivo para adaptação em uma cama hospitalar para ajuste de altura

In hospitals, health professionals may face different situations and problems. By following them, it is remarkable that one of the difficulties is related to the support provided by the facilities to carry out their work. This also affects the quality of treatment offered to patients. One of the points of improvement that could be studied is hospital beds. The Fawler's simplest hospital bed type, used in most Brazilian public hospitals, is designed with an ergonomic average height that offers a default position for analysis and treatment of patients. There is no possibility of adjusting the height of those beds, and hence there is a limitation in this regard since that height is fixed, but the physical structures of the workers and patients may vary widely and there may be a conflict when there are people too large or small involved in this process. Beyond that, studies by experts show that beds with height adjustment decreases the muscular effort and improve the movement quality of the spine of nursing staff, reducing the force on certain vertebrae and also the ergonomic risk. Of course, patient comfort is also affected accordingly. As the beds made with height adjustment are very expensive, this study aims to design a device to adapt the not adjustable beds. The project must be viable from an economic and mechanic standpoint, being able to adapt both old and new simplest Fawler hospital bed models, since their dimensions are similar. The final result shows that it is possible to adapt such beds using the designed concept at a viable cost. Furthermore, this concept could be applied in other bed types or objects that have hollow feet

Produção de carvão vegetal a partir da madeira de Eucalyptus saligna clone SI70 com tres anos e meio de idade

Charcoal is obtained from carbonization, much used in the steel industry for ore reduction, using as raw material the Eucalyptus. The present study aims to verify whether the main Eucalyptus saligna genetically modified produce quality charcoal with only 3.5 years old. The study was done with material collected from three trees, divided into five discs removed at 0, 25 , 50 , 75 and 100 % of the commercial height of the tree. The procedures adopted were based on standards published by ABNT. The results were satisfactory for the parameters: basic wood density with an average of 0.39 ± 0.0082 g / cm ³; volatile materials from coal with an average of 19.35 ± 3.27 %, fixed carbon content of the coal with an average of 75.62 ± 3.40 % and gross calorific value of coal with an average of 4694.43 cal / g, and unsatisfactory results for ash content averaging 5.03 ± 0.23 when compared to the values found in the literature. It was concluded that the studied wood is able to produce charcoal, but the factors of production should be better observed, such as heating time which exerted direct influence on the determination of ash content

Variação do estoque de madeira morta em diferentes altitudes de floresta ombrófila densa atlântica

As florestas tropicais são naturalmente amplos reservatórios de carbono devido à alta produtividade e extensão (Malhi et al. 2000). Em termos do ciclo do carbono, o papel das florestas tropicais como fonte ou sumidouro de CO2 tem sido amplamente debatido (Saleska et al. 2003), portanto, estudos sobre a capacidade de estoque de carbono destes ecossistemas são particularmente relevantes para compreendermos a dinâmica do CO2 para o atual ciclo global do carbono e para compreender o potencial desses ecossistemas atuarem como sumidouro ou fontes de CO2. O objetivo do presente estudo foi verificar se a biomassa de madeira morta acima do solo varia com a altitude (5-50m e 50-500m) em uma Floresta Ombrófila Densa (Mata Atlântica) para entender como o estoque de carbono dessa necromassa varia entre os locais, estoque esse que é matéria prima para liberação de CO2 para atmosfera pelo processo de decomposição. Para estimar a necromassa em pé foram consideradas todas as árvores mortas em pé com diâmetro na altura do peito (DAP = 1,3 metros de altura) maior que 4,8 cm (ou PAP > ou igual a 15 cm), de acordo com protocolo proposto pelo RAINFOR (Rede Amazônica de Inventários Florestais). Todas as árvores mortas em pé foram quantificadas e classificadas a partir da verificação do estado de decomposição da casca de cada indivíduo em quatro classes de decomposição, que possuem diferentes densidades de madeira relacionadas ao estágio de decomposição. A biomassa de madeira morta acima do solo variou com a altitude (figura 2). Essa variação foi de 1,14 Mg ha-1 (parcela B, Terras Baixas) a 7,57 Mg ha-1 (parcela J, F.O.D. Submontana). Em relação às fitofisionomias, houve uma variação de 8,40 Mg ha-1 (Terras Baixas) a 18,38 Mg ha-1 (F.O.D. Submontana)

Uso de composto de poda de árvore e lodo de esgoto como substratos na formação de mudas de sangra d'água (Croton urucurana Baill.) irrigadas com três lâminas de água

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Anatomia comparada da casca de stryphnodendron polyphyllum mart. (fabaceae) em cerrado sensu stricto e mata de galeria

Pós-graduação em Ciência Florestal - FCA

Variabilidade entre materiais genéticos de eucalyptus spp quanto à distribuição de raízes finas em latossolos profundos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crescimento e sobrevivência de espécies arbóreas em plantio de enriquecimento de mata ciliar em restauração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Epifitismo vascular em duas fisionomias vegetais, floresta paludosa e floresta estacional semidecidual no município de Botucatu, estado de São Paulo, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade da forragem de milho e Capim-marandu integrados em sistema agrossilvipastoril com eucalipto

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Métodos de estimativa de peso e altura na avaliação de desnutrição de pacientes com câncer

To calculate the estimated and actual height and weight measures in cancer patients, evaluate the correlation and concordance of these measures and to identify the malnutrition patients. 62 cancer patients, treated at the Amaral Carvalho Hospital (Jaú- SP). For classifi cation of nutritional status, the Patient-Generated Subjective Global Assessment, the Body Mass Index and the relationship with usual weight were used. For the estimated weight was used the algorithm Chumlea et al.7 and estimated height, the equation proposed by Chumlea et al.8 and Kwok & Whitelaw24. The Pearson Correlation Coeffi cient and the Intraclass Correlation Coeffi cient was calculated and simple linear regression was conducted. To compare the malnutrition detected by different methods, the Cochran’s Q test were performed. There was a strong and signifi cant correlation between the estimated and actual weight (r=0,95; CI95%=0,92-0,97; p<0,001) and excellent concordance (ρ=0,95). For height measurements, a signifi cant correlation was observed between the actual and estimated measurement the method Chumlea et al.8 (r=0,78; CI95%=0,66-0,86; p<0,001) and Kwok & Whitelaw24 (r=0,85; CI95%: 0,75-0,90; p<0,001). Concordance was “Good” (ρ=0,72) and “Moderate” (ρ=0,67) between the actual height and estimated by Chumlea et al.8 and Kwok & Whitelaw,24 respectively. There was a strong correlation between the actual and estimated weight and height measures. The reproducibility of the equation proposed by Chumlea et al.8 to calculate height was better. The nutritional status, the patients classifi ed as malnutrition was greater when using the Patient-Generated Subjective Global Assessment and the relationship with usual weight.

Estimativa da altura por dimensões dentárias: uma revisão da literatura

The knowledge of Forensic Anthropology is very importance in cases of identification of human remains. One phase of this process is the study of human height, which can be accomplished with relative ease when intact corpses, complete skeletons or long bones are available. However, the experience of Forensic Dentistry is essential in situations in which there is only information of the skull or of the teeth. The objective of this study was to review in the literature and evaluate works concerning the estimate of the height calculated from dental dimensions. Carrea, in 1920, proposed the estimation of the probable height of an individual by developing formulas for maximum and minimum heights from measurements of the lower central and lateral incisors and canines. The method was used in the case "Josef Mengele", to complement estimates. Tested in the Brazilian population, 70% of match between the actual and the estimated stature were obtained. Using more precise instruments, in the modified method, 96% of correct matching were verified. Recently, a new formula was introduced to estimate height, from measurements of upper teeth, because the technique cannot be used when jaw is not available. The correlation between height and dental dimensions is demonstrated. However, there is still a lack in scientific literature in this field, and further studies are necessary. The estimate of height from dental dimensions can be very useful and important, especially in situations where the complete skeleton it not found, and long bones are not available.

Uso e conservação de plantas medicinais nativas por comunidades quilombolas no município de Alcântara, Maranhão

Pós-graduação em Agronomia (Horticultura) - FCA

Avaliação da administração de bupivacaína à altura da primeira vértebra lombar, sobre parâmetros cardiorrespiratórios, bloqueios sensitivo e anestésico, em cadelas submetidas à ovariohisterectomia

Pós-graduação em Cirurgia Veterinária - FCAV

Allometric equations for estimating tree biomass in restored mixed-species Atlantic Forest stands

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)