Computer tools to aid the learning and design steps for photovoltaic systems

This paper presents novel simulation tools to assist the lecturers about learning processes on renewable energy sources, considering photovoltaic (PV) systems. The PV behavior, functionality and its interaction with power electronic converters are investigated in the simulation tools. The main PV output characteristics, I (current) versus V (voltage) and P (power) versus V (voltage), were implemented in the tools, in order to aid the users for the design steps. In order to verify the effectiveness of the developed tools the simulation results were compared with Matlab. Finally, a prototype was implemented with the purpose to compare the experimental results with the results from the proposed tools, validating its operational feasibility. © 2011 IEEE.

Desenvolvimento e Balanço de energia da Cana-Deaçúcar no Norte Fluminense, Brasil

The growing concern for renewable and cleaner energy sources has increased the demand for biofuels, pointing out the ethanol from sugarcane. The aim of this study was quantify the partition of energy balance components and monitor the physiological development indexes of the sugarcane, relating them to water availability conditions of climate and soil in Campos dos Goytacazes, Norte Fluminense, Brazil. To this end, a micrometeorological station was settled in an area of 13 ha in commercial cultivation. The culture was regularly monitored at 85, 102, 128, 149, 174, 194, 215, 235, 255 and 280 days after cutting (DAC). The variations in water availability directly influenced the rates of crop growth and energy balance. Under the conditions studied most of the available energy (53%) was consumed by the latent heat flux.

Fontes energéticas associadas ao farelo de girassol ou à ureia em dietas para novilhos

The objective of this study was to evaluate the performance and carcass traits of steers fed corn or citrus pulp associated with sunflower meal or urea. Diets were composed of two energy sources (corn grain and citrus pulp) associated with two protein sources (soybean meal and urea), resulting in four treatments in forage:concentrate ratio of 40:60. It were used 24 steers, 1/2 Angus × 1/2 Nellore (18 months old and 329 kg BW) distributed in a completely randomized design which were finished in feedlot for 80 days. It were evaluated the intake, average daily gain and carcass traits of the animals. Intake of dry matter (DMI), crude protein (CPI) and neutral detergent fiber (NDFI) were affected (p<0.05) by diets. The diet with citrus pulp and urea (PU) showed the lowest (p<0.05) DMI (8.30 kg), CPI (1.03 kg) and NDFI (3.31 kg). The average daily weight gain (ADG) followed the behavior of DMI, NDFI and CPI and the lowest value (p<0.05) was observed for animals fed diet PU. Regarding carcass traits, diets containing corn associated with urea (MU) or sunflower meal (MFG) and citrus pulp associated with sunflower meal (PFG), provided the highest (p<0.05) carcass cold weights (238.37, 247.26 and 237.14 kg, respectively). However, the lowest cold carcass dressing percentage (p<0.05) was obtained in diet MU (50.57%). The association of citrus pulp with urea should not be performed when citrus pulp partially or totally replace corn as energy source in diets, because possibly this association promote an energy deficit resulting in lower performance and worse carcass traits of animals finished in feedlot.

Efficiency analysis of an isolated high voltage gain converter operating in resonant and non-resonant mode

This paper presents an efficiency investigation of an isolated high step-up ratio dc-dc converter aimed to be used for energy processing from low-voltage high-current energy sources, like batteries, photovoltaic modules or fuel-cells. The considered converter consists of an interleaved active clamp flyback topology combined with a voltage multiplier at the transformer secondary side capable of two different operating modes, i.e. resonant and non-resonant according to the design of the output capacitors. The main goal of this paper is to compare these two operating modes from the component losses point of view with the aim of maximize the overall converter efficiency. The approach is based on losses prediction using steady-state theoretical models (designed in Mathcad environment), taking into account both conduction and switching losses. The models are compared with steady-state simulations and experimental results considering different operating modes to validate the approach. © 2012 IEEE.

Esforço de escavação e teor de lipídios em rainhas da formiga cortadeira Atta sexdens rubropilosa

Nest digging spends a lot of energy existing a question about how much energy is required to dig the tunnel and initial chamber. It was hypothesized that the lipid content is used during nest digging. This hypothesis was tested by comparing the consequences of increasing digging effort in queens that were experimentally stimulated to excavate a complete founding nest either once, twice or three times consecutively, compared to control queens that didn't dig. Weight and lipid content of queens were quantified. Results showed that, in contrast with the initial expectations, weight and lipid content were not affected by the increased digging effort in the experimentally-induced successive excavations. It was conclude that the excavation by the queens did not affect the percentages of lipids and consequently the energy content, in their bodies. Probably, energy resources for the excavation wasn't originated from lipid reserves, but from other energy sources, perhaps carbohydrates.

Inversor Buck-Boost integrado para aplicações com micro-geradores eólicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metodologia para o cálculo de harmônicas em conversores de potência no sistema HVDC

Pós-graduação em Engenharia Elétrica - FEIS

Apresentação de uma indústria sucroalcooleira sob os conceitos de microrrede de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Biodesel de mamona em trator: desempenho em função do período de armazenamento e da proporção biodiesel/diesel em condição de preparo de solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de levana e bioetanol utilizando cascas de banana por Zymomona mobilis

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Bainha de segurança para acondicionamento de facão canavieiro durante sua vida útil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Etanol: impactos sócio-ambientais de uma commodity em ascensão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Participação da energia fóssil na produção dos fertilizantes industriais nitrogenados com ênfase na uréia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise energética do milho em sistema de plantio direto, em assentamento rural, Itaberá/SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação do desempenho de argamassas com adição de cinza do bagaço de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)