Caracterização físico-mecânica de painel de MDP produzido com madeira de Eucalipto e Bracatinga

This work is the production of particleboard of particles reconstituted from MDP (Medium Density Particleboard) adding particles in the inner layer of Mimosa Scarelli, popularly known as bracatinga, the ratios of 0%, 25%, 50%, 75% and 100%. The panel produced is composed of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending strength, shear strength and residual moisture, and testing of particle size not existing in the standard cited. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests were close to the normative specifications indicating positively the production of MDP with wood decay.

Proposta de implementação da ISO 14001 em uma empresa química

Due to environmental concerns and the current legal requirements, companies are looking for ways to reconcile economic growth with environmental preservation. The purpose of this project is to show the stages of implementation of ISO 14001 in a chemical company and propose changes in chemical procedures creating goals to be achieved. In this paper, the study for the implementation of ISO 14001 is in Viapol ltda., where the lack of environmental management can cause enormous impact to the environment and may generate air, soil and water pollution. The project resulted in a mapping of all the processes and a broad survey of waste and emissions, generating proposals to change some of the processes and and creating programs to achieve the goals and objectives proposed in the Environmental Policy. Adopting an environmental management system (EMS), the company will reduce costs by decreasing the amount of raw material used, shooting down on waste disposal and the amount of it, and increasing productivity. By committing to the implementation of the EMS, companies will be demonstrating a proactive approach to environmental issues and enrich its image to consumers’ point of view

Proposta metodológica para a correção do coeficiente de retorno de esgoto sanitário em unidades com sistemas de aproveitamento de água pluvial

The use of rainwater for non-potable purposes generates a reduction in the consumption of treated water, however, this reduction is not observed in the generation of wastewater, as this is independent of the water source. In Brazil, the pricing on the services of collection and treatment of sewage, in general, is based on the coefficient of return of the sewage disposal system, which has a relation sewer / water proportional to the consumption of treated water measured at the consumer unit. The use of rainwater originating from utilization systems infer on the coefficient, underestimating the volume of wastewater generated. Therefore, this study presents a methodology for setting the coefficient of return. Different roof areas, reservoir volumes and rates of water consumption situations were simulated. The behavior of adjustment of the coefficient of return were also analyzed for the average area per capita roof (m² / inhabitant) of Rio Claro - SP. As a result, it can be seen that the adjustment of the coefficient of return is directly proportional to the increase of the roof areas and the volumes of reservoirs, and inversely proportional to the total water demand. The corrected coefficient of return showed the minimum value of 0.83 and a maximum value of 1.45, this variation corresponds to the maximum ratio between the demands of total water and rainwater, since the exploitation of rain water should be used only for non-potable uses, according to NBR 15527 / 07. To the municipality of Rio Claro - SP was noted an adjustment of the coefficient of return ranging from 0.99 to 6.61

Diagnóstico e proposição de subsídios para a elaboração de plano de gestão ambiental: estudo de caso de um abatedouro avícola

In view of the current environmental concerns and legal requirements, this work aims to achieve a diagnosis and offer subsidies for development of an environmental management plan in an industry. The industry considered to be a subject of study of this research is the aviculture, considered its great importance in Brazil and to present a significant environmental impact. The unit of analysis is a chicken slaughterhouse, located in Rio Claro, SP. The developed methodology for identification and analysis of environmental significative aspects were based in the concepts of environmental impact and in the ABNT NBR ISO 14.001:2004. From the analysis of selected aspects, this research proposed several environmental indicators for the company and identified points of environmental improvement. The results of this study provide methods for identifying its environmental aspects and development of its environmental management plan to chicken slaughterhouse and also to other companies.

Análise da influência do torque de montagem na resistência de parafusos de fixação

Whereas the assembly torque calculation has great importance on efficiency and life of bolts, the objective of this study was to analyze the combined stresses during assembly, the friction coefficient, compare the rupture torque results with the indicated torques by standards and to present a new torque method without the stress combination (shear stress and normal stresses). For this study were carried eighteen tests with different diameters and materials, this bolts were undergoing five ranges torque until the breaking torque. With the experimental rupture torque values for each test and with the bolt quality certificate was possible to calculate the friction coefficient so compared with the theory. Another comparison was the experimental rupture torque with assembly torque indicated by NBR-8800 and ASME-PCC. The main conclusion are related to combined stress, because for this factor can fail at the assembly time, so for in some cases must use the tensioning method, because in this method won't be present torsional stresses

Proposta de sistemática operacional para implantação de sistemas de gestão ambiental em empreendimentos industriais

The implantation of environmental management systens (SGA) in companies is the first step to the company conquers the environmental certification and consequently the benefits of a sustainable production of products, services and activities can bring. However, in the way as they are proposals in bibliographies the implantation of the SGAs, does not identify the definition of the operational stages of implementation of the same ones, generating doubts on the real environmental and administrative performance that they can come to generate for the organization. In this direction, the present research brings a proposal of operational systematics for implantation of SGA in companies, detailing each stage of implantation, considering its particularitities. For in such a way, a revision of norm NBR ISO 14001:2004 was made, looking for to identify to the interpretation imperfections gifts in the normative system. Moreover, other methods of SGA implantation had been searched gifts in the bibliography, searching proposals that detailed the operational aspects of the implantation of the system. In the same way, the accomplishment of a period of training supervised in the first semester of 2007 made possible the practical experience of the functioning of a system of environmental management, beyond the contact with professionals of the area and the acquisition of documents that had helped in the development of the research. The result was the attainment of a detailed procedure more, defining the operational systematic of SGA implantation, beyond the generation of a flowchart, describing as to develop each stage. This detailing certainly will facilitate the implantation of a SGA in companies interested in improving its environmental performance.

Rerrefino de óleo lubrificante usado

The lubricant oil used in engines of internal combustion must be, periodically, changed. Its mainly function in the engines is to reduce the friction between the pieces, but its presence also promotes the cleanness and the refrigeration of the equipment. These attributions, at the end of some cycles of operation, make the oil to be dirty, that is, full of contaminating substances such as water, gasoline, diesel, additives, oxidized hydro-carbons and rests of metals, not being recommended, therefore, its discarding in the environment. Thus, all the used lubricant oil that leaves the automobiles engine has been thrust, waiting for a solution. The pollution generated by the discarding of a ton of used oil per day in the soil or in the rivers is equivalent to a domestic sewer of 40 thousand of people. The indiscriminate burning of the used lubricant oil generates significant emissions of metallic oxides, besides other toxic gases, like the dioxin and sulphur oxides. In this context, the mean objective of this essay was to effectuate the rerrefine of the used lubricant oil, aiming the increase of its life cycle and consequently contributing for the reduction of the environmental pollution. According to the used process, it was possible to get a rerrefine oil, of good quality, which physicistchemistries properties are in compliance with the norms of NBR and ASTM

Desenvolvimento de um protetor lateral em alumínio

In view of the need to develop a device for security and lateral protection, due to the Resolution 323/09 of CONTRAN, which requires the use of such equipment for most trucks and tow trucks, the objective of this work is to develop a project for an aluminum lateral protection device, according to the ABNT NBR 14.148 regulation, that, among many specifications, stipulates that the equipment must support a load of 5 kN and suffer a maximum deflection of 30mm, but does not say what material it should be made of. The reason for choosing aluminum is because of its low density, so as not to significantly increase the curb weight of the truck, which, consequently, reduces CO2 emissions and maintenance expenses. Additionally, this material presents a good resistance/weight ratio, high resistance to corrosion, excellent surface finish and it's fully recyclable; reason why it has been gaining the attention of many industry segments. For the realization of the project, profiles were chosen to make the assembly of the set, and then a finite elements analysis was performed in the HyperWorks software, to verify if the designed device would support the loads stipulated by the regulation. One details to note is that these simulation programs could show inaccuracies, because of the size and shape of the elements that compose the mesh, and for many other reasons, so it is necessary that, even with the results coming back satisfactory, actual physical tests are conducted to validate the proper functioning of the equipment, which was not done for this study

Análise de características físicas de agregados de resíduos de construção e demolição, para fins de pavimentação

This work presents the results obtained in analyzes of aggregates from construction and demolition waste produced by the plant of the City of Guaratinguetá. Using this data and comparing with the specifications of NBR 15115, it was found that the materials do not possess the requisite minimum characteristics to be utilized as a basis for low-pavement traffic. In order to identify the main reasons of the material does not fit in the standard, we used the data obtained in a study conducted by Professor. Dr. Luiz Eduardo de Oliveira at the plant of the company AB Environmental Solutions Ltd., located in Pindamonhangaba. With different characteristics, the aggregates from construction and demolition waste produced by this plant showed the possibility of using pavements. The use of these residues in paving reduces the impact on the environment caused by construction.

Obtenção de constantes elásticas da madeira de duas espécies de Pinus sp

There are many studies about longitudinal modulus of elasticity of wood, but you can´t say the same of transverse modulus, especially for conifers. The study aimed to characterize and compare the species Pinus elliottii var. elliottii and Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid), and the longitudinal modulus of elasticity (E) and lateral (G) in bending, to analyze the modulus of elasticity in different spaces and to verify the species studied the ideal range is equal to 21 times the height of the specimen, as prescribed in the normative document NBR 7190/1997, as well as analyzing the relationship G = E/20 defined in the normative document NBR 7190/1997. The wood came from the farm located in Paranapanema, split at the mill São José and the rest of the work was conducted at the Experimental Itapeva Campus - UNESP. Were removed fourteen specimens of each species. The average values of the modulus of elasticity and cross were, respectively, 5828 MPa and 452 MPa for Pinus elliottii var. elliottii and 6407 MPa and 320 MPa for the species of Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid). The trend lines for the plotted graphs showed an exponential behavior to near linear 21he will equal the constant after this value. We have found the relationship G = E/13, for Pinus elliottii var. elliottii and G = E/20 for hybrid. The results of the modulus and strength for Pinus elliottii var. elliottii and the hybrid were lower than those reported in the literature, showing that this batch inferior quality to apply to structures

Avaliação do ciclo de vida dos tubos de PVC produzidos no Brasil

Naturally characterizes the human being the interference in the environment to ensure their survival and also convenience. After numerous environmental accidents caused by unbridled pursuit of this goal, the concern about providing for current needs without compromising the ability of the future generations to supply their own, gained space. In order to contribute to sustainable development the Life Cycle Assessment (LCA) was implemented. This tool is based on the concept that if the environmental impacts of a product or service are known, it is possible to take better decisions concerning its environmental aspects. The purpose of this research is to conduct the LCA of polyvinyl chloride (PVC), the world’s second most consumed thermoplastic. The methodology described in NBR ISO 14040 and NBR ISO 14044 was followed. As a result, the LCA of polyvinyl chloride produced in Brazil was obtained, and, therefore, the inventory of the product in question adapted to Brazilian reality. The research can be applied to various studies considering that actions were taken to ensure that it represents the Brazilian reality. Moreover, the procedures were described to guarantee the greatest transparency possible

Estudo comparativo de dois tipos de painéis de MDP: com adição de papel impregnado e lâminas de bambu

This work is the production of two types of particle boards reconstructed MDP (Medium Density Particleboard), the first with the addition, in the inner layer of particles of impregnated paper, the ratios of 0%, 1%, 5% and 20 %. In the second type of panel MDP was inserted with blades of bamboo species Dendrocalumus giganteus as coatings and structural reinforcement. The MDP panel, used as a basis for both cases has the composition of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending, tension parallel and perpendicular, and testing of particle sizes of the particles did not exists in standard references. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests showed similar results indicating normative specifications in a positive way, the possibility of production of MDP with the use of waste paper impregnated. As for the panel with bamboo blades, the tests showed a mechanical performance far superior to MDP market, explaining the study and possible implementation of the bamboo for use where the MDP will suffer greater mechanical stress, such as doors, tops and benches tables

Ensaio de ligações de estruturas de madeira por chapas com dentes estampados em quatro espécies da família leguminosas

In the last years, the use of industrialized systems of lattice structures of wood as an alternative in the construction processes, is becoming more popular in Brazil, mainly for their commitment to the environment.The industrialized system of wooden lattice structures consists in a production of lattice structures, composed of pieces of wood where their mechanical connections are made with the sheet multi-toothed connectors (CDE).Among the many challenges to make this system competitive, the whole system of the connections between the pieces of wood not only must show functionality, but also speed, strength, versatility and economy. Referenced at Brazilian Standard for Wood Structures (NBR 7190/1997 - Project of timber structures) the sheet multi-toothed connectors, are analyzed using three test methods: tensile strength parallel to grain, tensile strength normal to the fibers and shear strength, all of them in two positions, αCH0=0o e αCH0=90o to four types of wood: Angelim (Vatairea heteroptera Ducke); Red-Angico (Parapiptadenia rigida (Benth) Brenae); Garapa (Apuleia leiocarpa (Vog.) Macbr) and Jatoba (Hymenaea stilbocarpa Hayne), belonging to the Leguminosae family and founded in several regions of Brazil.The purpose of this manuscript consists to analyze the mechanical connections with the sheet multi-toothed connectors through tests from NBR7190/1997

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Tratamento de água pluvial para fins não potáveis com utilização de amido de milho como coagulante em filtração cíclica em escala de laboratório

The aim of the present work is to investigate a simplified rainwater treatment strategy for nonpotable use. For this, there were simulated in laboratory scale the treatment conditions of a system that employs Corn Starch as a coagulant in cyclic filtration (from 1 to 5 filtration cycles). A commercial Corn Starch in different dosages was used (0,1; 0,2; 0,4; 0,6; 0,8; 1,0; 1,5; 2,0; 2,5; 3,0; 3,5; 4,0; 4,5; 5,0; 5,5; 6,0; 6,5; 7,0; 7,5; 8,0; 8,5 e 9,0 mg/L). The NBR 15527/07 recommended parameters were monitored on the inflow and outflow and compared to different first flushes (0.5; 1.0 and 1.5mm). The obtained results indicate that the 6.0mg/L dosage presented the best results (removal efficiency of 86% of turbidity; 88% of apparent color and absent of total and faecal coliform residuals). However, it was not possible to prove the filtration cycles benefit, in laboratory scale, because for some Corn Starch dosages the water did not present better quality when increasing the number of cycles.