A aplicação da teoria do lean seis sigma na prestação de serviços no setor agrícola

This thesis aims to analyze the applicability of Lean Six Sigma and DMAIC to improve processes focused on agriculture. We discuss the origins of each system separately, Lean Manufacturing, the Toyota plants in Japan, and Six Sigma, by Motorola in the U.S., and then appears to merge them and can meet their complementarities and synergy between their tools. Finally, we describe a case study focused on the harvesting department, applicable to all types of manuals crops, covering the production of fruits, vegetables and greens. This study shows the ability to reduce costs, increase productivity and elimination of defects that the methodology developed with the fusion of Lean Manufacturing with Six Sigma allows

Atividade hipolidêmica e protetora da bixina no fígado de ratos tratados com dieta hipercalórica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Laboratório de Investigação de Paternidade FCFAr-UNESP: Histórico e Atualidades

The Laboratory of Investigation on Paternity - FCFAr-UNESP performs an outreach university activity according to 53, UNESP Resolution article 3 , published on November 3, 2004. This article is classified in Human Rights area involving community services, training highly qualified human resources and scientific development. This kind of service is performed with advanced technological resources and quality control similar to the international standard. in human identification by DNA research results are available . The laboratory offers a highly qualified service at a fair price, allowing the low-income population access to such tests.

Implantação do controle estatístico de processo: um estudo de caso em uma empresa do setor alimentício

Pós-graduação em Engenharia de Produção - FEB

Ferramentas da qualidade na colheita mecanizada de cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Análise do método suvrel na expressão diferencial a partir da matriz de contagens gerada com dados de RNA-SEQ

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genomic analysis for managing small and endangered populations: a case study in Tyrol Grey cattle

Analysis of genomic data is increasingly becoming part of the livestock industry. Therefore, the routine collection of genomic information would be an invaluable resource for effective management of breeding programs in small, endangered populations. The objective of the paper was to demonstrate how genomic data could be used to analyse (1) linkage disequlibrium (LD), LD decay and the effective population size (NeLD); (2) Inbreeding level and effective population size (NeROH) based on runs of homozygosity (ROH); (3) Prediction of genomic breeding values (GEBV) using small within-breed and genomic information from other breeds. The Tyrol Grey population was used as an example, with the goal to highlight the potential of genomic analyses for small breeds. In addition to our own results we discuss additional use of genomics to assess relatedness, admixture proportions, and inheritance of harmful variants. The example data set consisted of 218 Tyrol Grey bull genotypes, which were all available AI bulls in the population. After standard quality control restrictions 34,581 SNPs remained for the analysis. A separate quality control was applied to determine ROH levels based on Illumina GenCall and Illumina GenTrain scores, resulting into 211 bulls and 33,604 SNPs. LD was computed as the squared correlation coefficient between SNPs within a 10 mega base pair (Mb) region. ROHs were derived based on regions covering at least 4, 8, and 16 Mb, suggesting that animals had common ancestors approximately 12, 6, and 3 generations ago, respectively. The corresponding mean inbreeding coefficients (F ROH) were 4.0% for 4 Mb, 2.9% for 8 Mb and 1.6% for 16 Mb runs. With an average generation interval of 5.66 years, estimated NeROH was 125 (NeROH>16 Mb), 186 (NeROH>8 Mb) and 370 (NeROH>4 Mb) indicating strict avoidance of close inbreeding in the population. The LD was used as an alternative method to infer the population history and the Ne. The results show a continuous decrease in NeLD, to 780, 120, and 80 for 100, 10, and 5 generations ago, respectively. Genomic selection was developed for and is working well in large breeds. The same methodology was applied in Tyrol Grey cattle, using different reference populations. Contrary to the expectations, the accuracy of GEBVs with very small within breed reference populations were very high, between 0.13-0.91 and 0.12-0.63, when estimated breeding values and deregressed breeding values were used as pseudo-phenotypes, respectively. Subsequent analyses confirmed the high accuracies being a consequence of low reliabilities of pseudo-phenotypes in the validation set, thus being heavily influenced by parent averages. Multi-breed and across breed reference sets gave inconsistent and lower accuracies. Genomic information may have a crucial role in management of small breeds, even if its primary usage differs from that of large breeds. It allows to assess relatedness between individuals, trends in inbreeding and to take decisions accordingly. These decisions would be based on the real genome architecture, rather than conventional pedigree information, which can be missing or incomplete. We strongly suggest the routine genotyping of all individuals that belong to a small breed in order to facilitate the effective management of endangered livestock populations.

Genome-wide association study of reproductive traits in Nellore heifers using Bayesian inference

An important goal of Zebu breeding programs is to improve reproductive performance. A major problem faced with the genetic improvement of reproductive traits is that recording the time for an animal to reach sexual maturity is costly. Another issue is that accurate estimates of breeding values are obtained only a long time after the young bulls have gone through selection. An alternative to overcome these problems is to use traits that are indicators of the reproductive efficiency of the herd and are easier to measure, such as age at first calving. Another problem is that heifers that have conceived once may fail to conceive in the next breeding season, which increases production costs. Thus, increasing heifer's rebreeding rates should improve the economic efficiency of the herd. Response to selection for these traits tends to be slow, since they have a low heritability and phenotypic information is provided only later in the life of the animal. Genome-wide association studies (GWAS) are useful to investigate the genetic mechanisms that underlie these traits by identifying the genes and metabolic pathways involved. Data from 1853 females belonging to the Agricultural Jacarezinho LTDA were used. Genotyping was performed using the BovineHD BeadChip (777 962 single nucleotide polymorphisms (SNPs)) according to the protocol of Illumina - Infinium Assay II ® Multi-Sample HiScan with the unit SQ ™ System. After quality control, 305 348 SNPs were used for GWAS. Forty-two and 19 SNPs had a Bayes factor greater than 150 for heifer rebreeding and age at first calving, respectively. All significant SNPs for age at first calving were significant for heifer rebreeding. These 42 SNPs were next or within 35 genes that were distributed over 18 chromosomes and comprised 27 protein-encoding genes, six pseudogenes and two miscellaneous noncoding RNAs. The use of Bayes factor to determine the significance of SNPs allowed us to identify two sets of 42 and 19 significant SNPs for heifer rebreeding and age at first calving, respectively, which explain 11.35 % and 6.42 % of their phenotypic variance, respectively. These SNPs provide relevant information to help elucidate which genes affect these traits.

Validation of HPLC-UV assay of caffeic acid in emulsions

An accurate, sensitive, precise and rapid reversed-phase high-performance liquid chromatographic method was successfully developed and validated for the determination of caffeic acid (CA) in emulsions. The best separation was achieved on a 250 × 4.6 mm, 5.0 µm particle size RP18 XDB Waters column using ethanol and purified water (40:60 v/v) adjusted to pH 2.5 with acetic acid as the mobile phase at a flow rate of 0.7 mL/min. Ultraviolet detection was performed at 325 nm at ambient column temperature (25°C). The method was linear over the concentration range of 10-60 µg/mL (r(2) = 0.9999) with limits of detection and quantification of 1.44 and 4.38 µg/mL, respectively. CA was subjected to oxidation, acid, base and neutral degradation, as well as photolysis and heat as stress conditions. There were no interfering peaks at or near the retention time of CA. The method was applied to the determination of CA in standard and pharmaceutical products with excellent recoveries. The method is applicable in the quality control of CA.

Efeito da adição de açúcares e do processo de envelhecimento na qualidade sensorial de amostras de cachaça obtidas tradicionalmente e por redestilação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Extrinsic factors affecting water absorption in chilling of broiler chicken carcasses

Brazil occupies an outstanding position as a producer and exporter of chicken meat, and the maintenance and expansion of this position require a constant evolution, especially in variables which determine quality. An important quality parameter of poultry meat is the amount of water absorbed by the carcass during processing. In Brazil, carcasses chilling is done by immersion in chilled water. In this process, the carcass is rehydrated and the water lost during transport and initial operations is replaced. At this stage, some care is needed to prevent the absorption of water upper than the level allowed by Brazilian law. This project aimed to evaluate extrinsic factors that can influence the absorption of water by the chicken meat. For this, 144 Cobb chickens divided into 24 groups of six birds were used. At 42 days of age, one chicken of each group, with weight ranging up to 10% more or less from the average of the group, was slaughtered in an experimental pilot scale abattoir where slaughter procedures were conducted under strictly controlled conditions. The chilling procedure was performed following a completely randomized design with factorial arrangement 3x2, where the factors were: three temperatures in the first section of the chilling system (4, 10 and 16ºC) and two degrees of water hardness (hard and soft water), with six treatments and four replications. Brazilian law provides that the water temperature in the first section of the chiller must not be higher than 16ºC, and the length of the carcasses in this section shall not exceed 30 minutes. All carcasses remained in the first section of the chiller for 30 minutes and then were transferred to another tank with water at 4ºC, remaining there until reaching 7ºC. The carcasses were weighed before and after chilling, to evaluate the percentage of water absorbed. The water absorption was influenced by the initial temperature of the water in the chiller and by the water hardness. When initially immersed in water at 4ºC, carcasses water absorption averaged 2.70%, a significantly lower absorption than the values found for the carcasses that were initially immersed in water at 16ºC, 3.83% (p<0.05). The carcasses immersed in water at 10ºC had mean water absorption of 3.66%, not differing from the means observed in the other two treatments (p>0.05). In hard water, the average water absorption was 2.46% and, in soft water, 4.33% (p<0.05). In all treatments, the water absorption did not exceed the limit established by Brazilian legislation, which is a maximum of 8%. This information is important to control the absorption of water by carcasses in chicken meat processing, preventing consumers from being harmed.

Development and validation of a rapid turbidimetric assay to determine the potency of ampicillin sodium in powder for solution for injection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extending lean manufacturing in supply chains: a successful case in Brazil

Purpose – The purpose of this paper is to present the results of a success story involving the extending of lean manufacturing practices between a focal firm and its supplier, both located in Brazil, thereby configuring a case of excellence. Design/methodology/approach – An in-depth case study was conducted involving two companies: Company A, focal, leader in its segment, located in Brazil; and Company B, Company A's supplier, also located in Brazil. Findings – Results indicate there are several mechanisms for extending lean manufacturing practices in the supply chain, such as workshops, training, and integrated teams. These mechanisms are shown and guidelines are also introduced for companies seeking to successfully extend lean manufacturing practices. Originality/value – An original use of define, measure, analyze, improve, control for structuring the extending of lean manufacturing practices to suppliers and, consequently, the importance of the lean six-sigma relationship in this context. Furthermore, the guidelines introduced serve as a benchmark for other companies interested in the topic.

Desenvolvimento de procedimentos e métodos analíticos no campo forense aplicando os princípios da química verde

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da produção e qualidade físico-química de méis produzidos no Estado de Pernambuco

The present study had as objective contribute to the characterization of beekeeping in the Pernambuco State and evaluate the physical-chemical quality of the honeys produced in the region. For this, was applied a directed formulary to the representative organ of beekeeping class aboutthe productives and technicals aspects of beekeepers. Was obtained 14 samples of honey by Apis mellifera africanized, stored in sterile plastic vessels was sent to the Beekeeping Products Quality Control Laboratory (CEA-UNITAU). Was observed that the most of beekeepers have of 50 to 100 hives (57,14%), 28,57% of 100 to 200 hives and 14,28% more than 500 hives, being that 85,71% produce 30 to 50 kg honey/hives/flowering. All use the standard hive Langstroth and 85,71% obtain their swarm by capture. About the physical-chemical quality of the honey, was observed that moisture content varied from 18,2% to 22,0%, with mean value of 19,80±1,11; the water activity varied from 0,70 to 0,84 aw, with mean value of 0,79±0,05 aw; the total acidity was 24,91±8,99 meq/kg and the average index of hydroxymethylfurfural was 16,32±17,88 meq/kg. The results obtained are according to the quality limits established by the brazilian legislation, excepted the water activity that exceeded the maximum limit of 0,65 aw. The datasobtained in this paper shows the development of beekeeping in Pernambuco State and the honey presents nice quality.