Genetic variation within and among species of five sections of the genus Arachis L. (Leguminosae) using RAPDs

Some Arachis species are widely used as commercial plants, e.g. the groundnut A. hypogaea, an important source of good quality protein and oil, and A. pintoi and A. glabrata, that are utilized as forage species. Germplasm of most Arachis species is available in germplasm banks. However, little it is known about the genetic attributes of this germplasm, and mainly about its genetic variability, which is very important for its maintenance. In the present study RAPDs were used to assay the genetic variation within and among 48 accessions of five sections of the genus Arachis and to establish the genetic relationships among these accessions. Ten of 34 primers tested were selected for DNA amplification reactions since they yielded the largest numbers of polymorphic loci. A dendrogram was constructed based on data from the 10 primers selected. Eighty RAPD polymorphic bands were analyzed among the accessions studied. The relationships among species based on RAPDs were similar to those previously reported based on morphological, cytological and crossability data; demonstrating that RAPDs can be used to determine the genetic relationships among species of the different sections of the genus Arachis. In general, wide variation was found among accessions and low variation was found within the accessions that had two or more plants analyzed. However, higher polymorphism was found in the section Trierectoides and in one accession of A. major, indicating that generalizations should be avoided and each species should be analyzed in order to establish collection and maintenance strategies.

Structure of the spermatheca in five families of isoptera

The structure of the spermatheca was investigated in specimens of five termite families with the aid of light microscopy. In longitudinal section, the spermatheca of Zootermopsis nevadensis (Termopsidae) showed the shape of an umbrella with a secretory portion and duct. The other termite species, which belong to the families Kalotermitidae, Serritermitidae, Rhinotermitidae and Termitidae showed a spermatheca constituted only by the secretory portion. This structure was an elongate, fingerlike tube with a recurved and blind extremity. The spermatheca wall was composed of a single epithelium formed by class 3 secretory cells with a lumen lined by cuticle. The cuticle was thin and smooth or thick with digitiform projections in the species examined. All the termite females showed bundles of musculature outside of the spermatheca.

Farming technology, biochemistry characterization, and protective effects of culinary-medicinal mushrooms Agaricus brasiliensis S. Wasser et al. and Lentinus edodes (Berk.) Singer: Five years of research in Brazil

The biotechnology, biochemical characterization, and protective effects of the himematsutake and shiitake mushrooms were studied for the Thematic Project, from 1998 to 2003. A new species, Agaricus Brasiliens is Wasser et al. (= A. blazei Murrill ss. Heinem.), was proposed for the cultivated lineages in Brazil. Interactions among lineages, substrates, casing layers, and fructification inductions (temperature alternations) significantly increased the productivity of A. brasiliensis in Brazil (from 40 g to 200 g of fresh mushroom kg -1 moist compost). However, pests and diseases (mainly Sciaridae flies and false truffle), drastically reduced the productivity of A. brasiliensis (below 50 g kg -1). Biochemically for each mushroom species, the polar extracts, no polars, and medium polarity presented the same organic substances; however, their concentrations differed as a result of the lineages, maturation of the fruit bodies, and cultivation conditions. In this aspect, concentration of linoleic acid in A. brasiliensis (added to animal food) was related directly to the chemical protection against carcinogenic drugs in mice. Aqueous extracts of Lentinus edodes (= Lentinula edodes (Berk.) Pegler) and A. brasiliensis may be preventive chemical protectors against mutagenic and carcinogenic drugs, depending on the lineage and extraction method (tea or juice). However, immunomodulator effects and tumor reduction were only observed with concentrated fractions (hexanic, methanolic, and ATF extracts). Aqueous extracts of A. brasiliensis and L. edodes have antibiotic-like substances and substances able to act as elicitors of resistance responses in some plants (local and systemic) and show a potential to be used in the alternative control of plant pathogens. © 2005 by Begell House, Inc.

The frequency of pharmacological pain relief in university neonatal intensive care units

Objective: To evaluate the use of drugs to relieve the pain of invasive procedures newborn infants cared for at a university hospital NICU. Methods: A prospective cohort study of all newborn infants hospitalized in four NICU during October 2001. The following data were collected: demographic data of the hospitalized newborn infants; clinical morbidity; number of potentially painful procedures and frequency of analgesic administration. Factors associated with the use of analgesia in this cohort of patients were studied by multiple linear regression using SPSS 8.0. Results: Ninety-one newborn infants were admitted to the NICU during the study period (1,025 patient-days). Only 25% of the 1,025 patient-days received systemic analgesia. No specific drugs were administered to relieve acute pain during any of the following painful events: arterial punctures, venous, capillary and lumbar punctures or intubations. For chest tube insertion, 100% of newborn infants received specific analgesia. For the insertion of central catheters 8% of the newborn infants received painkillers. Only nine of the 17 newborn infants that underwent surgical procedures received any analgesic dosage during the postoperative period. For 93% of patients under analgesia the drug of choice was fentanyl. The presence of mechanical ventilation increased the chance of newborn infants receiving painkillers by 6.9 times and the presence of chest tube increased this chance by five times. Conclusion: It is necessary to train health professionals in order to bridge the gap between scientific knowledge regarding newborn infant pain and clinical practice. Copyright © 2005 by Sociedade Brasileira de Pediatria.

Bioaerossóis bacterianos em um hospital

Microbial contamination of an enclosed area may come from outside or be generated within the area itself. In the study described here, bioaerosol levels in hospital air were quantified and related to those found in the air outside, taking into account some of the environmental variables that affect air quality, such as the number of occupants of a room and the type of ventilation. Airborne bacteria were collected for five minute by blowing air at 500 L min -1 in high speed jets on to the surface on plates culture in a single-stage bioaerosol impactor. The mean viable count of bacteria in the air outside in the hospital, São Paulo State, was 77 ± 4 CFU m -3, while in the air inside the hospital it was 302 ± 260 CFU m-3. The operating theatre was the only space sampled with a controlled environment and, after orthopedic surgery, it had the highest bioaerosol count recorded (867 ± 482 CFU m-3). In the enclosed environments, nine bacterial species were identified. Despite the difficulty in establishing precise numbers of bacteria in the bioaerosols in hospital environments, the values obtained demonstrate a need to instigate suitable programs to keep the microbial density low in these environments, and eliminate microorganisms presenting a significant risk to their occupants. It is also recommended that such programs include the monitoring of hospital air, with the aim of defining standards for acceptable numbers of bacteria in the bioaerosol.

Active control in flexible plates with piezoelectric actuators using linear matrix inequalities

The study of algorithms for active vibrations control in flexible structures became an area of enormous interest, mainly due to the countless demands of an optimal performance of mechanical systems as aircraft, aerospace and automotive structures. Smart structures, formed by a structure base, coupled with piezoelectric actuators and sensor are capable to guarantee the conditions demanded through the application of several types of controllers. The actuator/sensor materials are composed by piezoelectric ceramic (PZT - Lead Zirconate Titanate), commonly used as distributed actuators, and piezoelectric plastic films (PVDF-PolyVinyliDeno Floride), highly indicated for distributed sensors. The design process of such system encompasses three main phases: structural design; optimal placement of sensor/actuator (PVDF and PZT); and controller design. Consequently, for optimal design purposes, the structure, the sensor/actuator placement and the controller have to be considered simultaneously. This article addresses the optimal placement of actuators and sensors for design of controller for vibration attenuation in a flexible plate. Techniques involving linear matrix inequalities (LMI) to solve the Riccati's equation are used. The controller's gain is calculated using the linear quadratic regulator (LQR). The major advantage of LMI design is to enable specifications such as stability degree requirements, decay rate, input force limitation in the actuators and output peak bounder. It is also possible to assume that the model parameters involve uncertainties. LMI is a very useful tool for problems with constraints, where the parameters vary in a range of values. Once formulated in terms of LMI a problem can be solved efficiently by convex optimization algorithms.

In vitro antimicrobial activity of different gutta-percha points and calcium hydroxide pastes

The aim of this study was to evaluate the antimicrobial activity of different trademarks and compositions of gutta-percha points and calcium hydroxide pastes used in endodontic therapy. The evaluated material consisted of gutta-percha points containing calcium hydroxide (Roeko™), gutta-percha points containing chlorhexidine (Roeko™), two convencional gutta-percha points (Endo Points™ and Roeko™) and two calcium hydroxide pastes (Calen™ and Calen/PMCC™). Antimicrobial tests included five species of microorganisms: Escherichia coli (ATCC10538), Staphylococcus epidermidis (ATCC12228), Staphylococcus aureus (ATCC6538), Pseudomonas aeruginosa (ATCC27853), and Micrococcus luteus (ATCC9341). The Agar difusion method was employed. The plates were kept at room temperature for 2 h for prediffusion and then incubated at 37°C for 24 h. The triphenyltetrazolium chloride gel was added for optimization and the zones of inhibition were measured. Statistical evaluation was carried out using analysis of variance and Tukey Test. The obtained results showed that all microbial species used in the study were inhibited by the gutta-percha points containing chlorhexidine and by the calcium hydroxide pastes (Calen™ and Calen/ PMCC™), with similar results (p > 0.05). No antimicrobial activity was observed for the other groups. It was concluded that the gutta-percha points containing chlorhexidine presented antimicrobial activity, whereas the gutta-percha points containing calcium hydroxide did not.

Finite element analysis of warpage in laminated aluminium alloy plates for machining of primary aeronautic parts

The aim of this paper consists in presenting a method of simulating the warpage in 7xxx series aluminium alloy plates. To perform this simulation finite element software MSC.Patran and MSC.Marc were used. Another result of this analysis will be the influence on material residual stresses induced on the raw material during the rolling process upon the warpage of primary aeronautic parts, fabricated through machining (milling) at Embraer. The method used to determinate the aluminium plate residual stress was Layer Removal Test. The numerical algorithm Modified Flavenot Method was used to convert layer removal and beam deflection in stress level. With such information about the level and profile of residual stresses become possible, during the step that anticipate the manufacturing to incorporate these values in the finite-element approach for modelling warpage parts. Based on that warpage parameter surely the products are manufactured with low relative vulnerability propitiating competitiveness and price. © 2007 American Institute of Physics.

Effects of Coffea arabica on Streptococcus mutans adherence to dental enamel and dentine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of crude protein, crude fiber and crude fat in twenty-five genotypes of kale (B. oleracea var. acephala)

The aim of the study was to determine the percentage of crude protein, crude fiber and crude fat (ether extract) of 25 genotypes of kale from the Germplasm Bank of Instituto Agronômico de Campinas and of one genotype grown in the region of Jaboticabal-SP. The plants were cultivated in the field, and the leaves after collection were pre-dried in a convection oven at 65°C for 72 h. Afterward, the leaves were analyzed for crude protein, crude fiber and crude fat (ether-soluble materials). Significant differences were detected among the different genotypes for all the characteristics examined. Of the genotypes studied, six showed more than 30% crude protein: HS-20 (32.56%), Comum (31.70%), Couve de Arthur Nogueira 2 (31.16%), Pires 2 de Campinas (30.63%), Manteiga I-916 (30.36%), and Manteiga de Ribeirao Pires I-2446 (30.03%). In relation to crude fiber, the highest percentage was seen in the genotype Manteiga de Mococa (10.92%), differing significantly from the other genotypes studied. With regard to crude fat, the highest percentage was found in the genotype HS-20 (3.72%), and Pires 1 de Campinas (3.34%). Of the genotypes tested, HS-20 stood out among the others, showing both the highest percentage of protein and fat.

Population genetic data of five X-chromosomal loci in Bauru (São Paulo, Brazil)

Genetic population data for five X-STR (DXS6854, DXS7424, DXS101, DXS6808 and DXS7132) were obtained from Bauru population (São Paulo, Brazil). No deviations from the Hardy-Weinberg equilibrium were observed, with the exception of DXS101. The combined powers of discrimination in males and females were 0.99897253 and 0.99999120, respectively. These high values show the potential of this system in human identification and paternity testing. © 2008 Elsevier B.V. All rights reserved.

Effectiveness of six different disinfectants on removing five microbial species and effects on the topographic characteristics of acrylic resin

Purpose: The aim of this study was to evaluate the effectiveness of disinfectant solutions (1% sodium hypochlorite, 2% chlorhexidine digluconate, 2% glutaraldehyde, 100% vinegar, tabs of sodium perborate-based denture cleanser, and 3.8% sodium perborate) in the disinfection of acrylic resin specimens (n = 10/group) contaminated in vitro by Candida albicans, Streptococcus mutans, S. aureus, Escherichia coli, or Bacillus subtilis as measured by residual colony-forming unit (CFU). In a separate experiment, acrylic resin was treated with disinfectants to monitor potential effects on surface roughness, Ra (μm), which might facilitate microbial adherence. Materials and Methods: Three hundred fifty acrylic resin specimens contaminated in vitro with 1×10 6 cells/ml suspensions of standard strains of the cited microorganisms were immersed in the disinfectants for 10 minutes; the control group was not submitted to any disinfection process. Final counts of microorganisms per ml were performed by plating method for the evaluation of microbial level reduction. Results were compared statistically by ANOVA and Tukey's test (p ≤ 0.05). In a parallel study aiming to evaluate the effect of the tested disinfectant on resin surface, 60 specimens were analyzed in a digital rugosimeter before and after ten cycles of 10-minute immersion in the disinfectants. Measurements of superficial roughness, Ra (μm), were compared statistically by paired t-test (p ≤ 0.05). Results: The results showed that 1% sodium hypochlorite, 2% glutaraldehyde, and 2% chlorhexidine digluconate were most effective against the analyzed microorganisms, followed by 100% vinegar, 3.8% sodium perborate, and tabs of sodium perborate-based denture cleanser. Superficial roughness of the specimens was higher after disinfection cycles with 3.8% sodium perborate (p = 0.03) and lower after the cycles with 2% chlorhexidine digluconate (p = 0.04). Conclusion: Within the limits of this experiment, it could be concluded that 1% sodium hypochlorite, 2% glutaraldehyde, 2% chlorexidine, 100% vinegar, and 3.8% sodium perborate are valid alternatives for the disinfection of acrylic resin. © 2008 by The American College of Prosthodontists.

Antimicrobial activity of endodontic sealers based on calcium hydroxide and MTA.

The aim of this study was to evaluate the antimicrobial activity of a new root canal sealer containing calcium hydroxide (Acroseal) and the root canal sealer based on MTA (Endo CPM Sealer), in comparison with traditional sealers (Sealapex, Sealer 26 and Intrafill) and white MTA-Angelus, against five different microorganism strains. The materials and their components were evaluated after manipulation, employing the agar diffusion method. A base layer was made using Müller-Hinton agar (MH) and wells were made by removing agar. The materials were placed into the wells immediately after manipulation. The microorganisms used were: Micrococcus luteus (ATCC9341), Staphylococcus aureus (ATCC6538), Pseudomonas aeruginosa (ATCC27853), Candida albicans (ATCC 10231), and Enterococcus faecalis (ATCC 10541). The plates were kept at room temperature for 2 h for prediffusion and then incubated at 37 degrees C for 24 h. The results showed that Sealapex and its base paste, Sealer 26 and its powder, Endo CPM Sealer and its powder, white MTA and its powder all presented antimicrobial activity against all strains. Intrafill and its liquid presented antimicrobial activity against all strains except P. aeruginosa and Acroseal was effective only against M. luteus and S. aureus.

Verificação da atividade antibacteriana de sabonete líquido contendo extrato glicólico de Dimorphandra mollis Benth.

Dimorphandra mollis Benth., Compositae, false barbatimão, has been used topically as a healing, astringent and antibacterial. In this study, antibacterial activity was verified on liquid soap containing glycolic extract of D. mollis (DGE) at different concentrations (8, 15 and 20%) and at different pH levels (6 and 8). Five soap formulations (F) were prepared: F1 - tryclosan (0.1%), F2 - DGE (8%), F3 - DGE (15%), F4 - DGE (20%) and F5 - without preservatives. Bark of D. mollis were dried in a circulating air oven and ground. The rude extracts were prepared by turbo extraction with ethanol. After screening, the extract were concentrated in rotating evaporator, lyophilized and resuspended in propileneglycol to obtain the glycolic extract. The antimicrobial activity was verified by diffusion in agar method, using cylinder in plate. Plates containing Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli were incubated at 37°C for 24 hours. After incubation, the results were analysed with a pachymeter, observing the bacterial grouth inhibition halo diameter. It was verified that the liquid soap containing tryclosan caused on inhibition of bacterial growth at both pH levels; the soaps without preservatives and containing DGE, independently of the concentration and pH levels used, did not present antibacterial activity.

Development of a micro heat exchanger made with ceramic multi-layers (LTCC) and its setup to gas flow measurements

A green ceramic tape micro heat exchanger was developed using LTCC technology. The device was designed by using a CAD software and 2D and 3D simulations using a CFD package (COMSOL Multiphysics) to evaluate the fluid behavior in the microchannels. The micro heat exchanger is composed of five thermal exchange plates in cross flow arrangement and two connecting plates; heat exchanger dimensions are 26 × 26 × 6 mm3. Preliminary tests were carried out to characterize the device both in atmospheric pressure and in vacuum. The same techniques used in vacuum technology were applied to check the rotameters and to prevent device leakages. Thermal performance of the micro heat exchanger was experimentally tested. © 2009 Elsevier B.V. All rights reserved.