540 resultados para Fluido ruminal
Resumo:
The objectives of this study were to evaluate the characteristics of ruminal fluid, blood gas analysis, pedometer activity and suclinical laminitis occurrence, through the presence of secondary foot diseases in high production dairy cows, from a commercial herd. 200 Holstein cows originating from the same farm, located in Araçatuba/SP, Brazil, were divided into four groups, which are established from the daily milk production. Initially clinical examination of the cows was procedure, followed by sampling of rumen fluid, by esophageal tube. Fluid was evaluated for pH, color, odor, consistency, sedimentation, flotation and methylene blue reduction test. Venous blood samples were also collected for blood gas analysis, in addition to collecting data from pedometrics (number of steps) and daily milk production. Data were tabulated and submitted to correlation analysis. No animal had reported changes in rumen pH. Non-acid base imbalance were found, since the values of blood pH, PCO2, TCO2, HCO3- and BE were normal during hemogasimetric analysis. The pedometric was effective as a screening method to cows with foot diseases. It demonstrated reduction in the number of steps due to pain, correlated with lower milk production. However, the identification of foot lesions was only possible through specific digital clinical examination. The occurrence of 49.5 % of herd foot problems was due to the risk factors present in the farm. The abrasive concrete and inadequate facilities, also associated with the possible occurrence of sub-acute ruminal acidosis, were observed as risk factors. However, sub-acute ruminal acidosis was undiagnosed by the methods used. The correlation between the values of ruminal pH, and blood gas analysis pedometrics showed efficient for the early diagnosis of foot diseases and also in establishing the etiology of these diseases. Subclinical laminitis occurred primarily in cow's herd, considering the multifactorial etiology of this disease, occurrence and distribution of foot diseases diagnosed.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective this work was to evaluate the degradation, fermentation and kinetics of passage rumen fluid en sheep fed diets containing different carbohydrate associated with the oil. Four rumen cannulated sheep were allotted in 4 x 4 latin square. The treatments consisted of diets with high neutral detergent soluble fiber and diets with high starch associated or not with 4,2% of oil. Incubation times were 3, 6, 12, 24, 48, 72, 96 and 120 hours and ruminal fluid was collected at 0, 2, 4, 6, 8, 10, 12, and 24 hours after feeding. Diets high neutral detergent fiber soluble resulted in greater degradation of dry matter, crude protein, neutral detergent fiber soluble and starch, and higher pH values, butyric acid production, dilution rate and ruminal recycling compared with diets high starch content. The inclusion of 4,2% oil the different carbohydrate sources had no influence on the fermentation kinetics and degradation of the fiber. High content of neutral detergent soluble fiber in the diet favors the ruminal fermentation compared to the high starch content.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Zootecnia - FCAV
Resumo:
Pós-graduação em Odontologia - FOAR
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Objective To determine the effects of the administration of subconjunctival 1% atropine (SA), topical 1% atropine (A), 0.5% tropicamide (T), 1% homatropine (H), 10% phenylephrine (P), and 2% ibopamine (I) on intraocular pressure (IOP), pupil diameter (PD), ruminal motility (RM) and intestinal motility (IM) in sheep.Animal studied Ten spayed ewes of Santa Ines breed.Procedures Six experiments were performed separately at 1-week intervals. One eye was randomly selected and received one drop of A, T, H, P, I, or subconjunctival injection of atropine at 8 a. m. On the following days, IOP and PD were evaluated every 8 h until the pupil returned to its normal diameter. Ruminal motility and intestinal motility were evaluated only within the first 13 h.Results The IOP did not change significantly in the treated eyes compared with the control eyes and baseline at any time point (P > 0.05). A longer-lasting pupil dilation was observed after the administration of A (96 h), SA (79 h), H (24 h), and T (24 h). Within the first 30 min after treatment, RM and IM decreased, by 78% and 82% (H), 76% and 86% (SA), 46% and 58% (A), and 62% and 70% (T) (P < 0.001), respectively, with a tendency to return to baseline values following 13 h of drug administration. Both 10% phenylephrine and 2% ibopamine did not have any effect on the parameters evaluated (P > 0.05).Conclusions Topical and subconjunctival 1% atropine, 0.5% tropicamide, and 1% homatropine significantly reduced RM and IM, and induced pupil dilation but did not change IOP in eyes of healthy sheep. The sympathomimetics phenylephrine (10%) and ibopamine (2%) did not change the parameters evaluated.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The nickel alloys have a chemical composition with high tenor of alloy elements which are responsible for the material's mechanical and thermal properties, but also are the main causative of problems during the machining, making the process difficult. The objective of this work is the study of the machining by external cylindrical turning of the nickel based alloy Nimonic 80A, seeking the machining optimization of this alloy, seeking the best condition of lubricant fluid use, providing real increases of productivity without the need of investments in new production means. Besides, the results of this work should offer more detailed information regarding the behavior of this alloy in relation to machining by turning. The machining experiences were accomplished in a specimen of the nickel alloy, considering the machining parameters: cutting speed (75 and 90 m/min), cutting depth (0,8 mm) and feed rate (0,15 and 0,18 mm/v). The valuations were accomplished in a CNC lathe and tools with of hard metal inserts. After each stage of the turning the measures of the cutting length were accomplished, of the waste of the tools through a magnifying glass (8x) and the roughness of the specimen evaluated in each phase of the process, with the aid of a portable roughness meter. Through light optical microscopy it was possible to observe the wear of the cutting tools for each appraised condition. The roughness values, Ra and Ry, for the appraised conditions were always superiors to the theoretical values. After analysis of the results it was possible to end that, the best acting for this work strip tested it was obtained for ap=0,8mm: f=0,15mm/rev and VC=75m/min, what resulted in a larger cutting length (1811 m)
Resumo:
This work analyzed the loss of sensible heat from one fluid to be considered homogeneous heat distribution on a thermal reservoir with cylindrical geometries composite insulating layers. We studied two thermal reservoirs with a volume of 20 liters, and the first has a layer thickness of 75 mm of expanding polyurethane foam wrapped in the polycarbonate container and the second container has only layer thickness of 5 mm of polycarbonate, as insulation of fluid of the external environment. The experimental results are compared with theoretical results obtained through a calculation script, displayed and detailed during the work development, from the theory of energy balance. The maximum error introduced between the theoretical and experimental results were 3.5% and 1.4% respectively for the Boilers with or without a polyurethane coating
Resumo:
One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid
Resumo:
Pós-graduação em Ciência e Tecnologia Animal - FEIS
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)