Avaliação das dimensões e relacionamento dos arcos dentários após tratamento com Bionator de Balters

The deficiency of data in the literature took us to evaluate the Bionator of Balters appliance in the alterations of the dimensions and the relationship of the dental archs in children with malocclusion Class II, division 1 of Angle. The experimental group was constituted by 36 pairs cast Caucasians patients, aged between 7 years and 10 months - 11 years and 8 months, being 10 females and 8 males. The Levene´s test showed statistical evidences of likeness among the groups. Statistical analysis was preceded and showed significant alterations (p < 0,005) in the variable indicatives of maxillary first molars' distance, overjet, upper arch total length, upper arch anterior length, right molar relationship, left molar relationship, right canine relationship and left canine relationship. On the other hand, there wasn't significant alteration related to the lower arch and maxillary intercanines distance. The Balters' Bionator appliance had a favorable effect in the improvement of the correction of the malocclusion in Class II (foremost in molars and canines relationship) and transversal increase of the upper arch, mainly in the posterior area of arch.

Dimensões do corredor bucal e sua relação com a distância inter pré-molar e intercomissural

The objective of the study was to analyze the size of buccal corridor during the smile of individuals from 10 to 19 years of age and to determine whether there is a relationship among buccal corridor, inter premolar distance, inter commissure width. Standard digital frontal photographs in posed broad smiles and dental casts were taken of a sample of 150 individuals divided into 5 age groups of 30 individuals: 10-11 years old (G1), 12-13 years old (G2), 14-15 years old (G3), 16-17 years old (G4), 18-19 years old (G5). Distances among the cusps of superior first premolars and buccal corridors were measured for subsequent comparisons using the Image Tool 3.0 program. Data was analyzed using Anova. The SNK test and Tamhane test were applied. The mean values of the buccal corridor ranged from 4.00-to 10.69 mm on the right side and from 4.06 to 11.43 mm on the left side. In percentage related with intercomissure width each side of the buccal corridor ranged from 7.46 to 16.47% on the right side and from 7.58% to 17.61% on the left side. Buccal corridors were different between genders and increased with age. Males have bigger buccal corridors than females, but there is no difference between gender when calculated as a percentage related with the inter commissure width. The inter premolar width is significantly correlated with inter commissure widths of female individuals 14-15 years old and 18-19 years old, and with the right linear buccal corridor of males and females aged 14-15 years old.

Modificação de forma e dimensões dos arcos superior e inferior obtidas em modelos de estudo após expansão rápida da maxila com o aparelho hyrax

The aim of an orthodontic treatment is the achievement of a balanced, esthetic and, most of all, stable, intra and inter arches relationship. A common problem observed in occlusion is posterior crossbite and atresic maxilla. This problem may be treated by slow expansion, rapid expansion or surgically assisted expansion. For the present study cast models of 14 children between 7 and 11 years old were evaluated. There were 7 male and 7 female subjects that presented posterior crossbite and needed rapid maxillary expansion. The Hyrax appliance performed the therapy for correction of this transversal alteration, which is a common possibility in the treatment of this malocclusion. It was observed that the distance between the upper first molars and upper cuspids increased significantly; the length of the upper arch decreased and its perimeter increased significantly. At the lower arch there were no dimensional changes.

Efeito das dimensões dos corpos de prova na resistência à flexão de compósitos restauradores

The aim of this study was to evaluate the influence of specimen size, in comparison with the ISO Standard, on the three point flexural strength of resin composite restorative materials Filtek Supreme and Filtek Z-250. Forty specimens were fabricated for each material with the following length, width and thickness measurements (n = 10): 1) 20 × 2 × 2 mm (ISO 4049); 2) 10 × 2 × 1 mm; 3) 10 × 1 × 1 mm; 4) 8 × 0.8 × 0.8 mm. The composites were inserted in a single increment into two-piece metal device and light-polymerized. The specimens were dry stored at 37 ± 1 °C and protected from light for 7 days. After this period, flexural strength was measured by three-point flexure test using MTS 810 equipment, with a load cell of 10 kN at a speed of 0.5 mm/min. For the evaluated sizes, the results showed significant variability (p = 0.00) with values when compared with the ISO Standard (116.700 MPa), being statistically higher for the test specimens measuring 10 × 1 × 1 mm (142.530 MPa), similar for those of 10  ×  2  ×  1  mm (115.815 MPa) and lower for those of 8 × 0.8 × 0.8 mm (86.650 MPa). There was statistical equality (p = 0.08) for the studied composites (Filtek Supreme, 125.270 MPa; Filtek Z-250, 108.130 MPa). Specimens measuring 10 × 2 × 1 mm provided flexural strength values equivalent to those obtained in the sizes recommended by the ISO 4049 standard, with lower consumption of material, energy and time.

Dimensões das furcas de primeiros pré-molares superiores e sua relação com curetas periodontais

The aim of this in vitro study was to comparatively evaluate the mesio and distal furcation entrance measurements of first maxillary premolar. The measurements were compared with different curette blades. A caliper was used by an examinator to acquire the measurements of root trunk (TR); 1 mm (D1) and 2 mm (D2) both below the furcation entrance. For this study Gracey, Mini Gracey, Padua Lima (PL) and Goldman Fox 4 curettes (Millenium) were selected. Measurements of DT - total distance of the active blade length, DI - width of the active blade, DM - width of the medium part of the active blade were obtained for the curettes. The measurements were obtained in both the coronary face and in the lateral face. The data TR, D1 and D2 presented normal distribution and were statistically analyzed by paired t-test. Statistically significant differences were found in the mesial root trunk region (TR) of both premolars. The mean of the measurements was greater than the distal. Mean and standard deviation were obtained, and both Gracey and Mini Gracey showed mean measurements compatible with the closer furcation entrance (D1 - 1 mm). Goldman Fox 4 showed adaptation only in the mesial face, and Padua Lima showed no access to any of the faces. Thereby it is concluded that the access of the furcation is narrow (D1). The mesial face of the root trunk (TR) showed mean measurement greater than distal face. Gracey and Mini Gracey curettes demonstrated to be compatible for both faces, mesial and distal of the first maxillary premolars studied.

Estimativa da altura por dimensões dentárias: uma revisão da literatura

The knowledge of Forensic Anthropology is very importance in cases of identification of human remains. One phase of this process is the study of human height, which can be accomplished with relative ease when intact corpses, complete skeletons or long bones are available. However, the experience of Forensic Dentistry is essential in situations in which there is only information of the skull or of the teeth. The objective of this study was to review in the literature and evaluate works concerning the estimate of the height calculated from dental dimensions. Carrea, in 1920, proposed the estimation of the probable height of an individual by developing formulas for maximum and minimum heights from measurements of the lower central and lateral incisors and canines. The method was used in the case "Josef Mengele", to complement estimates. Tested in the Brazilian population, 70% of match between the actual and the estimated stature were obtained. Using more precise instruments, in the modified method, 96% of correct matching were verified. Recently, a new formula was introduced to estimate height, from measurements of upper teeth, because the technique cannot be used when jaw is not available. The correlation between height and dental dimensions is demonstrated. However, there is still a lack in scientific literature in this field, and further studies are necessary. The estimate of height from dental dimensions can be very useful and important, especially in situations where the complete skeleton it not found, and long bones are not available.

Música de duas dimensões: correspondências entre os universos instrumentais e eletroacústico

Coordenação de Aperfeiçoamento de Pessoal de Ensino Superior (CAPES)

Design e gênero: diretrizes metodológicas para validação do uso da linguagem visual na roupa infantil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação molecular da viabilidade do Mycobacterium leprae: uma comparação com outras abordagens metodológicas

Pós-graduação em Doenças Tropicais - FMB

Interações metodológicas e interrelações humanas: alicerçando a transdisciplinaridade no campo da saúde no trabalho

This article provides reflections and discussions about the importance of human interactions and methodological interrelations to substantiate the integrity in the transdisciplinary process in teams that operate in health area. Should be taken as reference the Complexity Theory of Edgar Morin, the logic transdisciplinary of Basarab Nicolescu and the formation groups principles based on the Socionomic Theory of Jacob Levy Moreno. It was concluded that the complexity of the methodologies in the field of workplace health, are influenced by factors that intersect between the scientific interaction and human interrelationships, which allow the transdisciplinary construction. However, the constructions requires the development of professionals in their areas and in their relationship with others as a way of supporting the perspective of transdisciplinarity, ie, interaction, in which different individuals are interrelated with the methodologies and providing articulations and coconstructions from which actualize the transformations.

Reflexões sobre a variação terminológica na lexicografia corrente no Brasil e a construção das bases teórico-metodológicas para o dicionário de lexicografia brasileira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

As dimensões geográficas dos Arranjos Produtivos Locais

This article aims to further discuss the Local Productive Arrangements (APLs), considering some geographical visions thinking about spatial configuration and the economic and social processes that characterize them, configuring a wide range of territorialities and productive territories that mark the landscape current Brazilian. In this sense, APLs are present today in both the figure of those who study analytical concept for regional development, and as a public policy supporting networks and supply chains in their territorial bases, especially small businesses. Thus, this arrangements can be read, geographically, as territorial productive specializations that are configured in spatial circuits of production, integrated with other regions, localities and supply chains through the morphology of networks and districts and grounded in networks of urban networks of material and immaterial flows which are bringing urban centers of different sizes. Considering the multidimensionality of the subject, the clusters have certain weaknesses in terms of their assumptions and perspectives, especially the limitations of the tool if designed just for resources and policies applied at the local level. Suggest the approach of a "geography of APLs" is to seek treat it from a territorial and socio reading.

Uma abordagem didático-pedagógica do cálculo diferencial e integral I na formação de professores de matemática

Pós-graduação em Educação Matemática - IGCE