Avaliação energética de um sistema de refrigeração por absorção utilizando gás de aterro e gás natural

The current technological development made by the absorption refrigeration system is an economic and ambient alternative in comparison to the vapor cycle, possessing an advantage that uses thermal energy that is less noble. Chillers of absorption are used widely in the air conditioned industries, because they can be set in motion through hot water vapors that burn natural gas, solar energy, biomasses amongst others instead of electricity. These systems allow it to reduce the tips of electric demand and balance the rocking of energy demand. This work has had a main objective to simulate a absorption refrigeration cycle with lithium-water bromide solution using biogas of sanitary landfill, and mixtures of this with natural gas. These results shown to the energy viability of the system burning biogas and its mixtures with natural gas in the generator, when compared with equipments that uses traditional fuels (natural gas, oil diesel, amongst others), for operation the commercial chillers with 15 kW of the refrigeration capacity and temperature of the water in the entrance of 14°C and the exit of 7°C.

Use of soybean oil fry waste for economical biosurfactant production by isolated Pseudomonas aeruginosa using response surface methodology

The present study sought biotensoactive production from soybean oil fry waste using Pseudomonas aeruginosa ATCC 10145 and Pseudomonas aeruginosa isolated from the soil of a petroleum station having undergone gasoline and diesel oil spills. The results of the experiments were analyzed using a complete factorial experimental design, investigating the concentration of soybean oil waste, ammonia sulfate and residual brewery yeast. Assays were performed in 250-mL Erlenmeyer beakers containing 50 mL of production medium, maintained on a rotary shaker at 200 rpm and a temperature of 30±1 °C for a 48-hour fermentation period. Biosurfactant production was monitored through the determination of rhamnose, surface tension and emulsification activity. The Pseudomonas aeruginosa ATCC 10145 strain and isolated Pseudomonas aeruginosa were able to reduce the surface tension of the initial mexlium from 61 mN/m to 32.5 mN/m and 30.0 mN/m as well as produce rhamnose at concentrations of 1.96 and 2.89 g/L with emulsification indices of 96% and 100%, respectively.

Germinação e vigor de sementes de crambe sob estresse hídrico

This study aimed to evaluate crambe seeds germination and vigor under water stress conditions induced by polyethylene glycol solutions. The seeds were germinated on substrate moistened with polyethylene glycol solutions, using the osmotic potentials of 0 (control), -0.2, -0.4, -0.6, -0.8, -1.0, -1.2 and -1.4 MPa. The seeds germination was evaluated by normal seedlings and root emission percentages. Vigor was evaluated by germination average time, relative frequency, velocity and synchronization index. It was observed that more negative osmotic potential caused significant reduction in crambe seed germination and vigor, and no normal seedlings was observed at potentials below -0.6 MPa.

Networked control system for the guidance of a four-wheel steering agricultural robotic platform

A current trend in the agricultural area is the development of mobile robots and autonomous vehicles for precision agriculture (PA). One of the major challenges in the design of these robots is the development of the electronic architecture for the control of the devices. In a joint project among research institutions and a private company in Brazil a multifunctional robotic platform for information acquisition in PA is being designed. This platform has as main characteristics four-wheel propulsion and independent steering, adjustable width, span of 1,80m in height, diesel engine, hydraulic system, and a CAN-based networked control system (NCS). This paper presents a NCS solution for the platform guidance by the four-wheel hydraulic steering distributed control. The control strategy, centered on the robot manipulators control theory, is based on the difference between the desired and actual position and considering the angular speed of the wheels. The results demonstrate that the NCS was simple and efficient, providing suitable steering performance for the platform guidance. Even though the simplicity of the NCS solution developed, it also overcame some verified control challenges in the robot guidance system design such as the hydraulic system delay, nonlinearities in the steering actuators, and inertia in the steering system due the friction of different terrains. Copyright © 2012 Eduardo Pacincia Godoy et al.

Diferenças regionais do cultivo de café no Brasil

Brazil is one of the major coffee producers in the world, because of this, the goal of this study was to assess the regional differences of coffee cultivation for the reference crops 2001/2002 and 2002/03 by means of a life cycle assessment (LCA) in order to generate detailed production inventory data as well as quantify the potential environmental impacts of this crop. All information considered in this study (use of water, fossil based energy, fertilizers, pesticides and correctives) was taken from data collected from the producing farms. Four Brazilian coffee producer regions located at the Southeastern region were evaluated: Sul de Minas Gerais and Cerrado Mineiro in Minas Gerais State, and Mogiana and Alta Paulista regions in São Paulo State. The data refer to a production of 25.2 million kg of green coffee. Depending on the considered region, the production of 1,000 kg of green coffee requires, on average, approx. 9,300 to 13,000 kg of total energy, 70 to 130 kg of diesel, 6,500 to 12,700 kg of process water, 270 to 340 kg of fertilizers (NPK), 2.0 to 13.0 kg of pesticides, 230 to 600 kg of correctives, and yield around 1,600 to 1,900 kg/ha. Despite 20% of the coffee growers showing a good environmental performance, i.e. consumption of pesticides, fertilizers and correctives lower than the regional averages, this study has also identified some farms that can probably reduce the amount of some inputs and enhance their environmental performance.

Development and validation of an environmentally friendly attenuated total reflectance in the mid-infrared region method for the determination of ethanol content in used engine lubrication oil

Lubricating oils are crucial in the operation of automotive engines because they both reduce friction between moving parts and protect against corrosion. However, the performance of lubricant oil may be affected by contaminants, such as gasoline, diesel, ethanol, water and ethylene glycol. Although there are many standard methods and studies related to the quantification of contaminants in lubricant oil, such as gasoline and diesel oil, to the best of our knowledge, no methods have been reported for the quantification of ethanol in used Otto cycle engine lubrication oils. Therefore, this work aimed at the development and validation of a routine method based on partial least-squares multivariate analysis combined with attenuated total reflectance in the mid-infrared region to quantify ethanol content in used lubrication oil. The method was validated based on its figures of merit (using the net analyte signal) as follows: limit of detection (0.049%), limit of quantification (0.16%), accuracy (root mean square error of prediction=0.089% w/w), repeatability (0.05% w/w), fit (R 2 =0.9997), mean selectivity (0.047), sensitivity (0.011), inverse analytical sensitivity (0.016% w/w-1) and signal-to-noise ratio (max: 812.4 and min: 200.9). The results show that the proposed method can be routinely implemented for the quality control of lubricant oils. © 2013 Elsevier B.V. All rights reserved.

Development of a thermoeconomic methodology for the optimization of biodiesel production - Part I: Biodiesel plant and thermoeconomic functional diagram

This work developed a methodology that uses the thermoeconomic functional diagram applied for allocating the cost of products produced by a biodiesel plant. The first part of this work discusses some definitions of exergy and thermoeconomy, with a detailed description of the biodiesel plant studied, identification of the system functions through Physical Diagram, calculation of the irreversibilities of the plant, construction of the Thermoeconomic Functional Diagram and determination of the expressions for the plant's exergetic functions. In order to calculate the exergetic increments and the physical exergy of certain flows in each step, the Chemical Engineering Simulation Software HYSYS 3.2 was used. The equipments that have the highest irreversibilities in the plant were identified after the exergy calculation. It was also found that the lowest irreversibility in the system refers to the process with a molar ratio of 6:1 and a reaction temperature of 60 °C in the transesterification process. In the second part of this work (Part II), it was calculated the thermoeconomic cost of producing biodiesel and related products, including the costs of carbon credits for the CO2 that is not released into the atmosphere, when a percentage of biodiesel is added to the petroleum diesel used by Brazil's internal diesel fleet (case study). © 2013 Elsevier Ltd. All rights reserved.

Morphology, sex ratio and gene expression of Day 14 in vivo and in vitro bovine embryos

The present study was designed to compare Day 14 bovine embryos that were produced entirely in vitro using the post-hatching development (PHD) system with in vivo-derived embryos without or with transient PHD culture from Day 7 to Day 14. Embryos on Day 14 were used for sex determination and gene expression analysis of PLAC8, KRT8, CD9, SLC2A1, SLC2A3, PGK1, HSF1, MNSOD, HSP70 and IFNT using real-time quantitative (q) polymerase chain reaction (PCR). First, Day 7 in vivo-and in vitro-produced embryos were subjected to the PHD system. A higher rate of survival was observed for in vitro embryos on Day 14. Comparing Day 14 embryos produced completely in vivo or completely in vitro revealed that the mean size of the former group was greater than that of the latter (10.29±1.83 vs 2.68±0.33mm, respectively). Expression of the HSP70 and SLC2A1 genes was down-and upregulated, respectively, in the in vitro embryos. The present study shows that in vitro embryos cultured in the PHD system are smaller than in vivo embryos and that of the 10 genes analysed, only two were differentially expressed between the two groups. These findings indicate that, owing to the poor survival rate, the PHD system is not reliable for evaluation of in vitro embryo quality. © 2013 CSIRO.

Ácaros associados à Jatropha spp. (Euphorbiaceae) no Brasil

Pós-graduação em Biologia Animal - IBILCE

Desempenho operacional e opacidade da fumaça do trator agrícola em função do tipo de biodiesel (soja x murumuru) em operação de preparo do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Biodiesel de mamona em trator agrícola na operação de preparo do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de biodiesel a partir de óleo residual reciclado e realização de testes comparativos com outros tipos de biodiesel e proporções de mistura em um moto-gerador

Pós-graduação em Engenharia Mecânica - FEIS

Qualidade de sementes de crambe submetidas a métodos de secagem e períodos de armazenamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise energética e econômica da produção de milho (Zea mays spp) em sistema de plantio direto em propriedades familiares no município de Pratânia-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de extração de madeira de eucalipto com forwarder em floresta de primeira e segunda rotação

Pós-graduação em Agronomia (Energia na Agricultura) - FCA