250 resultados para Class II occlusion


Relevância:

90.00% 90.00%

Publicador:

Resumo:

Due to its high prevalence in general population, Angle Class II malocclusion has been widely studied by several authors, as well as the methods for its treatment. Among the possible treatment methods stands out the Herbst appliance. Reintroduced more than three decades ago in the orthodontics community, it became the most utilized appliance because it does not require patient compliance, and provides continued action through bilateral telescopic tubes. The objective of the present article was to demonstrate the early treatment of Class II Division 1 malocclusion with mandibular retrusion using Herbst appliance.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The current reports the case of a young patient with malocclusion Class II division 1 on permanent dentition treated in two stages, rthopedics and orthodontics, respectively. At first, the banded Herbst appliance was used duringa 7 months period, followed by a T4K appliance, Trainer for Kids used as retention, and on the second stage the corrective Orthodontics was performed. The results showed the acquirement of a Class I dental relationship, which was kept stable, with excellent intercuspation, even after 5 years of the removal of the Herbst appliance, as well as the correction of the overjet and the reduction of the facial profile convexity. It can be concluded that the Herbst appliance was very efficient in correcting the Class II malocclusion, long term, also providing a very favorable effect on the facial profile.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The aim of this retrospective study was to evaluate mandibular and maxillary changes induced by the use of Herbst applianceand by natural growth through oblique cephalometric radiographs in children with Class II division 1 malocclusion with mandibular retrusion. A sample of 49 individuals with age ranging from 8 to 10 years old (before growth peak) with Class II division 1, were into two groups: Herbst treated group (n=24) and control group (n=25). Both groups were paired for gender and chronological age. Statistical analysis was performed through Student’s t test. The Herbst appliance promoted the Class II correction in a 7 months period by mesialization of lower permanent first molars and distalization of upper permanent first molars. The Herbst appliance had no influence over the mandibular structure or the mandibular length. It was concluded that early treatment with Herbst appliance corrected the Class II malocclusion by means of dentoalveolar changes.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

This work had aim to present two clinical cases with open bite Class II malocclusion that treated in the phase of the mixed dentition with the modified Thurow appliance and in the permanent dentition with fixed appliance. The dentoskeletal effects of these appliances were carefully analyzed with the aid of metallic implants inserted in both maxilla and mandible. The correction of the malocclusion and the improvement of the skeletal, dental and facial relationship were observed in both cases. The modified Thurow appliance followed by fixed-appliance as a two-phase treatment protocol revealed to be an effective treatment approach for the two young people that initially presented a Class II division 1 malocclusion associated to anterior open bite presented.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Objective: evaluate the immediate dental and skeletal changes induced by the Herbst appliance on early treatment of Angle´s Class II malocclusion. Material and Method: several electronic databases such as Scopus, Pub Med, Medline, Cochrane Library, Lilacs and Scielo were searched. The abstracts that fullfilled the selection criteria were selected and those that did not provide enough information about these criteria were selected but the final decision of including them or not on the research, was taken after the complete reading of the article. The selection criteria were: clinical studies with Class II individuals, both male and female, with initial age of 7 to 10 years, treated with the Herbst appliance that analysed the dental and/or skeletal changes evaluated on lateral cephalometric radiographs; researches where the treatment performed did not involve extractions or surgical interventions; studies that included patients without syndromes or health concerns and articles published in English or Portuguese. Results and Conclusions: five articles were selected. The articles showed that significant changes happened in the mandibular sagittal lenght, on facial convexity angle, on maxillo-mandibular relationship, on retroclination of the upper incisors and on distal movement of the upper molars, on proclination of the lower incisors and on extrusion of the lower molars. The appliance exerted a limited effect on the anterior relocation of the maxillary complex and on facial heights. However, more studies about the performance of the Herbst appliance on early treatment of Class II are needed.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The Herbst appliance is currently one of the most used appliances for the correction of Class II division 1 with mandibular retrusion. When used in peak, or just after the peak of growth it can result in some skeletal gain, which is favorable to the correction of anteroposterior discrepancy with effective and stable results. This article aims to report a case of a patient with malocclusion Class II division 1 with mandibular retrusion, associated with maxillary protusion, treated in two stages: with Herbst splint metallic appliance followed by fixed appliance orthodontic treatment.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Extraoral appliances represent an alternative for correction of Class II malocclusions. The application of external force leads to tooth movement and influence the growth of the maxillomandibular complex. This article aims to present the removable headgear as an adjuvant in the treatment of Class II division 1 in the mixed dentition.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Destruction of bone and periodontal ligament as a result of periodontal disease can lead to anatomical defects in the furcation area. Treatment of these lesions is a major challenge to the clinician. Periodontal instruments have limited access to this area and plaque and calculus removal from root surfaces are extremely difficult. For proper treatment planning a number of factors must be taken into consideration to achieve immediate and long term success. Surgical therapy associated with bone grafts may be a viable option in the treatment of class II furcation defects, aiming to restore lost tissues. The aim of this paper is to report a clinical case where a simplified surgical approach with the use of autogenous graft was used to treat a class II furcation defect Twelve months after the surgery, an increase in clinical attachment level and pocket depth reduction resulted in a complete closure of the furcation lesion.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

ln order to predict the facial growth using Jarahak's analysis, cephalometric radiographies of 120 subjects during the mixed dentition and between 6 and 10 years of age were studied. From the total, 60 subjects (30 males and 30 females) were classified as Angle's Class I and 60 subjects (30 males and 30 females) were classified as Angle's Class II, Division 1. AIl subjects did not receive any orthodontic treatment. The proportion between anterior and posterior facial heigth (SGo-NMe) was studied, which is determined by the formula PFH x 100/ AFH = %, neither being straight (> 62% < 65), clockwise ( > 58% < 62%) and anti-clockwise ( > 65% - 80%). Mean average, standard deviation and facial height proportion (SGo - NMe) were determined for males and females according to Angle's classification of malocc!usion. Sexual dimorphism was examined with regard to different types of Angle's malocclusion and the direction of the facial growth, and the correlation of four cephalometrics measurements were analvsed

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Because it still brings polemic among the professionals, it was mention once more, in this literature review, the theme that aims to define the appropriate timing to approach the bad occlusions of Class II, and also when it would the right opportunity to treat them, in way that would convey to the patient consistent, stable results in a long term. These are important aspects to be taken into consideration by orthodontists, either by those who defend the early treatment or by those who defend the late treatment. Therefore, the present study aims to aid the clarification of daily doubts regarding this aspect.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The aim of this study was to evaluate the occlusal condition of 12 year-old children examined by the Oral Health Brazil 2003 Project in Cáceres city. The sample consisted of 170 children, boys and girls, selected at random among 20 schools that took part in this project. It was used for the analysis of the occlusal condition the Dental Aesthetic Index (DAI), as manual of basic epidemic rising in Oral Health extolled by the World Health Organization which describes the occlusal conditions in relation to dentition, space and occlusion of the permanent dentition. It was observed that the prevalence of the normal occlusion and of the malocclusion were, respectively, 21.18% and 78.82%. This last one was present due to the tooth crowding (74.93%), spacing in the incisor segment (23.88%), diastema (17.17%), anterior maxillary misalignment (58.95%) and anterior mandibular (61.19%), excessive overjet (11.94%), negative overjet (4.47%), open bite (1.5%) and molar relationship Class II or III (26.87%). It was concluded that the studied sample presents a high index of factors to compose the malocclusion.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Schistosomiasis is still an endemic disease in many regions, with 250 million people infected with Schistosoma and about 500,000 deaths per year. Praziquantel (PZQ) is the drug of choice for schistosomiasis treatment, however it is classified as Class II in the Biopharmaceutics Classification System, as its low solubility hinders its performance in biological systems. The use of cyclodextrins is a useful tool to increase the solubility and bioavailability of drugs. The aim of this work was to prepare an inclusion compound of PZQ and methyl-beta-cyclodextrin (MeCD), perform its physico-chemical characterization, and explore its in vitro cytotoxicity. SEM showed a change of the morphological characteristics of PZQ:MeCD crystals, and IR data supported this finding, with changes after interaction with MeCD including effects on the C-H of the aromatic ring, observed at 758 cm(-1). Differential scanning calorimetry measurements revealed that complexation occurred in a 1:1 molar ratio, as evidenced by the lack of a PZQ transition temperature after inclusion into the MeCD cavity. In solution, the PZQ UV spectrum profile in the presence of MeCD was comparable to the PZQ spectrum in a hydrophobic solvent. Phase solubility diagrams showed that there was a 5.5-fold increase in PZQ solubility, and were indicative of a type A(L) isotherm, that was used to determine an association constant (K(a)) of 140.8 M(-1). No cytotoxicity of the PZQ:MeCD inclusion compound was observed in tests using 3T3 cells. The results suggest that the association of PZQ with MeCD could be a good alternative for the treatment of schistosomiasis.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aim of the study was to evaluate the production of four tomato cultivars of determinate growth, in the field, with and without ground cover. The cultivars examined were: 'AP-533', 'AP-529', 'Hypeel 5131 and 'PS-41816', which were cultivated with a spacing of 1 m between rows and 0.4 m between plants. The experimental design utilized was that of subdivided parcels, where parcels were provided with and without a ground cover of black polyethylene, and subparcels consisted of the cultivars; eight repetitions were used. The eight central plants in the parcel were evaluated according to the following characteristics: fresh weight of fruit per plant and number of fruit per plant, separated by size. For the classification of fruit, the same plants were divided into classes based on the diameter of the fruit. The diameter size was as follows: class 1, 3 cm; class II, 4 cm; class III, 4.5 cm; and class IV, 5.5 cm. The results showed that there were no significant differences in production among the cultivars studied. Cultivars 'AP-533' and 'Hypeel 513' demonstrated greater production per plant, when ground cover was used, yielding 1474 and 1404 g/plant, respectively. When black polyethylene ground cover was not used, these cultivars produced 1258 and 1271 g of fruit per plant, respectively. The cultivars 'AP-529' and 'PS41818' showed a greater yield of fruit when cultivated without ground cover, with 1548 and 1663 g/plant, respectively. The cultivar 'Hypeel 513' had the highest percentage of fruit with the largest dimensions. An interaction was appeared between 'AP-529' and ground cover, where the production of this cultivar was lower with black polyethylene ground cover compared to bare ground. It is concluded that there are no significant differences in the cultivation of the tomato hybrids 'AP-533', 'Hypeel 513' and 'PS-41816' with and without ground cover, but that the cultivar 'AP-529' should be planted preferentially in soil without black polyethylene cover.