Aparelho evaporador de extrato orgânico de amostras sobre fluxo de gás, em especial, para análise cromatográfica

Constituído por uma bacia (1) para banho-maria circular, preferencialmente em aço inox sem soldas, provida de resistência tubular (2) blindada (1000W) permitindo temperaturas de 30 a 100<198>C, ligada a um termostato.

Uso de aparelho de amplificação sonora individual por idosos: estudo SABE - saúde, bem- estar e envelhecimento

PURPOSE: Describe hearing aid use by the elderly population in the city of São Paulo and identify associated factors. METHODS: A cross-sectional, descriptive, quantitative study integrated with the SABE (health, well-being and aging) project developed in 2006. A total of 1.115 individuals aged 65 or over were interviewed. Sample selection occurred in two stages, with replacement and probabilities proportional to the population to complement those aged 75 or over. Structured questionnaires and validated instruments were used. The data were weighted, the Rao-Scott test was used for univariate analysis and backward stepwise logistic regression was used for multivariate analysis, performed on Stata 10® software. RESULTS: Three hundred and seventy-seven subjects (30.4%) were classified as hearing impaired and 10.1% of these reported using hearing aids. To acquire the devices, 78.8% used their own resources and 16.9% acquired them through the Brazilian public health system (SUS). Among non-users of hearing aids, 16.6% reported prior indication; however, 8.6% were unable to adapt to the device and 8.0% could not afford to acquire one. Hearing aid use was associated with lower prevalence of probable dementia. CONCLUSION: The low number of hearing aid users indicates the difficulties elderly people face in acquiring them and/or that the health services face in effectively helping them to adapt. These findings may influence the quality of life of elderly with hearing impairment, given the association with probable dementia revealed by this study.

Hábito alimentar e morfologia do aparelho digestivo de espécies de Carabidae (Insecta: Coleoptera) associados a plantas herbáceas e ao algodoeiro colorido

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Utilização da mínima quantidade de lubrificante (MQL) com água no processo de retificação cilíndrica em cerâmica avançada com rebolo de ligante resino cerâmico/metálico

Pós-graduação em Engenharia Mecânica - FEB

Desenvolvimento de sensores descartáveis de ouro nanoestruturado modificados com complexo metálico visando detecção in situ de corantes semipermanentes de cabelo

Pós-graduação em Química - IQ

Estudo e seleção de um aparelho de ar condicionado para ônibus

The study and selection of an equipment of air conditioner for any type of environment, should be made without overestimate or undersizing the project. The undersizing does not provide an adequate comfort temperature if the environment is too hot because the air conditioner does not remove all the heat necessary in the environment. But if the project is oversized, energy consumption is higher and there is an unnecessary cost. To prevent these failures is necessary to make a calculation of the thermal load on the environment and choose the equipment that has a higher cooling capacity than the calculated heat load and closer to the calculated heat load. In this graduate work will be chosen an air-conditioned equipment for bus, showing the calculations made for the thermal load for various types of heat gain in this type of vehicle. The thermal load on vehicles is more complicated to calculate than in areas because there are several factors that vary with the movement of the vehicle. It will also explain the compression refrigeration cycle, which is the cooling system used in vehicles because it is weightless, compact and lower cost. From the calculated heat load, it will be chosen an air conditioner that best suits the project and, finally, a brief presentation of the selected equipment will be made

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Tratamiento de maloclusión classe II división 1 con el aparato de Herbst tipo férula, después del pico de crecimiento puberal

Malocclusion class II-1, is represented by a high prevalence in Brazil, being something common in orthodontic practice. One of the main characteristics of this malocclusion is jaw retrusion, by what many devices of jaw advance are presented in the literature. Being one of them Herbst's device, which is a functional and fixed device created by Emil Herbst (1905) and updated by Hans Pancherz in the decade of 80s.This device is characterized by keeping the jaw advance in a continuous way, while presenting a less active treatment, leading to an immediate aesthetic impact, and the patient cooperation is not required. To improve the anchoring and prevent the collapse of the apparatus was set up last amended version of it by Dr Raveli quoted as Herbst splint. Recent research indicates the use of this device after the peak pubertal growth, creating an appropriate response condylar. The aim of this work is to show the orthodontist a choice of how to use the splint Herbst in Class malocclusions II-1.

Tratamento da classe II hiperdivergente com o aparelho extra bucal de Thurow modificado

Objectives: natural dentofacial changes and that induced by the Thurow modified extra oral appliance (TMEOA) were evaluated in this prospective study. Methodology: the data consisted of fifteen Class II division 1 children 7 to 10 years old, with anterior open bite and hiperdivergent facial pattern treated with the Thurow appliance and of fifteen Class II division 1 children followed longitudinally from 6 to 12 years of age without treatment (Burlington Growth Centre, Toronto University, Canada). The analyses were based in traditional measurements obtained in lateral cephalometric radiographs scanned with the aid of the software Radiocef Studio®. Radiographs were taken in the beginning and after 1 year of treatment for the treated group and at the 6, 9 and 12 years of age for the control group. Results: the data analysis showed that the TMEOA significantly reduced the SNA, ANB, AOBO, SNPOc SNPM, SGO/NMe, OJ e OB. On the other hand the appliance did not interfere with the SNB e SNPP. The natural growth promoted significant change in the ANB, AOBO, SNPOc, OJ e OB from 6 to 9 years and in the SNB, SNPOc e SGo/NMe from 9 to 12 years. The restriction of the maxillary growth (SNA), reduction of the skeletal discrepancy (ANB) and the reduction of the overjet (OJ) were significant with the treatment considering the natural growth as verified in the control group. Conclusion: the TMEOA corrected the skeletal Class II malocclusion by maxillary restriction, reducing the overjet, closing the anterior open bite and decreasing both the hyper divergent facial pattern and mandible plane inclination.

Aparelho extrabucal como recurso auxiliar para alinhamento e nivelamento no tratamento orto cirúrgico de má oclusão classe III esquelética

When well indicated, the orthodontic surgical approach is the ideal treatment mean for Skeletal Class III adult patients. To improve facial esthetic results from orthognatic surgery, the leveling and alignment of maxillary dental arch must be achieved with minimal inclination and projection or even retro-inclination of anterior upper teeth. During a pre-surgical phase of 12 months, headgear bilateral force of 150 g/F was applied to the upper molars of a 22 years old male compliant patient with Class III skeletal malocclusion, to provide an upper teeth control of mesial tipping and projection during alignment and leveling. The ideal occlusal parameters required for surgical procedure were achieved without dental extractions permitting a total treatment period of 37 months. The outcomes remained stable over 3 years follow up after the removal of the appliance. The results indicate that, although headgear use depends greatly on patient compliance, when well indicated it is an interesting alternativetopromote dentaldecompensationon pre-surgical period, in order to allow surgical correction of skeletal Class III malocclusion.

Avaliação do índice de Litle em indivíduos que utilizaram o aparelho funcional T4K

The study aimed to assess the degree of dental crowding correction on the lower anterior region of patients treated with T4k functional appliance using Little’s irregularity index. Twenty caucasian patients of both gender (10 female and 10 male) were selected. They featured malocclusion Class I and II in mixed dentition, with chronological age between 5.7 and 11 years. The treatment lasted from 1 year and 11 months up to 3 years and 11 months. Lower anterior crowding was measured using Little’s irregularity index. Measurements were obtained on study models achieved before and after functional orthopedic therapy, using a digital caliper in millimeters and placed parallel to the occlusal plane. Overjet and overbite measurements were also performed using a caliper. Results demonstrated that the therapy provided significant decrease in overjet (average = 1.55 mm) and also in the irregularity index (average = 1.23 mm). There was a nonsignificant raise in overbite. There was no relation between the studied variables and the treatment period or even with the patient’s age in the beginning of the therapy. The treatment with T4k resulted on reduction and improvement of dental crowding.

Alterações dimensionais em pacientes submetidos à expansão rápida da maxila com aparelho do tipo Haas

The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.

Aparelho de Thurow modificado e aparelho ortodôntico fixo no tratamento da classe II com mordida aberta anterior

This work had aim to present two clinical cases with open bite Class II malocclusion that treated in the phase of the mixed dentition with the modified Thurow appliance and in the permanent dentition with fixed appliance. The dentoskeletal effects of these appliances were carefully analyzed with the aid of metallic implants inserted in both maxilla and mandible. The correction of the malocclusion and the improvement of the skeletal, dental and facial relationship were observed in both cases. The modified Thurow appliance followed by fixed-appliance as a two-phase treatment protocol revealed to be an effective treatment approach for the two young people that initially presented a Class II division 1 malocclusion associated to anterior open bite presented.

Modificação de forma e dimensões dos arcos superior e inferior obtidas em modelos de estudo após expansão rápida da maxila com o aparelho hyrax

The aim of an orthodontic treatment is the achievement of a balanced, esthetic and, most of all, stable, intra and inter arches relationship. A common problem observed in occlusion is posterior crossbite and atresic maxilla. This problem may be treated by slow expansion, rapid expansion or surgically assisted expansion. For the present study cast models of 14 children between 7 and 11 years old were evaluated. There were 7 male and 7 female subjects that presented posterior crossbite and needed rapid maxillary expansion. The Hyrax appliance performed the therapy for correction of this transversal alteration, which is a common possibility in the treatment of this malocclusion. It was observed that the distance between the upper first molars and upper cuspids increased significantly; the length of the upper arch decreased and its perimeter increased significantly. At the lower arch there were no dimensional changes.

Trainer for Kids (T4K), um único aparelho para o tratamento de dois problemas verticais: mordida aberta anterior e mordida profunda

The Trainer for Kids is a prefabricated funcitonal appliance indicated for early treatment of the Class I malocclusion, crowding, anterior open bite, deep bite and oral habits (finger and/or sucking, atypic deglutition, tongue interposition and oral breathing). The aim of this paper is show two case reports treated with the T4K appliance being an anterior open bite and a deep bite.