Análise das possibilidades de integração entre programas ambientais de usinas hidrelétricas e sistemas de gestão ambiental

A avaliação de impacto ambiental tem sido muitas vezes, vista apenas como um procedimento burocrático para a obtenção da licença ambiental, desconsiderando os estudos realizados, após a aquisição da licença e contratando outros serviços para orientar a adoção de um sistema de gestão objetivando boas práticas ambientais. Porém sabe-se que a estrutura geral das metodologias de avaliação de impacto ambiental apresenta muitos pontos semelhantes se comparada à identificação dos aspectos e impactos ambientais de um sistema de gestão ambiental, o que indica uma interface entre os dois instrumentos apesar da execução integrada ainda não ser um procedimento comum na gestão ambiental de empreendimentos. Nesse sentido, o presente trabalho objetivou analisar as possibilidades do emprego de um sistema de gestão ambiental preconizado pela ISQ 14001 para o gerenciamento de programas ambientais decorrentes de processos de avaliação de impacto ambiental e de licenciamento ambiental de usinas hidrelétricas, através do foco específico naqueles progrmas relacionados diretamente com o monitoramento e o controle da qualidade e da qualidade da água do reservatório, que é um fator essencial para a função de produção de um empreendimento hidrelétrico. Para esta análise, utilizou-se o caso da usina hidrelétrica de Santo Antônio, identificando 9 programas ambientais decorrentes de processos de avaliação de impacto ambiental com grandes possibilidades de serem utilizados na estruturação de sistemas de gestão ambiental de usinas hidrelétricas e cuja adequada execução, corrobora com a integração entre os respectivos instrumentos além de corresponder à necessidade de compatibilização dos instrumentos de política ambiental na busca de um desenvolvimento com adequada proteção ambiental e de uma atuação mais consciente das organizações

Sensoriamento remoto e Sistemas de Informações Geográficas (SIG) na análise dos impactos referentes à cultura canavieira e reflorestamento: a subtração dos biomas nativos no município de Itirapina-SP

The main objective of this study was to perform a temporal analysis of land use and cover of Itirapina – São Paulo estate, Brazil, for 1962, 2000 and 2008 scenarios, indicating the rate of change in native vegetation and contextualizing its modifications. Based on photointerpretation performed by supervised classification using the method of Bhattacharya, the thematic classes were mapped and characterized in an area equivalent to 56400 hectares. Using remote sensing technologies and geographic information systems, was structured and implemented a georeferenced and relational database, allowing the analysis of the size of the area occupied. The results showed that the expansion of cultivation of cane sugar and reforestation in the past 45 years has been conditioned the fragmentation of natural vegetation cover in the city, which fell by 34793 ha (61,7%) in 1962 to 9765,2 ha (17,3%) in 2008, with the loss of 25027,8 hectares.

Análise comparativa entre sistemas de resfriamento de injeção de plástico

This study aims to prove the economic feasibility of the installation of mechanical compression chillers on plastic injection molding machines in order to reduce the production cycle time of toothbrush cables in a specific case study. This evidence was confirmed by the comparative analysis of the system replaced and the new system installed. The old system had only one closed loop cooling tower which pumped chilled water to the injection molds, and the new system has the same tower sending cold water to the condensers of individual chillers installed on each injection machine. We conducted an analysis of energy efficiency in each system, showing that in terms of thermal efficiency virtually nothing has changed, but in terms of electricity demand the new system consumes 60.3 kW more. We conducted an analysis of machine productivity for both systems, showing a much higher productivity of the new system due to reduced cycle times caused by the presence of chillers and their greater cooling capacities. Equipped with data such as electricity rates, increases in operating costs and initial investments, the increase in consumption and demand of electricity plus the cycle time reduction were also calculated over so the simple payback 1 year and 2 months was reached

Análise da troca de calor em sistemas de injeção de termoplásticos – um estudo de caso: polipropileno

The purpose of this work was to define the processes through which the cooling of thermoplastics parts occur inside the mold cavity in an injection process. The plastic materials have become more widespread in the automobile industry and, among its manufacturing processes, injection moulding develops quickly, allowing the manufacturing of quality parts in great volumes. Data was collected from the injection of Volkswagen Gol NF 23X (Gol Generation 5). Using approximated methods for calculation for the heat Exchange inside the mould, in the cooling system, the required water flow was determined to properly cool the parts. Comparing the obtained value with Project specifications, it was verified that the method, in spite of incurring in some mistakes, is efficient in determining the flow of cooling fluid and serves as a verification tool for the parameters defined on project, and can be applied to simple projects. The definition of the cooling system, in practice, is dependent on innumerable variables and each case must be approached in itself, since the parameters for one product may not be ideal for another

Análise de algoritmos computacionais utilizados em sistemas de planejamento de braquiterapia de alta taxa de dose: estudo comparativo com o Código MCNP-5C

In radiotherapy, computational systems are used for radiation dose determination in the treatment’s volume and radiometric parameters quality analysis of equipment and field irradiated. Due to the increasing technological advancement, several research has been performed in brachytherapy for different computational algorithms development which may be incorporated to treatment planning systems, providing greater accuracy and confidence in the dose calculation. Informatics and information technology fields undergo constant updating and refinement, allowing the use Monte Carlo Method to simulate brachytherapy source dose distribution. The methodology formalization employed to dosimetric analysis is based mainly in the American Association of Physicists in Medicine (AAPM) studies, by Task Group nº 43 (TG-43) and protocols aimed at dosimetry of these radiation sources types. This work aims to analyze the feasibility of using the MCNP-5C (Monte Carlo N-Particle) code to obtain radiometric parameters of brachytherapy sources and so to study the radiation dose variation in the treatment planning. Simulations were performed for the radiation dose variation in the source plan and determined the dosimetric parameters required by TG-43 formalism for the characterization of the two high dose rate iridium-192 sources. The calculated values were compared with the presents in the literature, which were obtained with different Monte Carlo simulations codes. The results showed excellent consistency with the compared codes, enhancing MCNP-5C code the capacity and viability in the sources dosimetry employed in HDR brachytherapy. The method employed may suggest a possible incorporation of this code in the treatment planning systems provided by manufactures together with the equipment, since besides reducing acquisition cost, it can also make the used computational routines more comprehensive, facilitating the brachytherapy ...

Análise comparativa dos sistemas de jogo e das ações técnicas realizadas pela seleção brasileira de futebol

Since its origin, soccer has been conquering followers all over the world. As a consequence of this cultural phenomenon, countless works are being done aiming to analyze the game systems and the fundamentals carried out by a team. The purpose of this paper is to analyze the Brazilian Soccer Team’s game systems and actions with ball possession in the 1958, 1962 and 2002 World Cup finals. Specifically, the paper analyzed the actions that occur during the match, such as control, dribble, pass, shot, foul and tackling. In order to achieve that, the Skout software (Barros et al., 2006) was utilized and, through it, all fundamentals carried out by the Brazilian team were identified and codified in a virtual field. The data from each match was transported into the Matlab® software, in which the zone of major action of each player was analyzed, represented by the main axis. The outcome showed that the game systems put into practice by the Brazilian team in the 1958 and 1962 World Cup finals didn’t present significant changes, nevertheless, regarding the 2002 final, there was a great difference. The Brazilian team got similar percentages in the technical actions carried out in the three World Cup finals analyzed, however, in absolute numbers, the passes, the shots and the dribbles decreased while the fouls increased.

Análise da ABNT NBR ISO 14005:2012 como instrumento de implementação de sistemas de gestão ambiental em pequenas e médias empresas

The use of environmental management systems - EMS has shown to be a key tool for addressing the environmental aspects and impacts of an organization. The vast majority of EMS based on the requirements of ISO 14001:2004, as it is a globally recognized standard and adopt its recommendations is considered to be a guarantee of fulfilling the basic requirements of an EMS. Despite all the benefits that the system provides, we still find many problems in the implementation of EMS, especially in small and medium enterprises or SME. Most of the difficulties of implementation is related to intrinsic factors that companies of this size have, and issues related to the models and methods used to implement an EMS. Thus, this work aimed to assess whether the guidelines of ISO 14005:2012 meet the needs of SMEs for the effective implementation of an environmental management system. For it has been identified in the relation between SMEs and EMS the majof intrinsic problems of SMEs to implement (PII), such as lack of financial and human resources, and lack of commitment from top management to the SGA. Also was also pointed the main implementation issues related to ISO 14001 (ABNT, 2004) or the models or methods (PIM), highlighting the lack of environmental performance criteria, and the need for a path or sequence of steps for implementation. The study of ISO 14005 (ABNT, 2012) showed that the standard guidelines and implementation examples proposed, include solutions for all problems related to EMS implementation SMEs

Análise da viabilidade econômica na implantação de inversores frequência em sistemas de bombeamento

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ

Análise do impacto de sistemas fotovoltaicos conectados à rede de distribuição na qualidade da energia de uma smart city: Análise do impacto de sistemas fotovoltaicos conectados à rede de distribuição na qualidade da energia de uma smart city

Pós-graduação em Engenharia Elétrica - FEIS

Avaliação in vitro da resistência de união de dois sistemas adesivos dentinários à dentina bovina antes e após a termociclagem: teste de cisalhamento e análise estereomicroscópia

Pós-graduação em Odontologia Restauradora - ICT

Análise de materiais para sistemas de fechamento ósseo através da caracterização superficial e comportamento mecânico

Pós-graduação em Engenharia Mecânica - FEB

Análise do pré-mix de breu esterificado e policloreto de alumínio como agente de colagem interna em sistemas alcalinos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise energética de sistemas de produção de etanol de mandioca, cana-de-açúcar e milho

The objective of this work was the analysis of the energetic ethanol production systems using as source of carbohydrates, manioc, sugar cane and maize crops. The searches were carried from the field in the Paranapanema River Valley, state of Sao Paulo in the operations of cultivation and industrial processing of raw materials for analysis. The expenditure of energy concerning the agricultural part was made by the energy consumption of stage production of one hectare of sugar cane, cassava and corn, tillage and planting procedure, inputs, driving the crop, harvest, transport industry and energy draining. The expenditure of energy referring to the part was made by the industry energy consumption of stage processing of one tonne of sugar cane, cassava and corn, in the operations of disintegration / milling, hydrolysis / treatment of the broth, fermentation, distillation and maintenance of equipment. Under the system of agronomic production of raw materials, manioc presented an energy expenditure below that of sugar cane and maize (9,528.33 MJ ha-1; 14,370.90 MJ ha-1 and 15,633.83 MJ ha-1, respectively). For the ethanol produced, the operations of cultivation has consumed 1.54 MJ l-1 with manioc; MJ 1.99 l-1 with sugar cane, and 7.9 MJ l-1 with the corn. In the industrial processing of a ton of raw material, sugar cane presented an energy cost less than the cassava and maize (1,641.56 MJ t-1; 2,208.28 MJ t-1 and MJ 3,882.39 t-1, Respectively), however, showed a higher cost than when they related to ethanol produced (19.38 MJ l-1; 11.76 MJ l-1 and 11.76 MJ l-1, respectively). In the final energy balance for each megajoules of energy invested in sugar cane were required 1.09 MJ (9%), for each megajoules of energy invested in manioc were required 1.76 MJ (76%) and for each megajoules energy invested in maize were required 1.19 MJ (19%). Overall, it appears that the manioc consumes less energy than sugar cane and corn crops in the process of agribusiness obtaining ethanol.