Global analysis of aerodynamics deflectors efficiency in the grinding process

The conventional, grinding methods in some cases are not very efficient because the arising of thermal damages in the pieces is very common. Optimization methods of cutting fluid application in the grinding zone are essential to prevent thermal problems from interaction of the wheel grains with the workpiece. surface. The optimization can happen through the correct selection of the cut parameters and development of devices that eliminate air layer effects generated around the grinding wheel. This article will collaborate with the development of an experimentation methodology which allows evaluating, comparatively, the performance of the deflectors in the cutting region to minimize the air layer effect of the high speed of the grinding wheel. The air layers make the cutting fluid jet to dissipate in the machine. An optimized nozzle was used in order to compare the results with the conventional method (without baffles or deflectors) of cutting fluid application. The results showed the high eficciency of the deflectors or baffles in the finish results. Copyright © 2006 by ABCM.

Measuring the efficiency of outsourcing: An illustrative case study from the aerospace industry

Outsourcing is related to the action which an organization deals with its suppliers through a kind of business contract where a specific activity or service has been hired to be made. The outsourcing of some activities has become a common practice in the industry, nowadays. It reduces costs, significantly, in the production process and, at the same time, adds some values to the business organization. However it is necessary to measure the performance of these activities. Data Envelopment Analysis (DEA) is a non-parametric method useful to measure comparative performance. It has a wide range of applications measuring comparative efficiency. The Analytic Hierarchy Process (AHP) is a multiple criteria decision-making method that uses hierarchic structures to represent a decision problem and then develops priorities for the alternatives based on the decision-maker's judgments. This paper presents an integrated application based on DEA and AHP to evaluate the efficiency of subcontracted companies in a Brazilian aerospace factory. © 2007 Springer-Verlag London Limited.

Orientation, building height and sky view factor as energy efficiency design parameters

The energy efficiency of buildings should be a goal at the pre-design phase, though the importance of the design variables is often neglected even during the design process. Highlighting the relevance of these design variables, this research studies the relationships of building location variables with the electrical energy consumption of residential units. The following building design parameters are considered: orientation, story height and sky view factor (SVF). The consideration of the SVF as a location variable contributes to the originality of this research. Data of electrical energy consumption and users' profiles were collected and several variables were considered for the development of an Artificial Neural Network model. This model allows the determination of the relative importance of each variable. The results show that the apartments' orientation is the most important design variable for the energy consumption, although the story height and the sky view factor play a fundamental role in that consumption too. We pointed out that building heights above twenty-four meters do not optimize the energy efficiency of the apartments and also that an increasing SVF can influence the energy consumption of an apartment according to their orientation.

In vitro antimicrobial efficiency of a mouthwash containing triclosan/gantrez and sodium bicarbonate

Several antiseptic substances have been used as adjuncts to routine mechanical procedures of oral hygiene, based on their antimicrobial effects. The objective of this study was to assess in vitro the antimicrobial efficiency of 2 mouthwash containing Triclosan/Gantrez and sodium bicarbonate in comparison to both positive and negative controls. Standard strain samples of Escherichia coli, Pseudomonas aeruginosa, Actinomyces viscosus and Bacillus subtilis were used. Samples of Streptococcus mutans and Gram-negative bacilli were collected from 20 volunteers (10 with a clinically healthy periodontium and 10 presenting biofilm-associated gingivitis). Evaluation of the antimicrobial activity was performed by determining the minimal inhibitory concentration (MIC). The results indicated that the test solution inhibited the growth of both Gram-negative and Gram-positive microorganisms from the volunteers' saliva as well as that of the standard strains at the MIC dilution of 1:20, whereas the MIC dilution of 0.12% chlorhexidine against the same bacteria was 1:80. Thus, even though the tested mouthrinse solution presented an in-vitro antimicrobial activity superior to that of a placebo, it was inferior to that of chlorhexidine.

Complete denture masticatory efficiency: a literature review

The restoration of masticatory function and esthetics is an important aim in dentistry mainly when patients present with extensive tooth loss. The aim of mastication is to reduce food size to produce a homogeneous bolus appropriate to be swallowed. For edentulous patients, chewing efficiency is reduced because dental arches are replaced by artificial teeth. The aim of this study is to present factors related to chewing efficiency for the edentulous patient.

Development of a model to measure the efficiency of outsourced companies in the process of aircraft spare parts technical publications

This paper presents a proposal of a model to measure the efficiency of outsourced companies in the aeronautical industry applying the methods DEA and AHP. It also proposes an evaluation in the relation between the variables of the process and the value obtained for the effiiency. The criteria of Quality, Time and Cost were considered the outputs of the process, and those criteria were quantified by AHP for DEA matrix.The number of technical documents received by those outsorced companies were considered the input of the process. The other purpose is to separate the companies in groups considered able to receive an investment to improve their process. Copyright © 2008 SAE International.

On the efficiency of an alternative codification for multiobjective service restoration in electric distribution networks

This paper proposes an alternative codification to solve the service restoration in electric power distribution networks using a SPEA2 multiobjective evolutionary algorithm, assuming the minimization of both the load not supplied and the number of switching operations involved in the restoration plan. Constrains as the line, power source and voltage drop limits in order to avoid the activation of protective devices are all included in the proposed algorithm. Experimental results have shown the convenience on considering these new representations in the sense of feasibility maintenance and also in the sense of better approximation to the Pareto set. ©2009 IEEE.

Efficiency evaluation of ZrB2 incorporation in the MgB 2 matrix phase using high-energy milling

The present study suggests the use of high energy ball milling to mix (to dope) the phase MgB2 with the AlB2 crystalline structure compound, ZrB2, with the same C32 hexagonal structure than MgB 2, in different concentrations, enabling the maintenance of the crystalline phase structures practically unaffected and the efficient mixture with the dopant. The high energy ball milling was performed with different ball-to-powder ratios. The analysis of the transformation and formation of phases was accomplished by X-ray diffractometry (XRD), using the Rietveld method, and scanning electron microscopy. As the high energy ball milling reduced the crystallinity of the milled compounds, also reducing the size of the particles, the XRD analysis were influenced, and they could be used as comparative and control method of the milling. Aiming the recovery of crystallinity, homogenization and final phase formation, heat treatments were performed, enabling that crystalline phases, changed during milling, could be obtained again in the final product. © (2010) Trans Tech Publications.

Development of mutants of coniothyrium minitans with improved efficiency for control of sclerotinia sclerotiorum

Coniothyrium minitans (CM) is hyperparasitic to Sclerotinia sclerotiorum (SS), a pathogen of many economically important crops. In this paper, we describe the isolation of improved mutants of CM, using a UV - irradiation regime, with altered chitinase production and tolerance to high concentration of iprodione, which are effective against SS. Three out of the 59 mutants obtained inhibited the mycelial growth of CM. Infectivity of sclerotia by the new mutants was assayed by the plant-tissue-based system using carrot segments. More than 80% of sclerotia were colonized by the mutants and the wild-type CM. The mutant strains retained ability to produce significant amounts of chitinase. The mutants differed from their wild-type strain in appearance, morphology and sporulation. In conclusion, the results presented here provide evidence that the new biotypes of C. minitans are effective in controlling S. sclerotiorum.

Treatments to optimize the use of artificial insemination and reproductive efficiency in beef cattle under tropical environments

Bos indicus cattle, the preferred genetic group in tropical climates, are characterized by having a lower reproductive efficiency than Bos taurus. The reasons for the poorer reproductive efficiency of the Bos indicus cows include longer lengths of gestation and postpartum anestrus, a short length of estrous behavior with a high incidence of estrus occurring during the dark hours, and puberty at older age and at a higher percentage of body weight relative to mature body weight. Moreover, geography, environment, economics, and social traditions are factors contributing for a lower use of reproductive biotechnologies in tropical environments. Hormonal protocols have been developed to resolve some of the reproductive challenges of the Bos indicus cattle and allow artificial insemination, which is the main strategy to hasten genetic improvement in commercial beef ranches. Most of these treatments use exogenous sources of progesterone associated with strategies to improve the final maturation of the dominant follicle, such as temporary weaning and exogenous gonadotropins. These treatments have caused large impacts on reproductive performance of beef cattle reared under tropical areas. Copyright © 2011 O. G. Sá Filho and J. L. M. Vasconcelos.

Straightforward systematic approach for fuel efficiency and emissions assessment in automotive systems

At this time, each major automotive market bares its own standards and test procedures to regulate the vehicle green house gases emissions and, thus, fuel consumption. Hence, much are the ways to evaluate the overall efficiency of motor vehicles. The majority of such standards rely on dynamometer cycle tests that appraise only the vehicle as a whole, but fail to assess emissions for each component or sub-system. Once the amount of work generated by the power source of an ICE vehicle to overcome the driving resistance forces is proportional to the energy contained in the required amount of fuel, the power path of the vehicle can be straightforwardly modeled as a set of mechanical systems, and each sub-system evaluated for its share on the total fuel consumption and green house gases emission. This procedure enables the estimation of efficiency gains on the system due to improvement of particular elements on the vehicle's driveline. In this work a simple systematic mechanical model of an arbitrary smallsized hatch back was assembled and total required energy calculated for different regulatory cycles. All the modeling details of the energy balance throughout the system are presented. Afterward, each subsystem was investigated for its role on the fuel consumption and the generated emission quantified. Furthermore, the application of the modeling technique for different sets of sub-systems was introduced. Copyright © 2011 SAE International.

Efficiency and portability: Guidelines to develop websites

The use of the Internet as a means of ensuring greater visibility for products, services and information offered by companies is gaining strength in recent decades. However, it is known that to ensure satisfaction and subsequent virtual customer loyalty, it is necessary to guarantee the quality of the websites, allowing indiscriminate access regardless of the resources used, as well as rapid responses to possible requests. In order to assist this process, this paper presents a set of guidelines for the development of websites having quality characteristics, efficiency and portability as per ISO 9126 norms. An observational analysis of e-commerce websites was done which showed that they are inadequate as to the proposed guidelines, making them difficult to access available content. Therefore, the adoption of the proposed guidelines can greatly contribute to increasing the quality of websites and, consequently, enable quick and effective access regardless of the resources used.

How FTAI and FTET impact reproductive efficiency of Brazilian dairy herds

Background: Throughout dairy cows evolution, milk production was always the key point to select the superior animal. Currently, several evidences has shown that high milk production have intensively contributed to the decline of dairy cattle fertility. Beyond milk production, dairy cows have their reproductive performance impaired by another factors, heat stress and repeat-breeding. Methods like fixed time artificial insemination and embryo transfer were developed to minimize the effects of these factors, and improve dairy herds profitability. This review aims to show some key-point experiments conducted to improve the efficiency of the self-appointed protocols for artificial insemination and embryo transfer in Brazil, overcoming several reproductive problems. Our goal is to develop cheap and easy self-appointed programs that facilitate animal handling and maximize their reproductive outcomes all over the year. Review: Failure in estrus detection is the mainly limiting factor for the use of artificial insemination in high-production dairy herd. An excellent alternative to overcome the need of estrus detection is fixed time artificial insemination. Many protocols with and without the use of estradiol have been developed to that end. Among the protocols for fixed time artificial insemination without estradiol, DoubleOvsynch has been extensively used recently in American dairy herds. In Brazil, similar pregnancy rate was obtained compared to progesterone-estradiol based protocols for fixed time artificial insemination. Particularities of progesterone-estradiol based protocols as (1) new progesterone device or devices previously used for eight days; (2) different doses of eCG; and (3) the use of estradiol cypionate for fixed time artificial insemination have been studied in Brazil. The use of self-appointed artificial insemination also enabled the reduction of the interval calving-conception compared to cows inseminated following the standing estrus. Regarding the low fertility of repeat breeders and the effect of heat stress at early pregnancy, other methods like embryo transfer became important tools to enhance reproductive efficiency of Brazilian dairy herds. Protocols were also developed to allow fixed time embryo transfer, eliminating the need of estrus detection and improving the reproductive efficiency of lactating recipients. As well as described for fixed time artificial insemination treatments, there is a large variety of hormone combination for fixed time embryo transfer (with and without estradiol). An experiment conducted in Brazil demonstrated that protocols for fixed time embryo transfer without estradiol can be as good as with estradiol to synchronize high-producing Holstein recipients, essentially during summer. Particularities related to embryos cryopreservation, synchronization of the estrus cycle of donors and recipients and the site of embryo release into the uterine horn were also investigated. Greater conception rates were achieved when fresh embryos were transferred compared to frozen-thawed ones. Also, the tight synchronization between donor and recipient (same day of estrus) resulted more pregnancies than when recipients were one day later or in advantage in relation to donors. Moreover, the site of embryo release into the uterine horn (ipsilateral to the corpus luteum) had no effect on pregnancy rates after in vivo produced embryo transfer. Conclusion: Both fixed time artificial insemination and fixed time embryo transfer are important tools to improve reproductive efficiency of high-producing dairy cows. These biotechnologies help bypassing some of the greatest challenges of dairy cattle reproduction: the difficulties of estrus detection, and the low fertility associated to heat stress and repeat breeding.