101 resultados para spray volume reduction
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.
Resumo:
Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV
Resumo:
The suppression of erythropoiesis by Hydroxyurea (HU) therapy is associated with increase in mean corpuscular volume, in addition to the increase in Hb F. Monitoring the mean corpuscular volume values and the presence of macrocytosis are effective tools of adherence to the treatment with HU in patients with sickle cell anemia. The aim of this study is to monitor the mean corpuscular volume values after starting treatment with HU to determine if macrocytosis can be used as a surrogate marker of compliance with therapy. We conducted a prospective cohort study over one year with measurements of blood counts and mean corpuscular volume after starting therapy with HU in 95 patients with sickle cell anemia who were regularly followed in our ambulatory outpatient unit. In one-year of successful use of HU the mean value of the mean corpuscular volume increased significantly. The Andersen and Gill model demonstrated that the increase of one unit of MCV implies a 5% reduction in the risk of visiting the emergency room. Monitoring mean corpuscular volume values after prescribing HU alerts the provider of noncompliance in order to counsel the patient in question for better adherence to the use of HU that could improve the quality of care and to reduce morbidity and the frequency of acute pain crises and associated healthcare costs.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Objetivou-se com este trabalho avaliar a ponta XR na deposição da calda de pulverização com diferentes combinações de plantas de feijão, Brachiaria plantaginea e Bidens pilosa, em dois volumes de aplicação, com e sem a adição de surfatante Silwet. Foi utilizado como traçador o corante Azul Brilhante FDC -1 na concentração de 500 ppm para quantificar a deposição. Os tratamentos constituíram-se de sete combinações de plantas: (feijão), (B. plantaginea), (B. pilosa), (feijão + B. plantaginea), (feijão + B. pilosa), (B. plantaginea + B. pilosa) e (feijão + B. plantaginea + B. pilosa). O delineamento experimental foi o inteiramente casualizado. Foram avaliadas as pontas de jato plano XR 110015 VS e XR 11002 VS com volumes de aplicação de 150 e 200 L ha-1, respectivamente, com e sem a presença do Silwet a 0,05% v v-1. Após a aplicação, as plantas foram imediatamente coletadas e, em seguida, lavadas em 100 mL de água destilada, para posterior quantificação do traçador em espectrofotômetro. As pontas XR apresentaram comportamento distinto na deposição das gotas de pulverização nas espécies estudadas; a adição de um surfatante à calda de pulverização aumentou a uniformidade da deposição nos alvos e contribuiu para a redução do volume de aplicação.
Resumo:
This present study aimed to evaluate the deleterious effects of some commercially available spray formulations (15% Cypermethrin+25% Chlorpyriphos+1% Citronellal and 8% Cypermethrin+60% Ethion) on the reproductive parameters of engorged Rhipicephalus (Boophilus) microplus females that detached from experimentally infested cattle. The following reproductive parameters of engorged female ticks were analyzed: female weight, egg mass weight, percentage of hatchability, percentage of reduction in oviposition, percentage of reduction in hatchability, reproductive efficiency and percent control/efficacy of formulations for reproductive parameters. Our findings showed that although the strain R. (B.) microplus used in both experiments was thought to be sensitive to the test compounds because of the acaricidal efficacy observed throughout these trials, it was not possible to observe overall deleterious effects on the reproductive parameters of this tick species with both spray formulations. However, the 8% Cypermethrin+60% Ethion showed short-term significant effects on the weight of female ticks between the 14th and 16th days post-treatment and the weight of female and the egg mass weight between the 20th and 22nd days post-treatment. New studies should be conducted to show if these results regarding the reproductive parameters of fully engorged R. (B.) microplus females, combined with the acaricidal efficacy can be sufficient to reduce the number of chemical treatments administered to cattle.
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
The aim of this study was to evaluate the evolution of calibration and maintenance practices for crop sprayers on soybean production areas in Brazil, in the 2006 and 2007 seasons, based on the Project IPP data. Therefore, the evaluation covered issues related to calibration, maintenance condition and the main components of 103 sprayers distributed in the following states: Rio Grande do Sul (35), Paraná (60), and, Mato Grosso do Sul (8). The evaluations were done at the rate of one sprayer per farm. The most frequent problems were related to the pressure gauge, spray leaks and calibration errors greater than 50% of the desired volume rate. The analysis of the application rate showed a tendency for the farmers to apply volume rates below the desired value. In 2006 the errors of the application rate were significant, with 70.4% for Rio Grande do Sul State, 74.5% for Paraná State and 37.5% for Mato Grosso do Sul State. In 2007 there was a reduction of errors, with averages of 50.0% for Rio Grande do Sul and 66.7% for Paraná. In general terms, the results showed improvements on the use, maintenance and calibration processes for crop sprayers on the areas covered by the Project IPP, with reductions on average indexes for calibration errors, leaks and bad tips, among other issues.
Resumo:
This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction