Brief Report: The lincRNA Hotair Is Required for Epithelial-to-Mesenchymal Transition and Stemness Maintenance of Cancer Cell Lines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Body Composition and Net Energy Requirements for Maintenance of Non-Castrated Water Buffaloes (Bubalus bubalis)

The research aimed to estimate body contents of protein and energy and net requirements of energy for maintenance of buffaloes, slaughtered at different stages of maturity. There were used 14 Mediterranean intact males with initial average body weight of 352.2 +/- 24.3 kg and average age of 24 months. The animais were randomly divided into four experimental groups. One group was designed to slaughter at the beginning of the experimental period (IS). The animals of another group were restricting fed, receiving, individually, levels of protein and energy 15% above maintenance (RF). The animals of the two remaining groups were individually fed ad libitum (SW450 and SW500) to reach weights corresponding to 100 and 110 percent of the mature weight of the buffalo cows (respectively 450 and 550 kg). The ration contained ground-corn cobs, soybean meal, urea, minerals, and signal-grass (Brachiaria decumbens) hay, with a concentrate: roughage ratio of 50: 50 and 13% of crude protein on a dry matter basis. To estimate changes in body composition inside the range of weights included in the trial, linear regression equations of log protein (kg), fat (kg) and energy (Mcal) as a function of log empty-body-weight (EBW), in kg, were fitted. Energy requirements for maintenance were obtained as estimated heat production at zero level of energy intake. Buffaloes submitted to fattening in feedlot presented early body fat deposition, and had with the same live weight lower protein content and higher fat content and energy per unit weight than european-zebu crossbred cattle.

Effect of testicular thermoregulation on the quality of buffalo sperm

The process of spermatic division and differentiation (spermatogenesis) occurs with intratesticular temperature lower that the corporal temperature and for that is essential that the testicular thermoregulation mechanism occurs properly. For evaluation of the scrotal surface temperature can be used the infrared thermography or testicular sensors, besides that, can be evaluated the blood flux in the spermatic cord through the Doppler ultrasonography. Thus, the aim of this study is to analyze the testicular thermoregulation in adult buffaloes through scrotal thermography and Doppler ultrasound of testicular artery and verify its effect on sperm quality. For that were used seven healthy buffaloes, with age of 3 and 4 years, of the Murrah breed. The animals were subjected to 3 semen collections using artificial vagina, with one day of interval. In addiction, the retal temperature measurement (RT) with dry bulb thermometer, the measurement of scrotal surface temperature (SST) and body surface temperature (BST) through infrared thermography and the pulsatility (PI) and resistivity (RI) index of testicular artery by Doppler ultrasonography, were performed using 2 distinct moments: animals previously placed to shade (M1) and animals subjected to 4 hours of sun (M2). All parameters were compared by T test and the correlations were performed by Pearson test using the In Stat Graph Pad 3 (R) program. The significant level considered was 5%. There was an increase (p<0,05) of RT, SST, SNT and RI in M2. increasing trend was observed (0,05>p>0,01) PI and RI between M1 and M2. There was a low correlation between SST and semen quality. The results of this study allow us to conclude that adult buffaloes have low ability to perform body and testicular thermoregulation in situations of enviromental heat stress. However, this low capacity of testicular temperature maintenance demonstrated no correlation with the sperm kinetic parameters and sperm morphological defects in buffalo spermatozoa.

The Role of Implant/Abutment System on Torque Maintenance of Retention Screws and Vertical Misfit of Implant-Supported Crowns Before and After Mechanical Cycling

Purpose: This study aimed to evaluate the role of the implant/abutment system on torque maintenance of titanium retention screws and the vertical misfit of screw-retained implant-supported crowns before and after mechanical cycling. Materials and Methods: Three groups were studied: morse taper implants with conical abutments (MTC group), external-hexagon implants with conical abutments (EHC group), and external-hexagon implants with UCLA abutments (EHU group). Metallic crowns casted in cobalt-chromium alloy were used (n = 10). Retention screws received insertion torque and, after 3 minutes, initial detorque was measured. Crowns were retightened and submitted to cyclic loading testing under oblique loading (30 degrees) of 130 +/- 10 N at 2 Hz of frequency, totaling 1 x 10(6) cycles. After cycling, final detorque was measured. Vertical misfit was measured using a stereomicroscope. Data were analyzed by analysis of variance, Tukey test, and Pearson correlation test (P < .05). Results: All detorque values were lower than the insertion torque both before and after mechanical cycling. No statistically significant difference was observed among groups before mechanical cycling. After mechanical cycling, a statistically significantly lower loss of detorque was verified in the MTC group in comparison to the EHC group. Significantly lower vertical misfit values were noted after mechanical cycling but there was no difference among groups. There was no significant correlation between detorque values and vertical misfit. Conclusions: All groups presented a significant decrease of torque before and after mechanical cycling. The morse taper connection promoted the highest torque maintenance. Mechanical cycling reduced the vertical misfit of all groups, although no significant correlation between vertical misfit and torque loss was found.

Energy requirements for maintenance and growth of Caninde goat kids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Predictive maintenance of a worm reducer with an unbalanced load

Among all predictive maintenance techniques the oil analysis and vibration analysis are the most important for monitoring some mechanical systems. The integration of these techniques has potential to improve industrial maintenance practices and provide a better economic gain for industries. To study the integration of these two techniques, a test rig was set up to obtain an extreme working condition for the worm reducer used in this paper. The test rig was composed by a motor connected to a reducer through a flexible coupling and with an unbalanced load. The analysis of the results carried out by using a sample of the oil recommended by the manufacturer in extreme conditions, and using liquid contaminant is presented. From the results it was observed that if there is an abnormal instantaneous load in a system, the subsequent vibration analysis may not perceive what occurred if there was no permanent damage, which is not the case with the lubricant analysis.

Energy Requirements for Maintenance and Growth of Male Saanen Goat Kids

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Human follicle stimulating hormone (hFSH) and thyroxine (T4) in survival maintenance and in vitro growth promotion of caprine preantral follicles

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mineral requirements for growth and maintenance of F-1 Boer x Saanen male kids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adalimumab for maintenance therapy for one year in Crohn's disease: results of a Latin American single-center observational study

Adalimumab is a fully-human antibody that inhibits TNF alpha, with a significant efficacy for long-term maintenance of remission. Studies with this agent in Latin American Crohn's disease patients are scarce. The objective of this study was to outline clinical remission rates after 12 months of adalimumab therapy for Crohn's disease patients. Retrospective, single-center, observational study of a Brazilian case series of Crohn's disease patients under adalimumab therapy. Variables analyzed: demographic data, Montreal classification, concomitant medication, remission rates after 1, 4, 6 and 12 months. Remission was defined as Harvey-Bradshaw Index ≤ 4, and non-responder-imputation and last-observation-carried-forward analysis were used. The influence of infliximab on remission rates was analyzed by Fischer and Chi-square tests (P<0.05). Fifty patients, with median age of 35 years at therapy initiation, were included. Remission rates after 12 months of therapy were 54% under non-responder-imputation and 88% under last-observation-carried-forward analysis. After 12 months, remission on patients with previous infliximab occurred in 69.23% as compared to 94.59% in infliximab-naïve patients (P = 0.033). Adalimumab was effective in maintaining clinical remission after 12 months of therapy, with an adequate safety profile, and was also more effective in infliximab naïve patients.

Different extenders in the cryopreservation of bovine epididymal spermatozoa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Techniques to improve the maintenance of a laboratory colony of Nyssomyia neivai (Diptera: Psychodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anthropometric indicators predict metabolic syndrome diagnosis in maintenance hemodialysis patients

Obesity has been considered the key in metabolic syndrome (MetS) development, and fat accumulation may be responsible for the occurrence of metabolic abnormalities in hemodialysis patients. The use of gold-standard methods to evaluate obesity is limited, and anthropometric measures may be the simplest methods. However, no study has investigated the association between anthropometric indexes and MetS in these patients. Therefore, the aim was to determine which anthropometric indexes had the best association and prediction for MetS in patients undergoing hemodialysis. Cross-sectional study that included patients older than 18 years, undergoing hemodialysis for at least 3 months. Patients with liver disease and cancer or those receiving corticosteroids or antiretroviral therapy were excluded. Diagnostic criteria from Harmonizing Metabolic Syndrome were used for the diagnosis of MetS. Anthropometric indexes evaluated were body mass index (BMI); percent standard of triceps skinfold thickness and of middle arm muscle circumference; waist circumference (WC); sagittal abdominal diameter; neck circumference; waist-to-hip, waist-to-thigh, and waist-to-height ratios; sagittal index; conicity index; and body fat percentage. Ninety-eight patients were included, 54.1% male, and mean age was 57.8 ± 12.9 years. The prevalence of MetS was 74.5%. Individuals with MetS had increased accumulation of abdominal fat and general obesity. Waist-to-height ratio was the variable independently associated with MetS diagnosis (odds ratio, 1.21; 95% confidence interval, 1.09-1.34; P < .01) and that better predicts MetS, followed by WC and BMI (area under the curve of 0.840, 0.836, and 0.798, respectively, P < .01). Waist-to-height ratio was the best anthropometric predictor of MetS in maintenance hemodialysis patients.