255 resultados para pulverização agrícola
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O Brasil, terceiro maior produtor de biodiesel do mundo e terceiro maior produtor mundial de frango, pode incrementar, na sua matriz energética, o uso de óleo oriundo de aves como alternativa aos combustíveis fósseis e à redução da dependência do óleo de soja para esse fim. O país dispõe de mais de 350 milhões de litros de óleo de frango por ano. Considerando a aplicação dos combustíveis alternativos para os motores a diesel, em máquinas agrícolas, o trabalho teve por objetivo avaliar o desempenho do motor de um trator agrícola de 53kW acoplado pela TDP em bancada dinamométrica, operando com biodiesel metílico de óleo de frango e misturas com óleo diesel, sendo: B5 (testemunha), B20, B40, B60, B80 e B100. Avaliaram-se a potência, o torque, a reserva de torque, o consumo de combustível, o consumo de energia e a eficiência térmica do motor. O ensaio foi instalado com delineamento inteiramente casualizado (DIC) em esquema fatorial com seis tratamentos. Os resultados foram submetidos à análise de variância e as médias ajustadas por equações de regressão. Foram observadas perdas na geração de potência e torque, aumento no consumo de combustível, redução do consumo energético e melhoria na eficiência térmica do motor, de acordo com o aumento da proporção de biodiesel na mistura.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
A cultura da batata possui grande expressão econômica dentro do cenário agrícola. Para isso, equipamentos e técnicas de aplicação de produtos fitossanitários vêm sendo desenvolvidos visando melhorar o rendimento econômico da cultura. Neste sentido, experimentos foram conduzidos no delineamento em blocos ao acaso na cultura da batata cv. Ágata. Objetivando avaliar o efeito da assistência de ar combinada a diferentes ângulos de aplicação sobre a deposição da pulverização, bem como as perdas da calda para o solo utilizou-se um pulverizador com e sem assistência de ar junto à barra de pulverização posicionada a +30º, 0º e -30º (sinal + a favor e - contrário ao deslocamento) em relação a vertical. O volume de calda foi 400 L ha-1 utilizando-se pontas de jato cônico vazio JA-4 na pressão de 633 kPa. Para a avaliação dos depósitos utilizou-se um traçador cúprico. Os depósitos foram removidos dos folíolos por lavagem com água destilada, em ambas as superfícies foliares, nas posições superior e inferior das plantas de batata e quantificados por espectrofotometria de absorção atômica. As perdas da pulverização foram avaliadas em coletores plásticos colocados nas entrelinhas das parcelas experimentais. Os níveis dos depósitos do traçador cúprico nas diferentes posições da planta foram analisados pelo teste estatístico T² de Hotteling. Os maiores depósitos foram obtidos com a barra posicionada a 0º e +30º, em presença da assistência de ar, tanto na posição superior quanto inferior da planta. A presença do ar, além de propiciar maiores depósitos na parte inferior das plantas, possibilitou maior uniformidade na distribuição deles. As perdas da pulverização ficaram abaixo de 4%.
Resumo:
Estudou-se o efeito das pulverizações de azocyclotin por turboatomizadores Jacto Arbus 2000/Export e Arbus 2000/850, sob diferentes condições operacionais, no controle do ácaro purpúreo, Panonychus citri (McGregor), e da leprose, Brevipalpus phoenicis (Geijskes); e de Arbus 2000/Export contra o ácaro da falsa ferrugem, Phyllocoptruta oleivora (Ashmead). Foram instalados três experimentos em pomares de citros (var. Valência) no período de 1994/95. O acaricida azocyclotin na dose 25 g i.a. / 100 litros d'água foi eficiente por 52 dias no controle de B. phoenicis e por 28 dias contra P. oleivora. Variações nas condições operacionais dos turboatomizadores não influenciaram no controle dos ácaros pragas. O produto azocyclotin pulverizado a 75% da dosagem comercial com 35 bicos do tipo JA-2 (Jacto), a 3,6 km/h e na pressão de 2070 kPa proporcionaram níveis de controle equivalentes aos obtidos com 100% da dosagem comercialmente recomendada desse acaricida, até 16 dias, quando aplicado com o turboatomizador Jacto Arbus 2000/Export no controle de P. citri.
Resumo:
Conduziu-se este trabalho com o objetivo de estudar os efeitos de três sistemas de adubação (30 t. ha-1 de esterco de curral, 3,5 t.ha-1 de esterco de galinha e adubação química - 120 kg.ha-1 de P2O5 e de K2O no plantio + 60 kg.ha-1 de N em cobertura) e três épocas de colheita da cana (julho, agosto e setembro de 2003), na qualidade da matéria-prima e nos rendimentos de colmos e de açúcar mascavo de duas cultivares de cana-de-açúcar (SP79-1011 e RB72454). O experimento foi instalado em área do Alambique JM, Perdões, MG. O delineamento experimental foi o de blocos casualizados, em esquema fatorial (2 x 3 x 3), com três repetições. Não houve efeito dos fertilizantes nos rendimentos de colmos e de açúcar mascavo das cultivares estudadas. Verificou-se efeito de épocas de colheita no rendimento de colmos, com destaque para os meses de agosto e setembro. No entanto, para rendimento de açúcar mascavo nenhuma diferença foi observada. Assim, nas condições deste trabalho, é viável a substituição da adubação química pela orgânica (esterco de curral ou de galinha), sem perdas na qualidade da matéria-prima e nos rendimentos de colmos e de açúcar mascavo artesanal, sendo que os meses de agosto e setembro foram os que proporcionaram matéria-prima de melhor qualidade e maiores rendimentos de colmos.
Resumo:
O objetivo do experimento foi verificar o efeito do nitrogénio no solo, parcelado de diferentes formas e aplicado durante o período de "verão", combinado com pulverização foliar de ureia e/ou ácido giberélico, sobre a produção e qualidade de Setaria anceps Stapf cv. Kazungula. O nitrogênio (60 kg/ha/ano) foi aplicado segundo quatro formas de parcelamento: Testemunha (sem nitrogênio), N20M40 (20 kg/ha de N em novembro + 40 kg/ha de N em março), N30M30 (30 kg/ha de N em novembro + 30 kg/ha de N em março), F20M40 (20 kg/ha de N em fevereiro + 40 kg/ha de N em março). No início do período de "inverno" foram aplicados os quatro tipos de pulverizações foliares: Testemunha (sem ácido giberélico ou uréia), uréia a 2%, ácido giberélico a 50 ppm e uréia a 2% + ácido giberélico a 50 ppm. Os resultados revelaram que o parcelamento do nitrogénio no solo não influiu no aumento da produção de matéria seca do capim setária no período de "verão", apesar de proporcionar um incremento da mesma no corte de "inverno". Observou-se, ainda, uma boa distribuição da produção de matéria seca entre "verão" e "inverno", apresentando essa última estação 34,52% da produção total anual, em média. Os diferentes tipos de pulverização não influíram significativamente sobre a produção de matéria seca e a composição química bromatológica da forrageira no período de "inverno".
Resumo:
The objective of the present work was to evaluate the effect of the growth regulator chlorocholine chloride (CCC) in the control of the boll weevil (Anthonomus grandis Boheman) on cotton ( Gossypium hirsutum L. ). The experiment was conducted at the Experimental Farm of the Faculdade de Ciências Agrárias e Veterinárias (UNESP), Jaboticabal Campus, State of São Paulo, Brazil, during the 1988/1989 growing season. The experimental design used was the latin square. The chlorocholine chloride was sprayed on the cv IAC-19 cotton plants 70 days after emergence in the doses of 0, 25, 50, and 100 g/ha in a single application as well as 25 g/ha + 25 g/ha in two applications. The second application was 15 days after the first. There was no significant differences on cotton yield. Although the split application as well as the single application of 25 g/ha increased yield in 11.6% and 11.5%, respectively.These same treatments also increased earliness. After the last hand harvest the number of immature cotton bolls left in the field was 64.5% lower in the plots treated with chlorocholine chloride. Despite the higher earliness and the reduction of the number of immature cotton bolls, the chlorocholine chloride treatments were not sufficient to induce an effective aid in the boll weevil control but indicates a possibility of using growth regulators in the cotton crop as an auxilary strategy in integrate pest management programs.
Resumo:
This study evaluated the characteristics of spray produced by Yamaho nozzle tip'D'series. The droplet size of nozzle tips D3, D4, D5, D6 and D8 were evaluated at 703, 1.050, 1.406, 1.758, 2.110, 2.461 e 2.813 kPa pressures (100, 200, 250; 350, e 400 psi) by means of laser equipment, as well as the flow rate of nozzle tip at the pressures of 702, 1.125, 1.406, 1.828, 2.110, 2.532 e 2.813 kPa (100, 160, 200, 260,300; 360 e 400 psi) which were compared with values indicated by manufacturer. The droplet produced at all pressures presented a very fine spray, which in agriculture may promote losses by evaporation and drift. For all nozzle tips, except D8 in pressures 1.828, 2.532 e 2.813 kPa, the difference between the observed flow rate indicated by the manufacturer was higher than 5%. The paper demonstrates that the nozzle tip tested, in spite of not having uniform flow rate, may promote the contamination of spray operator and environment due to the droplet spectrum produced.
Resumo:
Plan disease control techniques are used through the irrigation water, which reduces the labor and it improves application uniformity with smaller contact of the operator with toxic products, lower environmental impact and lower production cost. In order to control Botrytis cinerea the lisianthus culture, this work aimed to evaluate two fungicide application methods with different treatments. The fungicides were: thiophanate methyl (50 g i.a. L-1), thiophanate methyl + chlorothalonil (50 g i.a. L-1 + 35 g i.a. L-1) and iprodione (50 g i.a. L-1). Number of lesions, number of diseased floral buttons and height of the lisianthus plants were evaluated. It was possible to deduce, that in the growth stage (number of lesions in the plant) as well as in the final stage (number of floral buttons) of the lisianthus culture, the most efficient treatments were 2 (thiophanate methyl + chlorothalonil) and 3 (iprodione). Considering that treatment 2 is a mixture of two fungicides, a systemic and a contact one, independently of application methods, the mixture increased efficiency in relation to treatment 1 (thiophanate methyl). Thus, chemigation was as efficient as spreading technique.
Resumo:
The chemical and physical degradation of the soils by salinity and sodicity problems constitutes a serious obstacle in productive irrigated areas in arid and semi-add regions. In order to eval mate the effect of gypsum on electrical conductivity, pH, exchangeable sodium percentage, sodium, calcium and magnesium content in saturation extract and exchangeable sodium of two saline-sodic soils: one from irrigated Perimeter Engenheiro Arco Verde in the municipality of Condado and another from irrigated Perimeter of São Gonçalo, in the municipality of Sousa both in the Paraiba State Brazil, an experiment was carried out in green house of the Departamento de Solos e Engenharia Rural, Centro de Ciências Agrárias, Universidade Federal da Paraíba, Areia, Brazil, in a factorial design 2 × 5 referring the two soils and five gypsum levels equivalent to 0; 3.2; 6.3; 9.4 and 12.5 g kg-1 to each soil. The gypsum application exercised positive effects on reduction of salinity and sodicity. The values of electrical conductivity, exchangeable sodium percentage, pH and contents of soluble and exchangeable sodium in relation to data of the soils before application of treatments with gypsum in both the soils were found to decrease.
Resumo:
The objective of this study was to evaluate the dynamic performance of an agricultural tractor utilizing distilled biodiesel (50% ethylic + 50% methylic) as a function of the proportion of biodiesel and diesel of petroleum (0 and 100%, 5 and 95%, 15 and 85%, 25 and 75%, 50 and 50%, 75 and 25% and 100 and 0%), respectively. This research was done in the area of the Department of Rural Engineering of the Paulista State University (UNESP), Jaboticabal Campus, SP, located in the latitude 21° 14′ 28″ S and longitude 48° 17′12″ W. A tractor 4 x 2 FWA was used, with a 73.6 kW (100 HP) motor and a ballast tractor. The biodiesel used was produced from spent oil from food frying. The experimental design was entirely randomized, with 7 treatments and 5 repetitions, totaling 35 observations. The results showed that the biodiesel and diesel blend significantly influenced the hourly volumetric consumption, hourly mass consumption, fuel consumption per worked area and specific fuel consumption variables. When the tractor operated with 100% of biodiesel (B100) the specific fuel consumption increased 18% on average in relation to diesel (B0).
Resumo:
Sugarcane is one of the most important crops of the Brazilian agribusiness and this importance justifies the use of techniques that allow the implementation of cultivation systems capable of reducing the variability of soil characteristics and the establishment of efficient agricultural planning. The aim of the present work was the planning and implementation of cultivation systems for sugarcane using geostatistical techniques, in the Pereira Barreto region, SP. An area of 505 ha was mapped using the global positioning system (GPS) and a Digital Elevation Model was elaborated (MDE). Soil samples were collected for 0-0.25 m depth, in each 7 ha, for their chemical attributes and texture characterization. Data were analyzed by descriptive statistics and geostatistics. The determination of the spatial distribution of soil granulometric and chemical attributes allowed the allocation of the studied sugarcane varieties according to soil fertility and clay content. The kriging maps of soil granulometric and chemical attributes brought useful information to the establishment of production environments with different soil and crop managements. The identification of different environments by means of geostatistical techniques allowed the precise planning of the sugarcane cultivation, as well as the adequacy of fertilization practices and the allocation of suitable sugarcane varieties adapted to the conditions imposed by differences in the soil attributes.
Resumo:
The goal of this research was to evaluate two tips of spraying nozzles (hollow cone nozzle and two flat fan nozzle annexed to a nozzle body DUO) and three spray volumes (100, 150 and 200 dm3 ha-1), whose application was for the control of the Asian soybean rust. An area of 288 m 2 was used, with a randomized blocks design in a factorial 2×3 with 4 repetitions, total of 24 experimental parcels of 12 m2. For the spraying with hydraulical nozzles a costal spray of constant pressure kept by C02 compressed with bar of 2 m was used. The analysis of the covering percentage was carried through by means of the use of hidro-sensible paper, that was placed in three position of the plant what it represents, in height, the third superior, average and inferior of the canopy. For both the third no interaction between the evaluated factors, was found and meither difference statistics between the spraying tips and the volumes. In absolute values the twin flat fan nozzle DUO presented minimum difference of covering in relation to the hollow cone nozzle, and for the spray volume of 200 dm3 ha -1 presented greater covering percentage.
Resumo:
Soil use for the development of activities as agriculture and livestock has been causing great alterations in the environment, mainly when these are practiced intensively, disrespecting the fragility and aptitude of the natural resources. Therefore, it is essential that the planning of the agricultural activities is done, taking into consideration the several environmental criteria involved in the decision-making process. Thus, this study aimed to analyze the agricultural aptitude classes of lands from a watershed through geographical information system (GIS). The Arroio Ajuricaba watershed is located in the Municipality of Marechal Cândido Rondon - PR among the coordinates UTM 787309m E and 793892m E; 7275026m N and 7281310m N, in the Spindle 21, presenting an area of 1681ha. Soil maps, in semi detail scale, was the digital cartographic base used. The results allowed to conclude that 42.41% of the basin presented a good aptitude for farming in handling level of high technology (handling level C), regular aptitude for B, and restricted aptitude for A [class 1(a)bC] and that 12% of the area had regular aptitude for farming in the three handling levels (class 1abc). The watershed lands (14.24%) presented regular aptitude for farming in handling level C, restricted aptitude for B, and inapt for A [class of aptitude 2(b)c]; 15.85% presented good aptitude for planted pasture (class 4P) and 12.21% were considered without aptitude for agricultural use (class 6). We can say that 71.94% of the lands has aptitude for farming, although they present different degrees of limitations that request different treatments for its conservation.