Efeitos da ocupação e uso da terra na bacia do córrego da Servidão, no cenário de 1995-2006

Urban sprawl developed without adequate urban planning and lack of knowledge about the physical characteristics of an environmental system, results in soil sealing and consequent change in the dynamics of hydrological watershed. Thus, this study aimed to analyze the behavior of the runoff basin Cóorego DA Servidão located in Rio Claro, referring to the year of 1995 compared to the scenario of 2006, compared the different features of urban use logged area. Therefore understanding the dynamics of the flow was possible through the use of software IPHS 1 that allowed through hydrologic models to evaluate the behavior of the surface area investigated, using Spring 4.3.3 software which enabled the classification of land use and software ArcGis 9.3 which was used for the quantification of stretches of water, separated from those that are channeled and those who did not suffer interference from the pipe

Análise microestrutural de tubos API N80 soldados pelo processo HF/ERW para prospecção de petróleo e gás

On the grounds of the great advances achieved over recent years, the process HF/ERW (High-Frequency/Electric Resistance Welding)welded pipe have played an active role in the oil and gas industry for deep water applications, at high and extremely low temperatures, under high pressure and in highly corrosive environments, gradually replacing manufactured pipes by other processes. However, studies have shown that defects in the welded joints are a the leading causes of pipelines failures, which has required the determination of toughness values in this region, in compliance with the strict recommendations of the codes and standards with manufacturers and construction companies, on the oil and gas sector. As part of the validation process required toughness values, this research project focuses on a microstructural analysis in HF / ERW tubes microalloyed, steel grade API 5CT N80, designed to explore oil and gas in deep waters, the subject of strategic relevance to the country because of the recent discoveries in the Santos mega fields: Tupi and Libra (pre-salt). In this scientific work will be presented and discussed the results of mechanical tensile and Charpy, a few CTOD tests curves (showing the trend of toughness values to be obtained), and the microstructures of the base material obtained by optical microscopy, with special emphasis on the formation of non-metallic inclusions in the welded joint

Modelagem do resfriamento para a zona termicamente afetada pela soldagem de tubos de aço carbono

Because the high consumption of welded pipe for exploration and conduction oil and gas, optimization of manufacturing processes is necessary to obtain better productivity, efficiency and cost reduction. The objective of this study is to analyze the forms of heat transfer during the welding of pipes using longitudinal submerged arc process them to propose a model for the temperature distribution in the welded region. For this analysis are addressed as the heat transfer modes operate in the specified welding process and the necessary considerations for the mathematical model were obtained. The calculations were performed and the simulations needed to obtain the temperature distribution in the tube were carried out. Therefore, the practice was satisfactory and the results showed a range of temperatures along the pipe for a particular model and the future suggestions for improvement of this work

Análise dos métodos de cálculo de golpe de ariete em tubulações

This work studies the most commonly used methods and make comparisons and discussions of the findings made by each of them and the results provided by them. The objective of this research was to show that the method of characteristics is currently the most efficient method to perform these simulations because of its broad scope low simplifications, requirement allowing to consider every detail of the pipe and fluid. Manual calculations are performed and also a software capable of calculating this phenomenon for various situations, such as water pump, elevated tanks, valves and quick maneuver was developed. The software is based on the method of characteristics that is currently recommended by ABNT. These methods, and the results are obtained numerically and graphically are adopted pipes and amount of downstream conditions and in which will be applied. The conclusions reached showed that the Allievi method is widely used yet because of its efficiency and quick calculation for simple pipes. The method of characteristics, although a lot of work to be calculated due to the calculation is iterative process and requires a program to use it, is the only one that allows the calculation with all amount to the conditions situations and downstream of all the pipe possibilities found

Desenvolvimento de um simulador virtual de vazamento para testar correlacionadores acústicos comerciais

Pós-graduação em Engenharia Mecânica - FEIS

Estudo do comportamento em fadiga de um tubo de aço microligado, grau API 5L X70

This work focuses on a study on the fatigue behavior of a microalloyed steel API 5L X70, used in pipes lines to transport oil and gas. These types of steels have excellent mechanical resistance values and ductility and therefore increased their study driven by increased demand for oil and especially natural gas, which consequently raises the need to build new pipelines to transport these products. The oil extraction units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 to 30 years in the marine environment, a hostile environment for high pressure, corrosion, low temperatures and the stresses caused by the movement of water and tides. For analysis, the S-N (stress versus number of cycles) curves were obtained from data collected from bodies-of-proof cylindrical longitudinal, transverse and that one removed from the weld area of the pipe, tested in accordance with ASTM E466. Tensile tests were performed for characterizing the mechanical properties of the samples and welded joints, concluded that the values meet the specifications of the standard API 5L. To characterize microstructural material, also metallographic analysis was made of regions of the base metal and the HAZ. The results of fatigue tests demonstrated a higher life for the specimens removed from the longitudinal direction the pipe, followed by those in the transverse direction and, finally, the welded joint. The origins of the fatigue cracks were determined by scanning electron microscopy (SEM)

Assessment of a new infrared laser transillumination technology (808nm) for the detection of occlusal caries-an in vitro study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização técnica e desempenho hidráulico de quatro gotejadores autocompensantes utilizados no Brasil

This study aimed to characterize and evaluate the performance of four models self-compensating drippers commonly used in drip irrigation systems in Brazil. To perform the study it was taking a sample of 25 emitters of each model. Evaluating their tubes (b) coefficient of manufacturing variation (c) wall thickness, (d) characteristic equation of the dripper, (e) internal diameter of the pipe, (f) spacing between emitters, (g) resistance water pressure at ambient temperature and to 40°C and (h) the tensile strength of the pipe with tension of 160 N and 180 N. The analysis showed variation coefficient of less than 0.045 for all manufacturing drippers (0.07 is maximum according to ABNT NBR ISO 9261). The exponents x of the equation pressure versus discharge ranged from 0.0082 to 0.0691 classifying them as self-compensating. From the results obtained it is clear that the tested products which are used in Brazil and used by irrigators had a satisfactory hydraulic performance in accordance with the standard.

Índice geométrico e perda de carga localizada em conexões de emissores "online"

The objective of this research is to present a study on a relationship between the local head loss in connection of emitters in pipes with different diameters used in drip irrigation, with the online geometry of the emitter connectors, that allows an easy quantification of such head loss regarding of the size of the connectors. The experiment was carried out according to the Reynolds Numbers at a turbulent flow interval, obtained by the variation of the pipe outflow at a constant temperature of water. The results indicated that the friction factor of the Darcy-Weisbach equation can be estimated by the Blasius equation with the coefficients b = 0.300 and m = 0.25, for the above mentioned pipes. The head losses produced by the connections of the emitters, in relation to the pipe without emitter, was of 62%. A relationship between the kinetic load coefficient (K) and the index of blockage (IO) provoked by the online connector is presented by an algebraic equation which shows a coefficient of adjustment of approximately 96%.

An investigation into the effects of resonances on the time delay estimate for leak detection in buried plastic water distribution pipes

In water distribution systems, old metallic pipes have been replaced by plastic pipes due to their deterioration over time. Although acoustic methods are effective in finding leaks in metallic pipes, they have been found to be problematic when applied to plastic pipes due to the high damping within the pipe wall and the surrounding medium. This is responsible for the leak signal not traveling long distances. Moreover, the leak energy in plastic pipes is generally located at a narrow frequency range located at low frequencies. However, the presence of resonances can narrow even more this frequency range. In order to minimise the influence of background noise and resonances on the calculation of the time delay estimate, band-pass filters are often used to supress undesirable frequency components of the noise. The objective of this paper is to investigate the influence of resonances in the pipe system (pipe, valves, connections and hydrants), on the time delay estimate calculated using acoustic signals. Analytical models and actual leak data collected in a bespoke rig located in the United Kingdom are used to investigate this feature.

Análise da suscetibilidade a corridas de massa aplicada a dutovias: estudo de caso na bacia do Ribeirão do Roque

This scientific research aimed at to analyse the susceptibility to debris flow of the watershed of Ribeirão do Roque (SP), focusing on the upstream areas of OSBRA pipeline. This is because, mass flow can cause damage to pipes, mainly due to conditioning hydro erosion of the land in the drainage crossings, including the undermining the banks of streams. Firstly, It was conducted a literature review, aiming to identify and understand the principal characteristics and conditions of debris flow. Secondly, the physical and anthropic factors and their respective weights of influence were selected and used to determine the mass flow susceptibility. It was selected the following physical factors: type and thickness of rocks, soil and unconsolidated materials; textural density; amplitude relief; relief slope; shaped valley; and shape of slopes. Such factors are present in the physiographic subdivision map of the study area. In addition, the anthropic attributes correspond to the classes contained in the land use map. Therefore, the physical and anthropic factors were integrated through the multi-criteria analysis in a GIS environment, generating a total susceptibility map of debris flow on the scale 1:50,000. The results showed that a significative part of the study area was classified as average susceptibility. However, it was identified areas with high susceptibility in the region in which the pipe cross the Ribeirão do Roque. Moreover, at which point the river presents a closed valley and a meander shape, without a fluvial plain that would be useful to attenuate the development of the process. Consequently, if a mass flow begins in any of these most susceptible regions located upstream of the pipe, the chances that the process develops by the river and causes the excavations of his bed are quite large. However, the pipelines cross these critical areas directly on the rock (diabase), which provides additional protection against possible ...

Cultura organizacional, inovação e gestão ambiental: integrando conceitos para a edificação de organizações sustentáveis

The main purpose of this article is to relate two among the most important themes of the current organizational dynamic: organizational culture, innovation and environmental management. Great part of the literature about environmental management and environmental innovation refers to organizational culture as the most arduous wall or the most significant element to develop effective practices of business environmental management. However, relationship among such concepts is, many times, superficial or camouflaging the necessary analytic depth. To solve this challenge, this article integrates the levels of the organizational culture (workmanships, values and presupposed unconscious), the typologies of environmental innovation (total productivity of resources, innovations for the segregation of materials and articulation of bio-systems), and the environmental technologies (end-of-pipe, environmental measurement, pollution prevention and zero-impact technology). Recommendations and challenges for the continuity of this research are registered.

Influência de poliacrilamida na redução da perda de carga em tubulação de polietileno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características do aço API X70 utilizado em tubos de transporte de petróleo e gás

Having in mind that petroleum's history presents a huge growth, the exploration and production areas have been receiving lots of investments, in order to attend the increasing demand for gas and petroleum. Looking through that scenario, new technologies have been evolving in favor of discovering new natural petroleum deposits and act with effectiveness in truly deep waters without giving up the worldwide best operational security practices. The use of rigid pipes in marine installations have been rising quickly and, thanks to this reality, the many storage and pipe launching forms became study objects and are getting improved. The analysis of steel API X70 characteristics, proving that they are suitable for use in pipes developed to transport gas and petroleum is the theme of this presentation. A tensile test was conducted to determine the base metal's mechanical properties, draining's tension, traction's resistance, elasticity's modulus and maximum tension. An aspect that is concerning too is the metallographic analysis, in order to determine the studied iron's microstructure. Results of analyzes showed that the steel has high resistance, with good capacity for deformation and well defined yield point, concluding suitable for the application in question