Efeitos do treinamento isocinético e isométrico sobre a taxa de desenvolvimento de força máxima

The objective of the present study was to compare the effects of a high speed isokinetic training (180°.s-1) and an isometric training (75°) on the maximum rate of force development (RFDmax) measured in the isokinetic and isometric modes. Twenty seven male non active subjects participated of this study (Mean + SD = body mass 78.6 + 14.1 kg; stature 175.1 + 8.9 cm; age 22.6 + 3.8 years). They were randomly divided into three groups: Control (GC); Isokinetic training (GISOC) and; Isometric training (GISOM). The subjects were submitted in different days to the following pre training protocols: 1) Familiarization to the isokinetic dynamometer tests; 2) Five maximum concentric isokinetic contractions of the knee extensors (180°.s-1) to access the maximum concentric torque (TMC) and the concentric RFDmax; 3) Two maximum isometric contractions of the knee extensors (75°) to access the maximum isometric torque (TMI) and the isometric RFDmax. The same tests were repeated after the training period, but without the familiarization session. Eighteen training sessions were performed (3 times per week). The GISOC performed the entire training whit concentric isokinetic contractions whit the speed of 180°.s-1. The GISOM performed the entire training whit isometric contractions whit the angle between the thigh end the leg being 75° (0° = full knee extension). TMI, TMC, concentric RFDmax, isometric RFDmax values of the GC was not different between pre and post training. GISOM increased only the TMI and the GSIOC increased the TMC, concentric RFDmax and isometric RFDmax. Furthermore, the GISOC had a higher percentage increase of the isometric RFDmax than the isokinetic RFDmax. Based on these results, it is possible to conclude that the increase in maximum strength corresponded to the training specificity theory, unlike to the RFDmax. Thus the use of isometric contraction ...(Complete abstract click electronic access below)

Implementação do algoritmo de Newman para identificação de comunidades em placas gráficas

Communities are present on physical, chemical and biological systems and their identification is fundamental for the comprehension of the behavior of these systems. Recently, available data related to complex networks have grown exponentially, demanding more computational power. The Graphical Processing Unit (GPU) is a cost effective alternative suitable for this purpose. We investigate the convenience of this for network science by proposing a GPU based implementation of Newman community detection algorithm. We showed that the processing time of matrix multiplications of GPUs grow slower than CPUs in relation to the matrix size. It was proven, thus, that GPU processing power is a viable solution for community dentification simulation that demand high computational power. Our implementation was tested on an integrated biological network for the bacterium Escherichia coli

Análise dosimétrica de aplicadores de Betaterapia

Betatherapy is a special medical technique using a radioactive source of strontium-90 for the treatment of superficial lesions, especially in dermatology and ophthalmology. Strontium-90 sources emit β radiation, which possesses high ionization power, but a very short distance propagation into matter. This work presents a method of dosimetric analysis of betatherapy using strontium- 90-based instrumentation, commonly used against superficial diseases, such as keloid and pterygium, aiming the description of the dosimetry analysis procedures, which can be easily implemented on tradiotherapy services that offers the betatherapy treatment. IBF-MEDIX radiographic films (conventional films) were exposed to betatherapy applicators during different time intervals according to the activity of the source, and afterwards the optical densities (O. D.) of the radiographic images were measured using an optical densitometer MACBETH. Therefore, the parameters used to make the dosimetric analysis in betatherapy were standardized, as the exposure time depended on the geometry and size of the source, providing an efficient and fast method of dosimetric analysis of the betatherapy equipment of the services, the majority of which do not have the scientific structure to perform this study

Parâmetros clínicos e laboratoriais relacionados ao prognóstico em cães com gastroenterite hospitalizados

Pós-graduação em Cirurgia Veterinária - FCAV

Síntese de tetra-hidropiridinas por meio de reações multicomponentes

Multicomponent Reactions are defined as reactions between three or more reagents in a single reaction step in the same reaction vial, forming a product that includes the majority of atoms and structural characteristics of the reagents. Thus these reactions save time and energy. One of the ways to improve the yield and reaction time of a multicomponent reaction is to use different catalysts, an example of catalyst that shows great potential and has been studied in recent years is the molecular iodine is known to be a Lewis acid with high catalytic power. The functionalized piperidines, also known as tetrahydropyridines, are alkaloids that have pharmacological potential, this is due to the piperidine ring present in many natural product structures with muscarinic activity, nicotine, analgesic, antipsychotic, anti-proliferative, among others. In this paper we describe studies about on the application of molecular iodine (I2) in the multicomponent reaction between aniline derivatives, benzaldehyde and β-ketoester (methyl acetoacetate) for the synthesis of functionalized piperidines and the synthesis of a corresponding piperidone by acid hydrolysis. Data analysis allowed us to demonstrate the efficacy of molecular iodine in the synthesis of functionalized piperidines, obtaining results with yields 44-87% and short reaction time of 8 to 24 hours, and the efficacy of acid hydrolysis of enamine in the structure of the tetrahydropyridine derivative in a yield of 81%

Reversão sexual de tilápias gift criadas em hapas e submetidas a diferentes taxas de alimentação em alta frequência

Pós-graduação em Zootecnia - FMVZ

Diversidade clínica, epidemiológica e Genética do Mycobacterium tuberculosis na região Noroeste paulista

Pós-graduação em Genética - IBILCE

Efeito de treinamento de saltos verticais e do destreinamento sobre a expressão gênica de vias energéticas da musculatura esquelética de ratos Wistar induzidos à obesidade

Pós-graduação em Fisioterapia - FCT

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

Automação do fornecimento de ração para organismos aquáticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de polimorfismos INDELs na identificação humana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aportes teóricos e metodológicos para a constituição de um grupo de planejamento conjunto com docentes da licenciatura em física

We present in this paper parts of the results of a research that had the intention to promote a space of communicative interaction among teachers of an undergraduate Course of Physics Teaching so they could plan their courses together. From the theoretical recommendations of the Theory of Communicative Action , by Jürgen Habermas , it was possible to draw a way of rationality crisis in training degree in physics in Brazil and then propose the creation of a Joint Planning Group (JPG) with teachers of specific nature disciplines of physics and disciplines about physics teaching. They start a joint discussion about the relationship among the disciplines in delivering of a project for future high school teachers' training. All meetings developed over a school year in the GPC were recorded, transcribed and analyzed with a part of a methodological analysis feature of the intersubjective interactions. This methodology was developed specifically for the research. The conclusions are related to the joint constructions developed by the JPG, its local contexts and the possibility of extension of this group. The joint constructions undertaken in the group point to the defense of the formation of JPG in the formation of the professors who teach these courses.

Ocorrência de lesões de ligamentares e músculo tendíneas ao longo das fases do ciclo menstrual de atletas de alto redimento: um estudo de caso longitudinal

Female athletes are more susceptible to injury when compared with males. This increased risk of injury, may be caused by fertile-menstrual cycle. The aims of this study were to investigate the prevalence in the occurrence of muscle-tendon and ligament injuries in different phases of the menstrual cycle over a period of high performance sports training and identify possible differences of occurrences between the phases. Fifteen female athletes, members of a women's basketball team, with ages between 15 and 22 years (average 17.5 ± 2.6 years), with regular menstrual cycles and daily practitioners of training, received follow-up during the menstrual cycle for 5 months. During the period were noted occurrences of injury in relation to the menstrual period of each athlete. The results showed 13 injuries, all of anterior cruciate ligament. The distribution of percentage values indicated a significantly higher risk of athletes suffer injuries in the follicular phase. The result makes us believe that significant elevations in the concentrations of estrogen in this fertile menstrual cycle phase, more open women to a higher risk of performing different injuries.

Evolução tectônica e estratigráfica das bacias da margem continental do Uruguai

Pós-graduação em Geociências e Meio Ambiente - IGCE

Impactos causados por vibrações mecânicas em chapas de alumínio no processo de laminação a frio

This paper purpose is to analyze one of the main problems faced by cold rolling industry of the current time, the mechanical vibration. Factors such as strips with high velocity in order to increase the productivity and thickness becoming thinner and thinner cause the vibrations to be present at all times during rolling. These market requirements also drive the industry for technology development and thus bring the challenges that the operation of a new modern equipment and more powerful. The initial purpose is to analyze the forces that cause vibration in a rolling mill type four high with two stands, where is desirable to identify the origins of these vibrational forces to make possible dismiss them or at least control its intensity, in order to prevent damage in the rolling mill and ensure product quality to the customer. For it, will be used instruments to record and store the vibrations that occur during the lamination process. With this data will be able to analyze the characteristics of the vibrations and act at your elimination. At the end of the work is expected to demonstrate how important the critical view of the engineer in the analysis of graphics combined with the calculations of the natural vibration frequency and engagement of key parts of the laminator. With these two tools at hand, will be possible to increase the productivity of the rolling mill and act preventively in maintenance, thereby reducing your downtime and increasing its performance and efficiency