The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution

Purpose: To evaluate the influence of the geometry and design of prosthetic crown preparations on stress distribution in compression tests, using finite element analysis (FEA). Materials and Methods: Six combinations of 3D drawings of all-ceramic crowns (yttria-stabilized zirconia framework and porcelain veneer) were evaluated: F, flat preparation and simplified crown; FC, flat preparation and crown with contact point; FCM, flat preparation and modified crown; A, anatomical preparation and simplified anatomical crown framework; AC, anatomical preparation and crown with contact point; and ACM, anatomical preparation and modified crown. Bonded contact types at all interfaces with the mesh were assigned, and the material properties used were according to the literature. A 200 N vertical load was applied at the center of each model. The maximum principal stresses were quantitatively and qualitatively analyzed. Results: The highest values of tensile stress were observed at the interface between the ceramics in the region under the load application for the simplified models (F and A). Reductions in stress values were observed for the model with the anatomical preparation and modified infrastructure (ACM). The stress distribution in the flat models was similar to that of their respective anatomical models. Conclusions: The modified design of the zirconia coping reduces the stress concentration at the interface with the veneer ceramic, and the simplified preparation can exert a stress distribution similar to that of the anatomical preparation at and near the load point, when load is applied to the center of the crown.

Estimation of a preference map of new consumers for spatial load forecasting simulation methods using a spatial analysis of points

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Studies on the application of Myceliophthora thermophila JCP1-4 cellulases cocktail on sugarcane bagasse pretreated by different methods

The hydrolysis step for sugar production in biorefineries is crucial for the sequential processes involved and cellulases cocktails behave differently according to the pretreatment employed. In this study, the application of the cellulases cocktail produced by the fungus Myceliophthora thermophila JCP1-4 was studied on the saccharification of sugarcane bagasse pretreated by ozonolysis and thermic ferric nitrate (TFN), and the results were compared with commercial enzymes (Novozymes Celluclast 1.5L, Novozym 188). The fungal cellulases cocktail hold an activity of FPU:β-glucosidase of 1:4(U/mL); time, temperature, FPU by g of cellulose load and percentage of dry matter (DM) were studied. The analysis of central composite design of TFN pretreated showed that fungal cellulases works better in DM values of 3–3.5% (4.5% for commercial), temperatures higher than 50 °C (<45 °C for commercial) and 15FPU for both; commercial enzymes yielded 7.78 g/L of reducing sugars and the fungal enzymes 5.42 g/L. With the ozone pretreated, the fungal enzymes presented a higher thermostability with faster kinects, being able to produce 5.56 g/L of reducing sugars (60 °C, 8 h), against 5.20 g/L for commercial enzymes (50 °C, 24 h), (10FPU, 3%DM for both). The FPU derivate analysis revels better yields with 7.5FPU, and the increase of DM to 7.5% resulted 13.28 g/L of reducing sugars.

Elementos de interoperabilidade na perspectiva da catalogação descritiva

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Weed suppression in the formation of brachiarias under three sowing methods

The success of conservation systems such as no-till depends on adequate soil cover throughout the year, which is possible through the use of cover crops. For this purpose the species belonging to the genus Urochloa has stood out by virtue of its hardiness and tolerance to drought. Aiming ground cover for the no-till system, the objective was to evaluate the establishment of two species of the genus Urochloa, in three sowing methods, in the weed suppression and the sensitivity of these forages to glyphosate. The study design was a randomized block with a 2 x 3 x 3 factorial arrangement, in which factor A was composed of Urochloa ruziziensis and Urochloa hybrid CIAT 36087 cv. Mulato II, factor B was formed by sowing methods: sown without embedding, sown with light embedding and sown in rows, and factor C was composed of three doses of glyphosate (0.975, 1.625 and 2.275 kg ha(-1) of acid equivalent). For determination of weed suppression, assessment of biomass yield and soil cover was performed, by brachiaria and weeds, at 30, 60, 90, 120 and 258 days after sowing. Visual assessment of the desiccation efficiency at 7 and 14 days after herbicide application was performed. It is concluded that embedding Urochloa seeds stands out in relation to sowing in the soil surface. Urochloa ruziziensis is more efficient in the dry weight yield, weed suppression, in addition to being more sensitive to glyphosate herbicide.

Validation of mechanical, electrical and thermal nociceptive stimulation methods in horses

To validate a model for investigating the effects of analgesic drugs on mechanical, thermal and electrical stimulation testing. To investigate repeatability, sensitivity and specificity of nociceptive tests. Randomised experiment with 2 observers in 2 phases. Mechanical (M), thermal (TL) and electrical (E) stimuli were applied to the dorsal metacarpus (M-left and TL-right) and coronary band of the left thoracic limb (E) and a thoracic thermal stimulus (TT) was applied caudal to the withers in 8 horses (405 ± 43 kg). Stimuli intensities were increased until a clear avoidance response was detected without exceeding 20 N (M), 60°C (TL and TT) and 15 V (E). For each set of tests, 3 real stimuli and one sham stimulus were applied (32 per animal) using a blinded, randomised, crossover design repeated after 6 months. A distribution frequency and, for each stimulus, Chi-square and McNemar tests compared both the proportion of positive responses detected by 2 observers and the 2 study phases. The κ coefficients estimated interobserver agreement in determining endpoints. Sensitivity (384 tests) and specificity (128 tests) were evaluated for each nociceptive stimulus to assess the evaluators' accuracy in detecting real and sham stimuli. Nociceptive thresholds were 3.1 ± 2 N (M), 8.1 ± 3.8 V (E), 51.4 ± 5.5°C (TL) and 55.2 ± 5.3°C (TT). The level of agreement after all tests, M, E, TL and TT, was 90, 100, 84, 98 and 75%, respectively. Sensitivity was 89, 100, 89, 98 and 70% and specificity 92, 97, 88, 91 and 94%, respectively. The high interobserver agreement, sensitivity and specificity suggest that M, E and TL tests are valid for pain studies in horses and are suitable tools for investigating antinociceptive effects of analgesics in horses.

Joint economic design of X̄ and R control charts for processes subject to two independent assignable causes

A model for the joint economic design of X̄ and R control charts is developed. This model assumes that the process is subject to two assignable causes. One assignable cause shifts the process mean; the other shifts the process variance. The occurrence of the assignable cause of one kind does not block the occurrence of the assignable cause of another kind. Consequently, a second process parameter can go out-of-control after the first process parameter has gone out-of-control. A numerical study of the cost surface to the model considered has revealed that it is convex, at least in the interest region.

A relação das tendinopatias do manguito rotador com as atividades cotidianas: uma contribuição para o design ergonômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Brazilian community health agents and qualitative primary healthcare information

The aim of this study was to explore female community health agents’ views about the value of recording qualitative information on contextual health issues they observe during home visits, data that are not officially required to be documented for the Brazilian System of Primary Healthcare Information. Background: The study was conducted in community primary healthcare centres located in the cities of Araçatuba and Coroados (state of São Paulo) and Rio de Janeiro (state of Rio de Janeiro), Brazil. Methods: The design was a qualitative, exploratory study. The purposeful sampling criteria were being female, with a minimum of three years of continuous service in the same location. Data collection with 62 participants was conducted via 11 focus groups (in 2007 and 2008). Audio files were transcribed and submitted to the method of thematic analysis. Four themes guided the analysis: working with qualitative information and undocumented observation; reflecting on qualitative information; integrating/analysing quantitative and qualitative information; and information-sharing with agents and family health teams. In 2010, 25 community health agents verified the final interpretation of the findings. Findings: Participants valued the recording of qualitative, contextual information to expand understanding of primary healthcare issues and as an indicator of clients’ improved health behaviour and health literacy. While participants initiated the recording of additional health information, they generally did not inform the family health team about these findings. They perceived that team members devalued this type of information by considering it a reflection of the clientele’s social conditions or problems beyond the scope of medical concerns. Documentation of qualitative evidence can account for the effectiveness of health education in two ways: by improving preventative care, and by amplifying the voices of underprivileged clients who live in poverty to ensure the most appropriate and best quality primary healthcare for them.

Design & seleção de materiais: elaboração e execução de um sistema de informações para projeto do produto: madeiras

Wood is a renewable material and has unique characteristics that stem from its orthotropic properties. The objective of this study was to develop and implement an informational Selection of Materials and Manufacturing Processes appropriate to the activity of Product Design - Woods. Composed of a Digital Information System, distributed, and an ordered collection of samples. The design of a product, carries with it the choice of material, and the choice of a manufacturing process. Information on materials and manufacturing processes are available with different content, media and interfaces. However, such information is not systematized so that they can be recovered, as the need for the designer, especially on wood. This set of methods is called the Selection of Materials and Manufacturing Processes. It is hoped through this study that the methodologies for SMPF are employed by product designers, architects and engineers in Brazil.

Procedimentos metodológicos em design gráfico voltados a jornais diários impressos: estudos e relatos de experiência

This paper summarizes a research that has been developed from the concern about a company’s strategic planning, once regarding the product development process and its methodological guidelines. Our goal was to check if there is an ideal methodology, peculiar to the graphic design, which could be applied to a printed newspaper condition. And then, we could deduce, according to the design practices in newspapers, its relevance. We did not intend to create a specific graphic design methodology for daily newspapers, nor the analysis of methods, but we wanted to emphasize that the familiarization with acknowledged methods in the field of visual communication, during the process of professional formation, might ease good choices in the work practice on design. The understanding of the gradual introduction of graphic design on printed daily newspapers brings about, thus, not only their visual improvement, but also allows that this kind of journalism (which depends on a graphic interface in order to make their product come true) reconsider the newspaper as a whole.

Charles e Ray Eames: o casamento entre a razão e emoção no design

The rationalism appears as a philosophical current whose mental process and logic and evidenced, with the main characteristic of modern thought the method, the Bauhaus represents for the design the way the industry undressed the ornaments seeking the ideal of form and function. In a current contemporary design the emotional recovery in addition to the functions that an object can have, aesthetic, practical and symbolic, also the emotional identification, making review the methods. This article makes a relation of this context with the brilliantly that the couple Charles and Ray Eames, have created a method quite emotional for the creation of design, starting with the invention of the plywood and then with access to various technologies resulting from post-war, they created a very interesting process of building design combining art technique, producing seats that are ageless, found easily in the contemporary world.

Design e inovação em contexto de ensino-aprendizagem

This paper presents part of the results of a post-doctoral research project which is called "Hypermedia Design involved with the User Experience". The discussion will be undertaken in this article assumes that the use of a hypermedia environment facing the field of Design can facilitate the process of teaching and learning in an undergraduate degree in Design. The theme that guides the paper of the following question: if the education and training in design does not allow access, involvement and knowledge of the technologies in its primary base that practitioners and researchers are forming for the near future? For both this study focuses on the use of a digital environment by reporting of an experiment of using hypermedia digital book "Design, Education and Technology" as a teaching tool in undergraduate courses in design, results and notes on issues involving interactivity and user experience. The methodology has a qualitative bias, developed along the lines of exploratory research in the form of a case study, lectures, and workshops for the dynamic observation, a questionnaire and analysis of results were applied

Seleção de genótipos de soja portadores ou não do gene RR por meio de análise multivariada e desempenho agronômico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)