A Critical Review of Properties of Darunavir and Analytical Methods for Its Determination

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Critical training of mass media documentalists

This study takes the old myth of objectivity in media discourse to one of the most important but unrecognized actors in the process of its construction: the mass media information scientist or documentalist. Accepting the subjective presence of the documentalist in his/her productions, this article opts for the recognition and explicit statement of this role, recommending two actions. First, we suggest that public higher education institutions combine the technical training of mass media documentalists with training in critical thinking skills. Our study analysed the subjects covered in course syllabi to detect the deficiencies to be addressed in meeting this objective. Second, we propose alternative lines of training that can contribute to cross-training of mass media documentalists in those degree programs to ensure that they acquire the needed skills in critical analysis.

The physiology and impact on fertility of the period of proestrus in lactating dairy cows

In cattle, proestrus begins with the initiation of luteolysis and ends with initiation of estrus and the GnRH/LH surge. This period is marked by a dramatic decrease in circulating progesterone (P4) that reaches a nadir by about 36-48 h in cows undergoing natural or prostaglandin F2 alpha (PGF)-induced luteolysis. Inadequate luteolysis is a cause of reduced fertility particularly in timed AI programs with small elevations in circulating P4 reducing fertility. Increasing circulating estradiol (E2) during proestrus is dependent on presence, size, and function of the dominant follicle and this varies during natural proestrus, due to whether animals have two or three follicular waves, and during PGF-induced proestrus, according to stage of the follicular wave at time of PGF treatment. Inadequate circulating E2 can limit fertility and increase pregnancy loss in some specific circumstances such as in cows with low BCS and in cows during heat stress. Thus, studies to optimize the length of proestrus and the concentrations of E2 and P4 during proestrus could produce substantial improvements in fertility and reductions in pregnancy loss.

Assessment of reproductive capacity in females of Smith, 1869 (Brachyura, Portunoidea) during a period of high reproductive activity

The reproductive capacity of the swimming crab Callinectes danae Smith, 1869 was assessed based on the reproductive investment (RI) of ovigerous females and the gonadosomatic index (GI) of non-ovigerous adult females. Crabs were collected in June 2009 with a shrimp fishing boat at Ubatuba (23° 26′S 45° 02′W) São Paulo, Brazil. Overall, 191 adult females were analyzed, of which 108 were ovigerous and 83 non-ovigerous. The size of ovigerous females ranged from 54.5 to 79.8 mm carapace width (CW) and non-ovigerous females ranged from 56.0 to 80.9 mm CW. RI values did not differ among the size classes (ANOVA, p > 0.05), with an overall mean of 15.8%. The same occurred with the Gonadossomatic index for non-ovigerous females, for which the mean value was 11.7%. The regression between the dry weight of the egg mass and the dry weight of the crab (Student’s t, p = 0.25; ttab = 1.66; tcal = 0.66) indicated an isometric relationship for the variables analyzed. The simultaneous occurrence of gonadal maturation and embryonic development in ovigerous females suggests that these crabs may spawn at least twice in the same breeding season and reveals the need for evaluation of the allocation of energy in subsequent spawns.

Assessment of reproductive capacity in females of Callinectes danae Smith, 1869 (Brachyura, Portunoidea) during a period of high reproductive activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A critical comparison of different approaches to sediment-quality assessments in the Santos estuarine system in Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Inverted critical adsorption of polyelectrolytes in confinement

What are the fundamental laws for the adsorption of charged polymers onto oppositely charged surfaces, for convex, planar, and concave geometries? This question is at the heart of surface coating applications, various complex formation phenomena, as well as in the context of cellular and viral biophysics. It has been a long-standing challenge in theoretical polymer physics; for realistic systems the quantitative understanding is however often achievable only by computer simulations. In this study, we present the findings of such extensive Monte-Carlo in silico experiments for polymer-surface adsorption in confined domains. We study the inverted critical adsorption of finite-length polyelectrolytes in three fundamental geometries: planar slit, cylindrical pore, and spherical cavity. The scaling relations extracted from simulations for the critical surface charge density sigma(c)-defining the adsorption-desorption transition-are in excellent agreement with our analytical calculations based on the ground-state analysis of the Edwards equation. In particular, we confirm the magnitude and scaling of sigma(c) for the concave interfaces versus the Debye screening length 1/kappa and the extent of confinement a for these three interfaces for small kappa a values. For large kappa a the critical adsorption condition approaches the known planar limit. The transition between the two regimes takes place when the radius of surface curvature or half of the slit thickness a is of the order of 1/kappa. We also rationalize how sigma(c)(kappa) dependence gets modified for semi-flexible versus flexible chains under external confinement. We examine the implications of the chain length for critical adsorption-the effect often hard to tackle theoretically-putting an emphasis on polymers inside attractive spherical cavities. The applications of our findings to some biological systems are discussed, for instance the adsorption of nucleic acids onto the inner surfaces of cylindrical and spherical viral capsids.

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

Objectives. To compare three different designs for measuring the bond strength between Y-TZP ceramic and a composite material, before and after ceramic surface treatment, evaluating the influence of the size of the adhesive interface for each design.Methods. 'Macro'tensile, microtensile, 'macro'shear, microshear, 'macro'push-out, and micropush-out tests were carried out. Two Y-TZP surface treatments were evaluated: silanization (sil) and tribochemical silica coating (30 mu m silica-modified Al2O3 particles + silanization) (TBS). Failure mode analysis of tested samples was also performed. Results. Both the surface treatment and the size of the bonded interface significantly affected the results (p = 0.00). Regardless of the type of surface treatment, the microtensile and microshear tests had higher values than their equivalent "macro" tests. However, the push-out test showed the highest values for the "macro" test. The tensile tests showed the greatest variability in results. The tribochemical silica coating method significantly increased bond strength for all tests.Significance. Different test designs can change the outcome for Y-TZP/cement interfaces, in terms of mean values and reliability (variability). The 'micro'tests expressed higher bond strengths than their equivalent 'macro'tests, with the exception of the push-out test (macro > micro). (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

A critical review of the properties of fusidic acid and the analytical methods for its determination

Fusidic acid, an antibiotic produced from the Fusidium coccineum fungus, belongs to the class of steroids, but has no corticosteroid effects. It is indicated for the treatment of infections caused by methicillin-resistant Staphylococcus aureus strains. The aim of this study was to search for the properties of fusidic acid published so far in the literature, as well as the methods developed for its determination in biological samples and pharmaceutical formulations. From the findings, we can conclude that fusidic acid has been used for decades and is indicated for the treatment of serious infections caused by Gram-positive microorganisms to this day. Furthermore, it is a hypoallergenic agent, has low toxicity, shows low resistance, and has no cross-resistance with other clinically used antibiotics. The analytical method of high-performance liquid chromatography has been widely used, since it can reduce the cost and time of analysis, making it more viable for routine quality control in the pharmaceutical industry.

A critical review of analytical methods for determination of ertapenem sodium

Antimicrobials have unquestionable importance in the control of many diseases; however the constant concern with evolution of resistant microorganisms is increasing. The ertapenem sodium is a β-lactam antibiotic of the carbapenem class, which it has a broader activity spectrum than most other β-lactam antimicrobials, and is more resistant to the enzyme β-lactamase, which is the main mechanism of resistance of many bacteria. The progress of microbial resistance to existing antibiotics is alarming. Thus we need to preserve antimicrobials that still have activity against these pathogens. In this context, the quality control has a key role to ensure the correct dosage, by contributing preventively to minimize the development of resistant microorganisms. Study of the physicochemical characteristics of the drug and the quantification of the content of active substance are of fundamental importance for the pharmaceutical industry to ensure the quality of the product sold. This work presents a literature survey of existing methods for ertapenem sodium quantification which was performed. Ertapenem sodium can be analyzed by many types of assays; however the HPLC is the most used method. This review will examine the published analytical methods reported for determination of ertapenem sodium, in biological fluids and formulations.

Influence of storage period of pieces in stiffness of pinus elliottii Glulam Beams

This study aimed to investigate the influence of storage time (0, 48 hours) of Pinus elliottii pieces and the tests to obtaining modulus of elasticity (static bending and transversal vibration) in glued laminated timber beams, produced with resorcinol based adhesive and 0.8 MPa compaction pressure. After pieces were properly prepared, part of them was used in immediate three manufacturing glulam beams, tested after adhesive cure, and part stored for 48 hours under a roof with a temperature of 25°C and relative humidity of 60% for subsequent manufacturing and testing three other glulam beams. Results of analysis of variance (ANOVA) revealed that the storage period was significant influence in modulus of elasticity obtained in static bending test (8% reduction from 0 to 48 hours). This not occurred with modulus of elasticity obtained by transversal vibration test (no significant influence). ANOVA results showed equivalence of means in both test procedures. New researches ire needed to better understand the investigated phenomenon, using new wood species, other storage conditions and a great number of samples.