Physicochemical analysis of Ti-Si-B powder aalloys

Titanium alloys of Ti-Si-B system were manufactured by blended elemental powder method using Ti, Si and B powders as starting materials. It was found that uniaxial and isostatic pressing followed by hot pressing at around 1000°C, for 20 minutes, provided good densification of such alloys. The physicochemical studies were performed by means of scanning electron microscopy, X-ray diffraction, atomic force microscopy and microindentation/wear tests. The investigations revealed a multiphase microstructure formed mainly by α-titanium, Ti6Si2B, Ti5Si3, TiB and Ti3Si phases. The phase transformations after pressureless sintering at 1200°C was also studied by X-ray diffraction for the Ti-18Si-6B composition. As stated in some other researches, these intermetallics in the α-titanium matrix provide high wear resistance and hardness, with the best wear rate of 0.2 mm3/N.m and the highest hardness of around 1300 HV. © (2012) Trans Tech Publications, Switzerland.

Functional nanostructured catalysts based on the niobates to the dry methane reforming and ethylene homologation reactions

Catalytic activity and selectivity of niobate-based nanostructured materials were investigated. Dry methane reforming (DMR) and ethylene homologation reaction (EHR) were selected as test reactions. KSr 2Nb5O15, Sr2NaNb5O 15 and NaSr2(NiNb4)O15 δ niobate powders were prepared by the high energy ball milling method and calcined in a reductor atmosphere. N2 adsorption isotherms, X-ray diffraction and infrared spectroscopy characterization was performed. Hydrogen pretreated niobates showed from low to moderate catalytic initial activity in DMR's test, nevertheless the materials were deactivated rapidly and the kinetic parameters associated to deactivation were estimated. Otherwise, non-treated catalysts showed a high initial activity in EHR's test and KSr2Nb 5O15 catalyst requires 24 h to the total deactivation with a high selectivity to form propylene. A reaction mechanism to the propylene formation is discussed. © 2012 Elsevier Ltd. All rights reserved.

Mechanochemical synthesis of yttrium manganite

Yttrium manganite (YMnO3) is a multiferroic material, which means that it exhibits both ferromagnetic and ferroelectric properties, so making it interesting for a variety of technological applications. In this work, single-phase YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 was formed directly from the highly activated constituent oxides, Y 2O3 and Mn2O3, after 60 min of milling time. During prolonged milling, the growth of the particles occurred. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. The X-ray powder-diffraction analysis indicates that the as-prepared samples crystallize with an orthorhombic (Pnma) YMnO3 structure. The morphology and chemical composition of the powder were investigated by SEM and FESEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of the milling time in a manner consistent with the variation in the nanocomposite microstructure. © 2012 Elsevier B.V. All rights reserved.

Association between Pseudonocardia symbionts and Atta leaf-cutting ants suggested by improved isolation methods

Fungus-growing ants associate with multiple symbiotic microbes, including Actinobacteria for production of antibiotics. The best studied of these bacteria are within the genus Pseudonocardia, which in most fungus-growing ants are conspicuously visible on the external cuticle of workers. However, given that fungus-growing ants in the genus Atta do not carry visible Actinobacteria on their cuticle, it is unclear if this genus engages in the symbiosis with Pseudonocardia. Here we explore whether improving culturing techniques can allow for successful isolation of Pseudonocardia from Atta cephalotes leaf-cutting ants. We obtained Pseudonocardia from 9 of 11 isolation method/colony component combinations from all 5 colonies intensively sampled. The most efficient technique was bead-beating workers in phosphate buffer solution, then plating the suspension on carboxymethylcellulose medium. Placing these strains in a fungus-growing ant-associated Pseudonocardia phylogeny revealed that while some strains grouped with clades of Pseudonocardia associated with other genera of fungus-growing ants, a large portion of the isolates fell into two novel phylogenetic clades previously not identified from this ant-microbe symbiosis. Our findings suggest that Pseudonocardia may be associated with Atta fungus-growing ants, potentially internalized, and that localizing the symbiont and exploring its role is necessary to shed further light on the association.

Effects of high temperature plasma immersion ion implantation on wear resistance of Ti-Si-B sintered alloys

Although titanium and its alloys own good mechanical properties and excellent corrosion resistance, these materials present poor tribological properties for specific applications that require wear resistance. In order to produce wear-resistant surfaces, this work is aimed at achieving improvement of wear characteristics in Ti-Si-B alloys by means of high temperature nitrogen plasma immersion ion implantation (PIII). These alloys were produced by powder metallurgy using high energy ball milling and hot pressing. Scanning electron microscopy (SEM) and X-ray diffraction identified the presence of α-titanium, Ti6Si2B, Ti5Si3, TiB and Ti3Si phases. Wear tests were carried out with a ball-on-disk tribometer to evaluate the friction coefficient and wear rate in treated and untreated samples. The worn profiles were measured by visible light microscopy and examined by SEM in order to determine the wear rates and wear mechanisms. Ti-7.5Si-22.5B alloy presented the highest wear resistance amongst the untreated alloys produced in this work. High temperature PIII was effective to reduce the wear rate and friction coefficient of all the Ti-Si-B sintered alloys. © 2013 Elsevier B.V.

Compartmentalization of pro-inflammatory cytokine levels in renal-transplanted pregnant women

Objective: We evaluated whether chronic exposure to immunosuppression in transplant recipients modulate the placental inflammatory cytokine levels associated to gestational tolerance mechanisms. Methods: Serum samples were collected from 12 renal transplanted pregnant under immunosuppressive regimen treatment and 10 healthy women in second/third trimester of gestation. Term placental tissues (decidua and chorionic villi) were also obtained after elective caesarean. Serum IL-1β, IL-6, IL-8, IL-12p70 and TNF-α were measured, as also in placental homogenates, by Cytometric Bead Array (CBA) combined with flow cytometry and, TGF-β and IL-18 were measured by ELISA. Results: Serum levels of IL-6 (p=0.0001) and TNF-α (0.0112) were higher in the 2nd and 3rd trimesters and in decidua the spectrum of increased pro inflammatory cytokines was wider: IL-1β (p=0.0001), IL-6 (p=0.0001), IL-8 (p=0.0001), IL-12p70 (p=0.0001), TGF-β (p=0.0089) and TNF-α (p=0.0002). TGF-β1 was particularly increased in decidual compartment (p=0.001). In the chorionic villous, pro inflammatory profile also were maintained. High IL-1β (p=0.0001), IL-6 (p=0.0001), IL-8 (p=0.0001) and TNF-α (p=0.0001) levels establish a similar pattern to that seem in decidua. Conclusion: Immunosuppressors may impair the immune response, but when associated with pregnancy the cytokine levels seems to shift a proinflammatory profile in placental compartments, which might also impact on the gestational outcomes in transplanted mothers. © 2013 Informa UK Ltd. All rights reserved: reproduction in whole or part not permitted.

Aplicação de redes neurais artificiais na predição de diâmetro e rugosidade durante o processo de furação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimação do diâmetro de furos em processo de furação utilizando sistemas de inteligência artificial: uma análise comparativa entre diferentes técnicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo conformacional de polianfóteros fracos utilizando simulações de Monte Carlo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Glicerol-3-Fosfato oxidase em levedura de panificação

Pós-graduação em Alimentos e Nutrição - FCFAR

Efeito da hidrólise enzimática seguida da moagem em moinho de bolas sobre as características estruturais e físico-químicas do amido de madioquinha-salsa

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização de fibras de milho e sua incorporação em barras de cereais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da modificação ácido-etanólica do amido de mandioca seguida de moagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da moagem em moinho de bolas e do tratamento térmico com baixa umidade sobre as características estruturais e físico-químicas dos amidos de mandioca e mandioquinha-salsa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização físico-química e rendimento da moagem úmida de quatro híbridos de milho

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE