Introdução de Lentinulaedodes (Shiitake) e Pleurotusostreatus (Shimeji) em bagaço de cana termo explodido para diminuição da toxicidade

Ethanol production has gained great prominence in the investment new renewable energy sources and Brazil is among the leaders of production. However, this activity generates large amounts of waste being the largest volume of the sugar cane bagasse. For this reason looking up ways to use this material as burning for energy production and composition of forage in the diet of ruminants, however there are difficulties to use this production for this last one. This paper proposes a microbiological treatment with Lentinula edodes and Pleurotus ostreatus in order to enable the bagasse in ruminant feed composition in order to be used more noble than their burning. After treatment with the fungus, tests were performed for quantifying crude protein by the method of Kjeldhal. It was verified that the protein content in the pure bagasse was 1.0% after fermentation the protein content was 4.2% with L.edodes and 4.9% with P. ostreatus. To evaluate the protein quality of the product fermented by L. edodes and P. ostreatus was applied microbiological method for growth of Enterococcus zimogenes verifying that after fermentation the protein quality was 76 and 27.4% with L. edodes and P.ostreatus, respectively, compared with casein. The quantification of amino acids showed significant improvement of protein with altered amino acid profile with treatments of fungos. About of DQO and BOD were also found considerable improvement besides considerable drop in toxicity as measured by acute toxicity test with Daphinia similis

Aspectos técnicos e ambientais da incorporação de novas tecnologias no setor sucroalcooleiro: produção de hidrogênio e gaseificação do bagaço

The purpose of this work is to study the incorporation of hydrogen production (Case A) and the process of gasification of sugarcane bagasse associated with combined cycle gas turbine and steam turbine (Case B) for Distillery Pioneers process. These technologies can be used to improve the energy supply in the sugarcane mill. Initially the processes for obtaining sugar and ethanol from sugarcane is discussed, with a theoretical introduction to hydrogen, the process of steam reforming and gasification of biomass (bagasse) by inserting a turbine associated with the recovery boiler gas. Subsequently makes up the energy and exergy analysis of the incorporation of the above technologies. In end stage makes it an ecological analysis considering or not the carbon cycle (photosynthesis), to determine the levels of emissions of pollutants, carbon dioxide equivalent, indicators of pollution and ecological efficiencies associated with technological developments proposed. It is concluded that hydrogen production by steam reforming of ethanol and gasification of bagasse are viable alternatives from the point of view of technical and environmental applications in the biofuels industry, contributing to the development of the sector in the country

Aplicação de cinza do bagaço de cana-de-açúcar em latossolo cultivado com cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Aplicações de coquetéis de celulases para a sacarificação enzimática do bagaço de cana-de-açúcar

Pós-graduação em Química - IBILCE

Estudo das características fluidodinâmicas do bagaço de cana de açúcar para aplicações da gaseificação no setor sucroalcooleiro

In this work is studied the fluid dynamic characteristics of sugarcane bagasse for gasification applications and use of syngas in the sugarcane sector. This is an experimental work, which is initially performed the particle size separation of sugarcane bagasse particles, using appropriate equipment. Through the experiment is possible to determine the average diameter of particles pomace typical sugarcane mill. The equipment used for the grading sieve separation assembly consists of several dimensions, arranged vertically and which shows adequate for good separation from the pulp. Later, it makes immediate analysis for the determination of moisture, ash, volatile materials and fixed carbon. The study also determines the gross calorific value and allows analysis of densities of particles of sugar cane bagasse. Also studied the bagasse morphology using electron microscopes, where it was possible to visualize the geometry of the particles of bagasse. The use of Electronic Scanning Microscopy (SEM) provided better understand the morphology and particle size measured by using photography methods. Two methods for determining the sphericity of the particles were also used. The experiments carried out using appropriate standards and specific equations, allowing compare the present results with the values found by several researchers. Subsequently, fluid dynamic simulations were performed for the determination of porosity and minimum fluidization velocity theoretical. It follows that the sphericity and porosity of the bagasse particles influence the minimum fluidization velocity of biomass

Desenvolvimento de um conversor estático PWM para o acionamento de LED’S para iluminação publica

This work deals with the development of a switched-mode power supply circuit based on a Buck topology converter with a Boost Rectifier One-Cycle Control with Power Factor Correction developing, thus, a source of direct current for a module of 50 power LEDs that will be used in a lamp for public street lightning. It is presented, at first, some aspects about the most common technologies used in lamps of public street lightning in Brazil and a comparison with the White LED high power, which is the one that presents itself as the most promising among the existing market. Then it is presented the detailed development of the static converter switched PWM, consisting of a Boost rectifier with power factor correction and methodology of control One-Cycle Control associated with a Buck converter controlled by a PI method that operates as a direct current source . At the end of the simulation results of the circuit through the PSIM software are presented to verify the design behavior

Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar

Pós-graduação em Engenharia Mecânica - FEG

Caracterização da cinza de bagaço de cana-de-açúcar e aplicação no solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Aplicação de cinza de bagaço de cana-de-açúcar nos atributos químicos e biológicos do solo

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Concreto com adição de cinza de bagaço de cana-de-açúcar

Pós-graduação em Engenharia Civil - FEIS

Painéis de Medium Density Fiberboard fabricados com bagaço de cana-de-açúcar e madeira de reflorestamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analise técnica, econômica e ecológica da incorporação de sistemas de gaseificação de bagaço de cana-de-açúcar no setor sucroalcooleiro: uso de ciclos combinados para o aumento da oferta de eletricidade

Pós-graduação em Engenharia Mecânica - FEG

Pré-tratamento do bagaço de cana-de-açúcar, hidrólise e sua caracterização química e estrutural, visando a produção de etanol de segunda geração

Pós-graduação em Biotecnologia - IQ

O ensino da recepção estético-lierária e a formação humana

In this article are defended the possibility and the necessity of the teaching of the reception of art works in school education. Firstly, some relations between art and the development of both the human species and the individual are analysed in Georg Lukács and Lev Vygotsky’s works. In order to put in question the old assumption that opposes education and instruction, the discussion made by Gramsci on the grammatical teaching of Latin and Greek in the traditional school education is explored. In the article is concluded its path analysing the intentional and systematic formation of the reception of art works provided by school education based on Aleksei N. Leontiev’s works on the appropriation process of culture by the individual.