196 resultados para Visual C 6.0


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study aimed to evaluate laser fluorescence (LF) for monitoring the initial stage of subsurface de- and remineralization (<150 mu m depth). Ninety-six sound blocks of bovine enamel, selected according to surface hardness (SH) and LF were used in two experimental studies, in vitro and in situ. In vitro, blocks were exposed to a demineralizing solution, then remineralized by pH cycling for 6 days. In situ, 10 volunteers wore acrylic palatal appliances, each containing 4 dental enamel blocks that were demineralized for 14 days by exposure to 20% sucrose solution. Following this treatment, blocks were submitted to remineralization for 1 week with fluoride dentifrice (1,100 mu g F/g). In both experiments, SH and LH were measured after demineralization and after remineralization. Further, enamel blocks were selected after the demineralization/remineralization steps for measurement of cross-sectional hardness and integrated loss of subsurface hardness (Delta KHN). SH and Delta KHN showed significant differences among the phases in each study. LF values for sound, demineralized and remineralized enamel were: 5.2 +/- 1.1, 8.1 +/- 1.2 and 5.6 +/- 0.8, respectively, in the in vitro study, and 5.3 +/- 0.3, 16.5 +/- 4.7 and 6.5 +/- 2.5, respectively, in the in situ study, values for demineralized enamel being significantly higher than for sound and remineralized enamel in both studies. However, LF was correlated with Delta KHN only in situ. LF was capable of monitoring de- and remineralization in early lesions in situ, when bacteria are presumably present in the caries lesion body, but is not correlated with mineral changes in bacteria-free systems. Copyright (C) 2009 S. Karger AG, Basel

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: the aim of the present study was to compare the effects of Er:YAG and diode laser treatments of the root surface on intrapulpal temperature after scaling and root planing with hand instruments.Methods: Fifteen extracted single-rooted teeth were scaled and root planed with hand instruments. The teeth were divided into 3 groups of 5 each and irradiated on their buccal and lingual surfaces: group A: Er:YAG laser, 2.94 mum/100 mJ/10 Hz/ 30 seconds; group B: diode laser, 810 nm/1.0 W/0.05 ms/30 seconds; group C: diode laser, 810 nm/1.4 W/0.05 ms/30 seconds. The temperature was monitored by means of a type T thermocouple (copper-constantan) positioned in the pulp chamber to assess pulpal temperature during and before irradiation. Afterwards, the specimens were longitudinally sectioned, and the buccal and lingual surfaces of each root were analyzed by scanning electron microscopy.Results: In the Er:YAG laser group, the thermal analysis revealed an average temperature of -2.2 +/- 1.5degreesC, while in the diode laser groups, temperatures were 1.6 +/- 0.8degreesC at 1.0 W and 3.3 +/- 1.0degreesC at 1.4 W. Electronic micrographs revealed that there were no significant morphological changes, such as charring, melting, or fusion, in any group, although the specimens were found to be more irregular in the Er:YAG laser group.Conclusions: the application of Er:YAG and diode lasers at the utilized parameters did not induce high pulpal temperatures. Root surface irregularities were more pronounced after irradiation with an Er:YAG laser than with a diode laser.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

It has been shown that central or peripheral injections of the peptide relaxin induces water intake, not sodium intake in rats. Important inhibitory mechanisms involving serotonin and other neurotransmitters in the control of water and NaCl intake have been demonstrated in the lateral parabrachial nucleus (LPBN). In the present Study, we investigated the effects of bilateral injections of methysergide (serotonergic receptor antagonist) into the LPBN on intracerebroventricular (i.c.v.) relaxin-induced water and NaCl intake in rats. Additionally, the effect of the blockade of central angiotensin AT(1) receptors with i.c.v. losartan on relaxin-induced water and NaCl intake in rats treated with methysergide into the LPBN was also investigated. Male Holtzman rats with cannulas implanted into the lateral ventricle (LV) and bilaterally in the LPBN were used. Intracerebroventricular injections of relaxin (500 ng/l mul) induced water intake (5.1+/-0.7 ml/120 min), but not significant 1.8% NaCl intake (0.5+/-0.4 ml/120 min). Bilateral injections of methysergide (4 mug/0.2 mul) into the LPBN strongly stimulated relaxin-induced 1.8% NaCl intake (34.5+/-10.9 ml/120 min) and slightly increased water intake (10.5+/-4.9 ml/120 min). The pretreatment with i.c.v. losartan (100 mug/l mul) abolished the effects of i.c.v. relaxin combined with LPBN methysergide on 1.8% NaCI intake (0.5+/-0.4 ml/120 min). Losartan (100 mug/l mul) also abolished relaxin-induced water intake in rats injected with methysergide into the LPBN (1.6+/-0.8 ml/120 min) or not (0.5+/-0.3 ml/120 min). Losartan (50 mug/l mul) partially reduced the effects of relaxin. The results show that central relaxin interacting with central angiotensinergic mechanisms induces NaCl intake after the blockade of LPBN serotonergic mechanisms. (C) 2004 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective: Mechanical properties of the acrylic resins used for denture fabrication may be influenced by water and temperature. Thus, the aim of this study was to evaluate the effect of thermocycling on the flexural and impact strength of a high-impact (Lucitone 199) and a urethane-based denture material (Eclipse).Materials and methods: Flexural strength (64 x 10 x 3.3 mm) and impact strength (60 x 6 x 4 mm) specimens were made following the manufacturers' instructions and assigned to two groups (n = 10): control (C) - not thermocycled - and T - thermocycled (5000 cycles between 5 and 55 degrees C). Specimens were submitted to three-point bending and Charpy impact tests.Results: Flexural strength (MPa) and impact strength (kJ/m(2)) data were analysed with two-way ANOVA (p = 0.05). The flexural strength of material Eclipse (C, 136.5; T, 130.7) was significantly higher than that of resin Lucitone 550 (C, 99.4; T, 90.1). Material Eclipse exhibited significantly higher impact strength (C, 6.9; T, 5.3) than the resin Lucitone 550 (C, 3.5; T, 3.0). For both materials, a significant decrease in flexural and impact strengths was observed when the specimens were thermocycled.Conclusion: Flexural and impact strengths were higher for Eclipse than for Lucitone 550, in both groups. Thermocycling decreased the flexural and impact strengths of Eclipse and Lucitone 550.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective: The aim of this in vitro study was to evaluate the bond strength of different root canal sealers to dentin. Material and Methods: Forty extracted single-rooted human teeth were examined and the coronal and middle thirds of the canals were prepared with a 1.50 mm post drill (FibreKor Post System, Pentron). The teeth were allocated in two experimental groups, irrigated with 2.5% NaOCl+17% EDTA or saline solution (control group) and instrumented using Race rotary files (FKG) to a size #40 at the working length. Then, the groups were divided into four subgroups and filled with Epiphany sealer (Group 1), EndoREZ (Group 2), AH26 (Group 3) and Grossman's Sealer (Group 4). After 2 weeks of storage in 100% humidity at 37 degrees C, all teeth were sectioned transversally into 2-mm-thick discs. Push-out tests were performed at a cross-head speed of 1 mm/min using a universal testing machine. The maximum load at failure was recorded and expressed in MPa. Results: Means (+/- SD) in root canals irrigated with 2.5% NaOCl and 17% EDTA were: G1 (21.6 +/- 6.0), G2 (15.2 +/- 3.7), G3 (14.6 +/- 4.5) and G4 (11.7 +/- 4.1). Two-way ANOVA and Tukey's test showed the highest bond strength for the Epiphany's group (p < 0.01) when compared to the other tested sealers. Saline solution decreased the values of bond-strength (p < 0.05) for all sealers. Conclusion: Epiphany sealer presented higher bond strength values to dentin in both irrigating protocols, and the use of 2.5% NaOCl and 17% EDTA increased the bond strength values for all sealers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Estrous behavior and the estrus-to-ovulation interval are essential for estimating the best time to artificially inseminate cattle. Because these parameters are not well characterized in the Nelore breed (Bos indicus), the main purpose of the this study was to determine the estrus-to-ovulation interval in Nelore heifers and cows with natural estrus or with estrus induced by treatments with PGF2 alpha or norgestomet and estradiol valerate (NEV). The cows and heifers were observed continuously (24 h a day) to determine the onset of estrus and to study estrous behavior in the cows. Ten hours after the start of estrus the ovaries were scanned every 2 h by ultrasonography to monitor the dominant follicle until ovulation. Blood samples were collected periodically to determine progesterone levels by RIA. Administration of PGF2 alpha (2 injections, 11 days apart) did not induce estrus in most Nelore females in spite of the presence of functional CL, indicated by progesterone concentrations above 6.0 ng/ml in 25 of 28 animals. Treatment with NEV induced high sexual receptivity in cows (10/11), but only 66% ovulated. Cows with natural or induced estrus exhibited behavioral estrus of 10.9 +/- 1.4 h, and ovulation occurred 26.6 +/- 0.44 h (n = 26) after the onset of estrus. In most of the cows (53.8%) estrus began at night (between 1801 and 600 h), and 34.6% it started and finished during the night. It is concluded that in Nelore females ovulation occurs approximately 26 h after the onset of estrus. Additionally, estrous behavior is shorter than in European breeds, and there is a high incidence of estrus at night, which makes it difficult to detect and, consequently, impairs Al in Nelore cattle. The observation that a high percentage of Nelore females with an active CL did not respond to usual dosages of PGF2 alpha warrants further investigation. (C) 1998 by Elsevier B.V.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to evaluate protocols for synchronizing ovulation in beef cattle. In Experiment 1, Nelore cows (Bos indicus) at random stages of the estrous cycle were assigned to 1 of the following treatments: Group GP controls (nonlactating, n=7) received GnRH agonist (Day 0) and PGF2 alpha (Day 7); while Groups GPG (nonlactating, n=8) and GPG-L (lactating, n=9) cows were given GnRH (Day 0), PGF2a (Day 7) and GnRH again (Day 8, 30 h after PGF2 alpha). A new follicular wave was observed 1.79+/-0.34 d after GnRH in 19/24 cows. After PGF2a, ovulation occurred in 19/24 cows (6/7 GP, 6/8 GPG, 7/9 GPG-L). Most cows (83.3%) exhibited a dominant follicle just before PGF2a, and 17/19 ovulatory follicles were from a new follicular wave. There was a more precise synchrony of ovulation (within 12 h) in cows that received a second dose of GnRH (GPG and GPG-L) than controls (GP, ovulation within 48 h; P<0.01). In Experiment 2, lactating Nelore cows with a visible corpus luteum (CL) by ultrasonography were allocated to 2 treatments: Group GPE (n=10) received GnRH agonist (Day 0), PGF2a (Day 7) and estradiol benzoate (EB; Day 8, 24 h after PGF2 alpha); while Group EPE (n=11), received EB (Day 0), PGF2a (Day 9) and EB (Day 10, 24 h after PGF2a). Emergence of a new follicular wave was observed 1.6+/-0.31 d after GnRH (Group GPE). After EB injection (Day 8) ovulation was observed at 45.38+/-2.03 h in 7/10 cows within 12 h. In Group EPE the emergence of a new follicular wave was observed later (4.36+/-0.31 d) than in Group GEP (1.6+/-0.31 d; P<0.001). After the second EB injection (Day 10) ovulation was observed at 44.16+/-2.21 h within 12 (7/11 cows) or 18 h (8/11 cows). All 3 treatments were effective in synchronizing ovulation in beef cows. However, GPE and, particularly EPE treatments offer a promising alternative to the GPG protocol in timed artificial insemination of beef cattle, due to the low cost of EB compared with GnRH agonists. (C) 2000 by Elsevier B.V.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The lady beetle Coleomegilla maculata (De Geer) is a natural enemy of several insect pests and feeds on pollen and nectar to survive periods when prey is scarce. The effect of the feeding interval on the development, survival, fecundity, and longevity of C. maculata was determined. Newly hatched larvae of C. maculata were reared individually and fed with eggs of the Mediterranean flour moth Anagasta kuehniella (Zeller) at intervals of one, two, and three days under controlled conditions (23 ± 1ºC; 60 ± 10% RH; 12 h phtophase). The duration of larval instars and the total larval stage was prolonged as the feeding interval increased. The larval period lasted on average 9.2 ± 0.19 days when the larvae were fed daily with prey, and 14.6 ± 0.48 days when food was offered at three-day intervals. There was an inverse relationship between food intervals, survival, and weight of larvae and adults of the coccinellid. Survival rate of larvae fed daily was 76.8%, while the rate was 50.0% and 23.4% for larvae fed every two and three days, respectively. Coleomegilla maculata showed fecundity of 781.1 ± 149.02, 563.4 ± 80.81 and 109.0 ± 103.0 eggs when fed daily and at intervals of two and three days, respectively.