Perfilhamento do trigo em função da aplicação de regulador vegetal

Tillers survival and yield potential are genetically determined and strongly influenced by environmental conditions during the emission and establishment stage. This experiment was carried in order to study effects of application of growth regulator (Ax+GA+CK) on tiller survival and yield potential of wheat. The experiment was carried out from March to July 2010. A 2 × 2 factorial randomized block design with five replications was used. Two wheat cultivars (IAC 370 and IAC 375) and application or not of Ax+GA+CK at the beginning of tillering stage were evaluated. Tiller emission were evaluated at five ages (19, 26, 33, 40 e 47 days after emergence) and yield components were determined by each individual structure evaluation, comparing to the main stem. Growth regulator application improved the tiller survival when emitted in the first week after application. Tiller yield potential decreased in late emission periods of tillers in both cultivars tested, influenced by different traits of each cultivar. IAC 370 showed higher tiller emission, however, the number of viable tillers were higher for the IAC 375.

Atmospheric plasma treatment of carbon fibers for enhancement of their adhesion properties

Plasma processing of carbon fibers (CFs) is aimed to provide better contact and adhesion between individual plies without decrease in the CF mechanical resistance. This paper deals with surface modification of CFs by an atmospheric pressure dielectric barrier discharge (DBD) for enhancing the adhesion between the CF and the polymeric matrix. The scanning electron microscopy of the treated samples revealed many small particles distributed over entire surface of the fiber. These particles are product of the fiber surface etching during the DBD treatment that removes the epoxy layer covering as-received samples. The alteration of the CF surface morphology was also confirmed by the Atomic force microscopy (AFM), which indicated that the CF roughness increased as a result of the plasma treatment. The analysis of the surface chemical composition provided by X-ray photoelectron spectroscopy showed that oxygen and nitrogen atoms are incorporated onto the surface. The polar oxygen groups formed on the surface lead to the increasing of the CF surface energy. The results of interlaminar shear strength test (short beam) of CFs/polypropylene composites demonstrated a greater shear resistance of the composites made with CFs treated by DBD than the one with untreated fibers. Both the increase in surface roughness and the surface oxidation contribute for the enhancement of CF adhesion properties. © 2012 IEEE.

Dielectric behavior of epoxy/BaTiO3 composites using nanostructured ceramic fibers obtained by electrospinning

Composite materials made of epoxy resin and barium titanate (BT) electrospun nanostructured fibers were prepared. BT fibers were synthesized from a sol based on barium acetate, titanium isopropoxide, and poly(vinyl pyrrolidone). The fibers were heat-treated at different temperatures and characterized by X-ray diffraction, scanning electron microscopy (SEM), and Raman spectroscopy. Mats of BT fibers heat-treated at 800 C were embedded in epoxy resin into suitable molds. The composites were characterized by SEM, and dielectric measurements were performed by means of dielectric spectroscopy. The dielectric permittivity and dielectric modulus of epoxy resin/BT-fiber composites were measured for two types of samples: with the electrodes parallel and perpendicular to the BT fiber layers. Interestingly, composite samples with electrodes perpendicular to the fiber layers and a BT content as low as 2 vol % led to dielectric permittivities three times higher than that of pure epoxy resin. © 2013 American Chemical Society.

Characterization of high density polyethylene (HDPE) reinforced with banana peel fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications

In this research report, a sintering process of porous ceramic materials based on Al2O3 was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, the precursor solution and cotton were annealed at temperatures in the range of 100-1600°C using scanning electron microscopy (SEM) and thermogravimetric (TG) analysis to obtain a porous body formation and disposal process containing organic fibers and precursor solution. In a structure consisting of open pores and interconnected nanometric grains, despite the low porosity of around 40% (calculated geometrically), nitrogen physisorption determined a specific surface area of 14m2/g, which shows much sintering of porous bodies. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analytical methods revealed a predominant amount of α-Al2O3 in the sintered samples. Thermal properties of the sintered Al2O3 fibers were obtained by using the Laser Flash which resulted in the lower thermal conductivity obtained by α-Al2O3 and therefore improved its potential use as an insulating material. © 2012 Elsevier Ltd.

Study of the glass transition temperature of as-s glasses for the fabrication of chalcogenide optical fibers

Values of glass transition temperature (Tg) and of linear expansion coefficient (α) for Asx S100-x glasses were measured in the range of concentrations 35 × 42. Because of the importance of the glass formation region 35 × 42 for the optical fibers elaboration, special attention was made on high-pure Asx S100-x glasses. For the glass in the range of 35 × 38, we measure Tg with the interval of x equal to 1 at.% of arsenic. We also measured the Tg values with the interval of x equal to 0.5 at.% of As. We obtained nonlinear behavior of Tg, reflecting the change in molecular composition of As-S glass in the glass composition range studied. The control of such parameters is important to produce optical fibers with specific numerical aperture. © 2013 The American Ceramic Society and Wiley Periodicals, Inc.

Lead-germanate glasses and fibers: A practical alternative to tellurite for nonlinear fiber applications

We report on the fabrication of novel lead-germanate glasses and fibers. We have characterized these glasses in terms of their thermal properties, Raman spectra and refractive indices (both linear and nonlinear) and present them as viable alternatives to tellurite glasses for applications requiring highly nonlinear optical fibers. © 2013 Optical Society of America.

Alterações dos atributos químicos do solo e resposta da soja à cobertura vegetal e à calagem superficial na implantação do sistema de semeadura direta

Pós-graduação em Agronomia (Agricultura) - FCA

Utilização de índices de vegetação para estimativa da proteção do solo pela cobertura vegetal: uma contribuição para o uso da equação universal das perdas de solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

SIG e sensoriamento remoto aplicado ao estudo dos processos de inundação e mapeamento da cobertura vegetal na planície fluvial do alto Rio Paraná

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da disponibilidade sazonal e da composição química de itens alimentares no consumo do macaco-prego

Pós-graduação em Biologia Animal - IBILCE

Chuva de sementes em uma área em processo de restauração vegetal em Santa Cruz das Palmeiras (SP)

Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC

Prospecção de enzimas de degradação de materials vegetal em fungos endofíticos

Pós-graduação em Biotecnologia - IQ

Frutos, sementes e plântulas de três espécies de Mimosa Linnaeus(Fabaceae: Mimosoideae): aspectos morfoanatômicos e considerações ecológico-filogenéticas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Atributos químicos e biológicos de solos sob diferentes ecossistemas e adicionados de material vegetal de soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)