Characterization of natural rubber/gold nanoparticles SERS-active substrate

Natural rubber/gold nanoparticles membranes (NR/Au) were studied by ultrasensitive detection and chemical analysis through surface-enhanced Raman scattering and surface-enhanced resonance Raman scattering in our previous work (Cabrera et al., J. Raman Spectrosc. 2012, 43, 474). This article describes the studies of thermal stability and mechanical properties of SERS-active substrate sensors. The composites were prepared using NR membranes obtained by casting the latex solution as an active support (reducing/establishing agents) for the incorporation of colloidal gold nanoparticles (AuNPs). The nanoparticles were synthesized by in situ reduction at different times. The characterization of these sensors was carried out by thermogravimetry, differential scanning calorimetry, scanning electron microscopy (SEM) microscopy, and tensile tests. It is suggested an influence of nanoparticles reduction time on the thermal degradation of NR. There is an increase in thermal stability without changing the chemical properties of the polymer. For the mechanical properties, the tensile rupture was enhanced with the increase in the amount of nanoparticles incorporated in the material. © 2013 Wiley Periodicals, Inc.

Green synthesis of gold nanoparticles with self-sustained natural rubber membranes

Green chemistry is an innovative way to approach the synthesis of metallic nanostructures employing eco-friendly substances (natural compounds) acting as reducing agents. Usually, slow kinetics are expected due to, use of microbiological materials. In this report we study composites of natural rubber (NR) membranes fabricated using latex from Hevea brasiliensis trees (RRIM 600) that works as reducing agent for the synthesis of gold nanoparticles. A straight and clean method is presented, to produce gold nanoparticles (AuNP) in a flexible substrate or in solution, without the use of chemical reducing reagents, and at the same time providing good size's homogeneity, reproducibility, and stability of the composites. Copyright © 2013 Flávio C. Cabrera et al.

A integração agricultura-indústria: uma análise da cadeia agroindustrial da borracha natural da microrregião geográfica de São José do Rio Preto-SP

Pós-graduação em Geografia - FCT

Reaproveitamento de pneus inservíveis: determinação em laboratório das características do asfalto modificado SBS comparadas às do asfalto com pó de borracha

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparação e caracterização de compósitos condutores obtidos a partir da borracha natural com raspa de couro e negro de fumo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle de Aedes aegypti: período residual de temefós na água em recipientes de plástico, vidro e borracha, ação larvicida residual em recipientes de borracha e segurança das condições de trabalho na nebulização de malathion

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Impact of the timing and duration of weed control on the establishment of a rubber tree plantation

A produção da seringueira é reduzida pelas plantas daninhas que competem por recursos ambientais; portanto, a época e duração do controle de plantas daninhas influencia a interferência das plantas daninhas. Os objetivos deste estudo foram: avaliar o crescimento de plantas de seringueira (Hevea brasiliensis), determinar o período crítico para controle das plantas daninhas e avaliar a recuperação do crescimento das seringueiras que conviveram com plantas daninhas por diferentes períodos de tempo após o plantio. Dois grupos de tratamentos foram estabelecidos em condições de campo, no primeiro ano de investigação: um grupo conteve períodos crescentes de infestação de plantas daninhas, enquanto o outro conteve períodos crescentes de controle das plantas daninhas, também incluindo uma testemunha livre de plantas daninhas e uma testemunha com infestação total de plantas daninhas. No segundo ano da investigação, as plantas daninhas foram totalmente controladas. Urochloa decumbens foi a planta daninha dominante (mais de 90% de cobertura). O crescimento da cultura foi grandemente reduzido devido à interferência de plantas daninhas. A altura de plantas decresceu mais rapidamente que qualquer outra característica. Altura de planta, massa seca de folhas e área foliar decresceram em 99%, 97% e 96%, respectivamente, e foram as características mais reduzidas. A altura de plantas também se recuperou mais rapidamente que qualquer outra característica quando o período de controle das plantas daninhas foi entendido. Contudo, a massa seca do caule aumentou em 750%, fazendo desta a característica mais recuperada. O período crítico para o controle de plantas daninhas foi entre 4 e 9½ meses após o plantio, no primeiro ano; contudo, as seringueiras mostraram expressiva recuperação do crescimento quando as plantas daninhas foram controladas ao longo do segundo ano.

Energetic efficiency of an agricultural tractor in function of tire inflation pressure

The tire inflation pressure, among other factors, determines the efficiency in which a tractor can exert traction. It was studied the effect of using two tire inflation pressures, 110.4 kPa in the front and rear wheels, 124.2 kPa in the front wheel and 138 kPa in the rear wheels, the energetic efficiency of an agricultural tractor of 147 kW of engine power, in the displacement speed of 6.0 km.h-1, on track with firm surface, with the tractor engine speed of 2000 rpm. For each condition of the tire pressure, the tested tractor was subjected to constant forces in the drawbar of 45 kN and 50 kN, covering 30 meters. It was used a randomized complete block with a 2x2 factorial arrangement (tire pressure and drawbar power) with four replications, totaling 16 experimental units. Data were subjected to analysis of variance, using the Tukey test at 5% probability for comparison averages. The lowest hourly and specific fuel consumption, the lowest slippage of the wheelsets and the highest efficiency in the drawbar was obtained with the tire inflation pressure of 110.4 kPa in the front and rear tires of the tractor, highlighting that lower pressures improve energetic and operational performance of the tractor.

Kinetic role of a histidine residue in the T1 copper site of the laccase from Rigidoporus lignosus

Laccases (benzendiol:oxygen oxidoreductases; EC 1.10.3.2) catalyze the oxidation of a broad range of substrates, such as polyphenols, dyes and pollutants, and thus these enzymes are widely applied in industrial, biotechnological and environmental fields. In order to improve their biotechnological applications, a deep knowledge of structural factors involved in controlling their activity, in various experimental conditions and on different substrates, is required. In the present study, a laccase from the mushroom Rigidoporus lignosus was kinetically characterized. In particular, the stability, the effects of pH, ionic strength and fluoride ion concentration on the kinetic parameters were investigated, using three di-hydroxy-benzene isomers (1,2-dihydroxy-benzene, 1,3-dihydroxy-benzene and 1,4-dihydroxy-benzene) as substrates. The catalytic constant values of the laccase showed a bell-shaped pH profile, with the same optimum pH and pK(a) values for all tested substrates. This behavior appears to be due to the presence of an ionizable residue in the enzyme active site. To identify this residue, the enzyme was derivatized with diethylpyrocarbonate to modify accessible histidine residues, which, according to structural data, are present in the active site of this enzyme. The kinetic behavior of the derivatized laccase was compared with that of the native enzyme and the derivatized residues were identified by mass spectrometry. Mass spectrometry and kinetic results suggest the main role of His-457 in the control of the catalytic activity of laccase from R. lignosus. (C) 2013 Elsevier B.V. All rights reserved.

Community structure of mites (Arachnida: Acari) in six rubber tree clones

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Performance of different rubber tree clones against South American leaf blight (Microcyclus ulei)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Thermal Characteristics of Lignin Residue from Industrial Processes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Characterization of natural rubber membranes using scaling laws analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Segmentation of Scanning Electron Microscopy Images From Natural Rubber Samples With Gold Nanoparticles Using Starlet Wavelets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biocompatibility studies of natural rubber latex from different tree clones and collection methods

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)