287 resultados para Temperatura efectiva equivalente


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The air temperature is a climatic element of interest for several agricultural related studies. Hence, daily air temperature from two locations in Brazil (Botucatu and Petrolina, with different climate classification), hourly recorded from January 2004 to December 2005, were analysed to verify if 24 h long air temperature variation can be predicted with 6 h interval records. Three data set were selected, with different first time record of air temperature, and analyses performed using geoestatistics to confirm the temporal dependency of records. Then, ordinary krigging was used to model air temperature variation within 1 h interval, and spherical model presented the best approach, with range of 11.6 h for Botucatu and 12.7 for Petrolina. For both locations, the time of air temperature recording was the most importnat factor on accuracy of estimation of air temperature variation. Records at 2, 8, 14 and 20 h and at 4, 10, 16 and 22 h presented the best approaches, but for records at 9, 15 and 21 h, the approach was worst.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The biology of Scymnus (Pullus) argentinicus Weise on Schizaphis graminum at the temperatures 20, 25 and 30°C was studied. The temperatures of 25 and 30°C were favorable to S. (Pullus) argentinicus development. The average of the incubation period was 3.24 days and the larval development was 8.43 days at 25°C. The duration of the instars and pre-pupal and pupal periods was significantly shorter at 25 and 30°C. The percentage of emerging adults was higher at 30°C (98%) while at 20°C this percentual was 82%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Jersey cows has been used in warm climates because they have better performance in dairy production. Generally milk production is reduced in warm climates due to the consequent reduction in feed intake because of the heat stress. When the heat stress occurs there is an increase in the body temperature, however it is not known if the skin temperature indicates a thermal discomfort or if it influences milk yield. The objective of this research was to verify if there was a correlation between skin temperature and milk yield using two treatments. Treatment (A) where the cows stayed for 30 minutes before the milking period, in a room with a shower and a fan; and treatment (B) where the cows did not had access to any cooling device (control). After milking the skin temperature were recorded in the places: forehead, back, leg and teats. Data were statistically analyzed and, even though in treatment (A) the skin temperature were reduced it was not found correlation between skin temperature and milk yield.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work was developed an alternative methodology to separation of aquatic organic matter (AOM) present in natural river waters. The process is based in temperature decreasing of the aqueous sample under controlled conditions that provoke the freezing of the sample and separation of the dark extract, not frozen and rich in organic matter. The results showed that speed of temperature decreasing exerts strongly influence in relative recovery of organic carbon, enrichment and time separation of the organic matter present in water samples. Elemental composition, infrared spectra and thermal analysis results showed that the alternative methodology is less aggressive possible in the attempt of maintaining the integrity of the sample.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effect of protein or energy restriction during the second week post-hatching on body weight gain and femur development of broiler chickens reared at different environmental temperatures (18°C, 25°C and 33°C) was studied. From 1 to 7 days of age and after a restriction period broilers were fed on a control diet with 2850 kcal ME/kg and 20% crude protein. From 8 to 14 days of age, two groups of broilers were fed on restricted energy and protein diets with 2565kcal ME/kg and 20% of crude protein or 2850kcal ME/kg and 15% of crude protein, respectively. At 14, 21, 28, 35 and 42 days, the bones were weighed and the length and width of bones measured. The protein restriction reduced the body weight gain and the diameter of bone at second week of life. After 21 days of age no differences between treatments for these traits were observed. The body weight gain and femur growth were not affected by energy restriction. The high temperature (33°C) reduced weight gain and femur diameter from 21 to 42 days of age, and femur length at 42 days of age. The protein restriction at second week or the high environmental temperature after 21 st day of life decreased body weight gain and femur growth of broiler chickens.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sebastiania commersoniana (Euphorbiaceae) is a tree species of riparian forests in Brazil. Seeds of this species released from mature fruits have heteromorphy in coat colour: dark (dark-brown to black), striated (dark with light-grey stria) and clear (light-grey to whitish). In this work two experiments were carried out in order to study the effect of temperature on seed germination in interaction with coat colour. Germination final percentage and speed index were evaluated. In the first experiment seeds of the three colours were submitted to constant (30°C) and alternating (20-35°C) temperatures. For all the seed colours, best results were obtained at alternating temperature. Physiological quality of striated seeds was greater than those clear seeds and dark seeds were intermediate. In the second experiment striated and clear seeds were submitted to three amplitudes of alternating temperature: 5°C (20-25°C and 25-30°C), 10°C (20-30°C and 25-35°C) and 15°C (20-35°C). Both germination percentage and speed were higher in striated seeds and for the two seed colours, best results were obtained at 20-30°C and 20-35°C. These temperatures are recommended for the germination test.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Thirty-six castrated males and females Landrace x Large-White pigs (74 to 149 days of age) were randomly allotted to two environmental conditions: high temperature in a climatic chamber (HT; 22.2 to 32.8 °C) and comfort temperature in a conventional shed (CT; 17.6 to 26.6 °C), with night-and-day variations. Blood samples were weekly collected from animals of both HT and CT conditions for determination of serum cortisol levels. Cortisol levels of both sexes were not different, and there was no interaction with environmental temperature. Pigs of HT showed significantly higher average cortisol level (P<0.01) than the CT ones (7.06 and 4.82 mg/dL, respectively). Increasing in serum cortisol was continuous and linear (P<0.05) during the experimental period, suggesting the cortisol as a possible indicator of the heat stress in growing-finishing pigs.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

New classes of martensitic stainless steels, with low carbon levels, have been developed aiming to meet the needs of the petroleum industry segment. However, their use has been restricted due to the fact it is a recent development and many of its properties are still under investigation. This work determines the values of initial and final temperatures for the austenitic transformation and the initial and final temperatures of martensitic formation for alloy 13Cr2Ni0,1C, by means of dilatometric tests under continuous cooling. Based on these results the optimized conditions for quench and temper heat treatments were obtained. The microstructural characterization of the alloys under coarse fusion condition was carried out by optical microscopy and the presence of delta-ferrite in the martensitic matrix was observed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the Morrinhos region, Goiás state, Brazil, the rocks of the Araxá Group have mineral assemblages related to the metamorphic peak which occurred in this region and is typical of the amphibolite facies (kyanite zone). These rocks are associated with the initial stage of the main ductile deformation that occurred in this area. Thermobarometric calculations, including the associations, garnet + plagioclase + biotite + muscovite; garnet + plagioclase +biotite + muscovite + kyanite; garnet + plagioclase + biotite + muscovite + amphibole, with quartz in excess, indicate that the metamorphic peak occurred at temperatures of approximately 610°C and pressures in the order of 10 kbar. The P-T path is probably clockwise and is in agreement with the tectonic conditions observed in collisional settings.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this work was to evaluate apples covered with chitosan during storage at ambient temperature. 'Royal Gala' apples were covered with chitosan (MRQ), immersed in acetic acid solution (MB) or did not receive any treatment (MC) and subsequently analyzed physicochemical, sensorial andinstrumentally, as well as for rotten occurrence, at zero, 7, 14, 21, 28, 35, 42 and 46 days of storage. The ratio, pH and reducing sugar contents increased while total titratable acidity, total sugars, total solids and firmness were reduced during storage. Was observed a drastically reduction of ascorbic acid and slight increase on soluble solids, except in the apples that were not pretreated (MC). Luminosity and chromaticity ratio values improved with time, with higher intensity in MRQ. Rotten occurrence was not expressive. The acceptance of appearance, color, global impression, aroma and flavor decreased with time, and appearance and texture were considered the most important sensory attributes for apples. The use of chitosan delayed ripening, reduced losses in firmness and presented a more intense bright, extending shelf life period up to seven days.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The longtailed mealybug Pseudococcus longispinus (Targioni Tozzetti, 1867) (Hemiptera: Pseudococcidae) has been reported attacking coffee crops causing fruit fall in the State of Minas Gerais, Brazil. The knowledge of the population dynamic of this pest is then necessary to implement control measures. Its development was studied at temperatures of 15, 20, 25, 30 and 35°C, determining the thermal requirements. The insects were confined inside a Petri dish containing a foliar disc of 4 cm diameter of Coffea arabica L., cultivar 'Acaiá Cerrado'. The temperature affected the P. longispinus development and survival. Few insects survived at temperatures of 15 and 30°C, and 100% of mortality was obtained at 35°C. The duration of the nymphal stage was reduced when the temperature was increased from 20 to 25°C, with a survival rate of 80% at both temperatures. The thermal parameters varied according to the development stage of the mealybug and the base temperature was fixed at 8.0 °C for the nymphal stage of females, a thermal constant of 422.1 day degrees and number of generations increased with rising temperature. The optimal temperature for the insect development was 25°C.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The propagation of 'juçara' and 'açaí' is done by seeds, but there is a great desuniformity in the germination process. In this way, the objective of this study was to verify the effect of temperature, mechanical scarification and substrate on seed germination of both species. Two experiments were conducted in a completely randomized design, with four replications each consisting of 25 seeds. The first was conducted with 14 treatments in factorial scheme 7 x 2, seven temperatures (20, 25, 30, 35, 20-30 and 25-35 °C and natural condition), with and without mechanical scarification. The second was constituted of eight treatments in factorial scheme 4 x 2, four substrates (sand, vermiculite, coconut fiber and soil + manure), with and without mechanical scarification. Seeds of 'juçara' palm present the highest mean percentage and germination speed index in alternating temperatures of 20-30 and 25-35 °C and natural condition and in substrates sand, vermiculite and coconut fiber. Temperatures of 30, 35, 20-30 and 25-35 °C and natural condition in all substrates tested were the most favorable condition for 'açai' seeds. The scarification of the seeds was favorable to the germination process of 'juçara' whereas the seeds of açaí does not need to be scarified.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The weather and climate has a direct influence in agriculture, it affects all stages of farming, since soil preparation to harvest. Meteorological data derived from automatic or conventional weather stations are used to monitor these effects. These meteorological data has problems like difficulty of data access and low density of meteorological stations in Brazil. Meteorological data from atmospheric models, such as ECMWF (European Center for Medium-Range Weather Forecast) can be an alternative. Thus, the aim of this study was to compare 10-day period precipitation, maximum and minimum air temperature data from the ECMWF model with interpolated maps from 33 weather stations in Sao Paulo state between 2005 and 2010 and generate statistical maps pixel by pixel. Statistical index showed spatially satisfactory (most of the results with R 2 > 0.60, d > 0.7, RMSE < 5°C and < 50 mm; Es < 5°C and < 24 mm) in period and ECMWF model can be recommended for use in the Sao Paulo state.