Overlay removable partial dentures for a patient with ectodermal dysplasia: A clinical report

The orofacial characteristics of ectodermal dysplasia include anodontia or hypodontia, hypoplastic conical teeth, underdevelopment of the alveolar ridges, frontal bossing, a depressed nasal bridge, protuberant lips, and hypotrichosis. Patients with this disease often need complex prosthetic treatment. The options for a definitive treatment plan may include fixed, removable, or implant-supported prostheses, singly or in combination. However, financial constraints and other priorities can prevent patients from choosing the most desirable treatment. This clinical report describes the diagnosis and treatment of ectodermal dysplasia in an 18-year-old man. The treatment included interim removable partial dentures fabricated to establish an acceptable therapeutic occlusal vertical dimension, followed by definitive overlay removable partial dentures and composite restorations.

Oral paracoccidioidomycosis: a study of 36 South American patients

Paracoccidioidomycosis (South American blastomycosis) is an uncommon, progressive systemic mycosis, virtually only seen in persons who have visited Latin America. Reports of oral lesions are extremely rare in the English-language literature. Thirty-six adults with oral lesions as the first sign of paracoccidioidomycosis are described; this appears to be the largest series in the dental literature. All had chronic proliferative mulberry-like ulcerated oral lesions; the diagnosis was confirmed histologically. The gingiva or alveolar process was the typical site, but lesions were also seen particularly on the palate and lip. Most of the patients proved to have detectable pulmonary involvement. Patients with lesions in the oropharynx, tongue, or floor of mouth all had confirmed pulmonary lesions.

High-speed cavity preparation techniques with different water flows

Statement of problem. Cavity and tooth preparations generate heat because the use of rotary cutting instruments on dental tissues creates friction. Dental pulps cannot survive temperature increases greater than 5.5degreesC.Purpose. This study evaluated the efficiency of 3 different water flows for 2 different tooth preparation techniques to determine which are safe for use.Material and methods. Thermocouples were placed in the pulpal chambers of 30 bovine teeth, and 1 of 2 tooth preparation techniques was used: a low-load intermittent tooth preparation technique or a high-load tooth preparation technique without intervals. Water flows of 0, 30, and 45 mL/min were associated with each technique, for a total of 6 different groups. The results were analyzed with a 2-factor analysis of variance (P<.05).Results. Temperature increases with the high-load technique were 16.40&DEG;C without cooling (group 1), 11.68&DEG;C with 30 mL/min air-water spray cooling (group III), and 9.96&DEG;C with 45 mL/min cooling (group V). With the low-load tooth preparation technique, a 9.54&DEG;C increase resulted with no cooling (group II), a 1.56&DEG;C increase with 30 mL/min air-water spray cooling (group TV), and a 0.04&DEG;C decrease with 45 mL/min cooling (group VI). The low-load technique was associated with more ideal temperature changes.Conclusion. The results of this study confirm the necessity of using a low-load technique and water coolants during cavity and tooth preparation procedures.

Anatomy of the oral cavity of hylid larvae from the genera Aplastodiscus, Bokermannohyla, and Hypsiboas (Amphibia, anura): Description and systematic implications

Internal larval oral anatomy was used to explore morphological diversity and its contribution to the systematics of the genera Aplastodiscus, Bokerinannohyla, and Hypsiboas, belonging to the tribe Cophomantini. Internal oral morphology was examined for tadpoles of 12 species. All species have a large pair of infralabial papillae on the buccal floor and other papillae on the prelingual region. In Aplastodiscus and Bokerinannohyla, the large infralabial papillae have digitiform secondary projections. The number and arrangement of the buccal floor papillae varies among species, but they are more numerous in Aplastodiscus and Bokerinannohyla. The arrangement of the postnarial papillae is variable, but in Aplastodiscus and Bokerinannohyla, they show a definite, inverted V-shape pattern. The lateral ridge papillae are more complex in larvae of Bokertnannohyla with long digitiform secondary projections. Tadpoles of only Aplastodiscus albofrenatus, Aplastodiscus eugenioi, and Bokerinannohyla luctuosa have papillae on the buccal roof arena and larvae of all species have lateral roof papillae except Hypsiboas albomarginatus and Hypsiboas cinerascens. Larvae of Aplastodiscus, Bokermannohyla, and Hypsiboas presumably share the presence of vacuities anterior to the internal nares; although this character state is clearly synapomorphic within hylids, it is still uncertain whether it is exclusive of these three genera or whether it is present in the other genera of the tribe Cophomantini (Hyloscirtus and Myersiohyla). The inclusion of internal oral anatomy characters, such as the narial vacuities, in systematic studies is certainly valuable because it will provide additional information toward the understanding of phylogenetic relationships.

Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth

Statement of problem. Acrylic resin denture teeth soften upon immersion in water, and the heating generated during microwave sterilization may enhance this process.Purpose. Six brands of acrylic resin denture teeth were investigated with respect to the effect of microwave sterilization and water immersion on Vickers hardness (VHN).Material and Methods. The acrylic resin denture teeth (Dentron [D], Vipi Dent Plus [V], Postaris [P], Biolux [B], Trilux [T], and Artiplus [A]) were embedded in heat-polymerized acrylic resin within polyvinylchloride tubes. For each brand, the occlusal surfaces of 32 identical acrylic resin denture posterior teeth were ground flat with 1500-grit silicon carbide paper and polished on a wet polishing wheel with a slurry of tin oxide. Hardness tests were performed after polishing (control group, C) after polishing followed by 2 cycles of microwave sterilization at 650 W for 6 minutes (MwS group), after polishing followed by 90-day immersion in water (90-day Wim group), and after polishing followed by 90-day storage in water and 2 cycles of microwave sterilization (90-day Wim + MwS group). For each specimen, 8 hardness measurements were made and the mean was calculated. Data were analyzed with a 2-way analysis of variance followed by the Bonferroni procedure to determine any significance between pairs of mean values (alpha=.01).Results: Mircrowave sterilization of specimens significantly decreased (P <.001) the hardness of the acrylic resin denture tooth specimens P (17.8 to 16.6 VHN, V (18.3 to 15.8 VHN), T (17.4 to 15.3 VHN), B (16.8 to 15.7 VHN), and A (17.3 to 15.7 VHN). For all acrylic resin denture teeth, no significant differences in hardness were found between the groups Mws, 90-day Wim, and 90-day Wim + MwS, with the exception of the 90-day Wim + MwS tooth A specimens (14.4 VHN), which demonstrated significant lower mean values (P <.001) than the 90-day Wim (15.8 VHN) and MwS (15.7 VHN) specimens.Conclusions. For specimens immersed in water for 90 days, 2 cycles of microwave sterilization had no effect on the hardness of most of the acrylic resin denture teeth.

Composite occlusal surfaces for acrylic resin denture teeth

Acrylic resin denture teeth often exhibit rapid occlusal wear, which may lead to a loss of chewing efficiency and a loss of vertical dimension of occlusion. The use of metal occlusal surfaces on the acrylic resin denture teeth will minimize occlusal wear. Several articles have described methods to construct metal occlusal surfaces; however, these methods are time-consuming, costly, and sometimes considered to be unesthetic. These methods also require that the patient be without the prosthesis for the time necessary to perform the laboratory procedures. This article presents a quick, simple, and relatively inexpensive procedure for construction of composite occlusal surfaces on complete and partial dentures.

Morphometric and histochemical study of the human vocal muscle

The present study was conducted on vocal muscles removed at autopsy Rom adult individuals (10 men and 8 women, aes ranging from 48 to 78 years) with no laryngeal disease. Histologic analysis was performed with hematoxylin and eosin staining, and histochemical analysis was performed by nicotinamide-adenine-dinucleotide tetrazolium reductase, succinate dehydrogenase, and acid and alkaline myofibrillar adenosine triphosphatase reactions. The histochemical reactions showed that the muscle consists of slow-twitch oxidative (SO), fast-twitch glycolytic (FG), and fast-twitch glycolytic oxidative (FOG) fibers distributed in mosaic form. The frequencies of SO, FOG, and FG fibers were 40.50%, 54.75%, and 4.75%, respectively. The higher frequency of SO and FOG oxidative fibers characterizes the muscle as having aerobic metabolism, resistance to fatigue, and fast contraction. The mean minimum diameters were 31.37 mu m for SO fibers and 36.46 mu m for FOG and FG fibers.

A variation on split-cast mounting for complete denture construction

dThis article describes a variation of the split-cast mounting technique wherein the border of the definitive cast is wrapped with masking tape to form a container for the dental plaster normally used to affix the cast to the articulator. The entire inferior surface of the cast is coated with a thin film of petroleum jelly, and the cast is mounted in the articulator. After the dental plaster has set, the cast is retained by means of the masking tape. The cast is separated from the dental plaster simply by removing the masking tape.

MICROSATELLITE MARKERS DEVELOPED FOR UTRICULARIA RENIFORMIS (LENTIBULARIACEAE)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A New Species of Proceratophrys (Anura: Cycloramphidae) from Midwestern Brazil

We describe adult morphology, advertisement call, and natural history aspects of a new frog species from riparian habitats alongside intermittent headwater streams in southwestern Cerrado, the second largest biome in Brazil. Presently known from three localities in Mato Grosso State, the new species belongs to the Proceratophrys cristiceps group. It is characterized mainly by small size (adult snout vent length approximately 46 mm), snout rounded in dorsal view and obtuse in lateral view, absence of flared lips, dorsal skin granular, and absence of both postocular swellings and prominent palpebral appendages. The advertisement call of the new species consists of a single note with 19-25 pulses. Calls are repeated at mean intervals of 0.7 sec. Mean dominant frequency is 1,250.2 Hz, with ascendant modulation.

Natural History of the Lutz's Frog Cycloramphus lutzorum Heyer, 1983 (Anura: Cycloramphidae) in the Brazilian Atlantic Forest: Description of the Advertisement Call, Tadpole, and Karyotype

We describe the advertisement call, tadpole, karyotype, and additional information on the natural history of Cycloramphus lutzorum from southern Brazil. Sonograms were generated from digitally recorded calls. Tadpoles were collected in the field for description in the lab, and an adult was collected for karyotyping. Data on seasonal activity were gathered monthly from November 2005 to November 2007. All tadpoles (N = 21), juveniles (N = 18), and adults (N = 52) were found exclusively in streams. Reproduction, as identified by calling frogs, occurred from July through November. Frogs call all day long, but mostly at dusk, from rock crevices inside the stream edges near the splash zone. The call is short and loud, with 11 pulsed notes, of 491-641 ms, with a dominant frequency of 0.98-1.39 kHz. We describe the exotrophic and semiterrestrial tadpoles, always found in constantly humid vertical rock walls in the stream. Tadpoles of C. lutzorum are recognized by differences in labial tooth row formula, eye diameter, body shape, position of nares, and development of tail. Like congeneric species, the karyotype of C. lutzorum comprises 26 metacentric and submetacentric chromosomes. Cycloramphus lutzorum is restricted to and adapted for living in fast flowing streams, many of which are threatened by deforestation, pollution, and habitat loss. Therefore, we recommend the status of C. lutzorum be changed from its current "Data Deficient" to "Near Threatened (NT)" in the IUCN species red list.

DEVELOPMENT of MICROSATELLITE MARKERS FOR PIMENTA PSEUDOCARYOPHYLLUS (MYRTACEAE), A WILD SOUTH AMERICAN SPECIES

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)