The use of preserved equine renal capsule to repair lamellar corneal lesions in normal dogs

The purpose of this study was to evaluate the use of equine renal capsule preserved in 98% glycerine to repair lamellar corneal lesions in normal dogs. For this purpose, 12 dogs, divided into six groups (n = 2), were used to evaluate the 1st to 7th day, 15th day and 30th to 60th postoperative day. In order to perform the histologic study, the clinical procedures were analyzed, while the recipient's corneas were collected. The photophobia and blepharospasm also were more intense in the 1st to 7th postoperative day, and regressed in the 15th postoperative day. Therefore, the edema and the vascular events were both more frequent in the intermediary phases and regressed in the late periods. On the other hand, the morphological evaluation demonstrated an inflamatory exudate, also in the intermediary and late periods. These results suggested that the equine renal preserved capsule could be a useful alternative tissue to repair lamellar corneal lesions in dogs.

Bupivacaína, Ropivacaína e Levobupivacaína em Analgesia e Anestesia de Parto. Repercussões Materno-Fetais

Background and Objectives - Bupivacaine has been a very useful local anesthetic in Obstetrics in spite of its potential cardiotoxicity. In obstetric analgesia, ropivacaine is preferred to bupivacaine, and levobupivacaine is less cardiotoxic than the racemic mixture. The aim of this study was to compare the maternal-fetal effects of bupivacaine, ropivacaine and levobupivacaine in obstetric analgesia and anesthesia. Methods - Participated in this study 33 term pregnant women, physical status ASA I and II submitted to epidural anesthesia who received 18.75 mg (in 15 ml completed with 9% saline) of: GI - bupivacaine, GII - ropivacaine, and GIII - levobupivacaine. Pain intensity, sensory block level, onset time, quality of analgesia, motor block intensity, analgesia duration and time for labor resolution were evaluated. For vaginal delivery, 40 mg (in 8 ml of saline) of the same local anesthetic were used; for cesarean delivery, the dose has been mg in 20 ml solution. Newborns of these mothers were evaluated through the Apgar score in minutes 1, 5 and 10, and through the Amiel-Tison method (neurologic and adaptative capacity score - NACS) at 30 min, 2 h, and 24 h. Results - There were no significant statistical differences among groups as to sensory block level, onset time, quality of analgesia, labor analgesia duration, time for labor resolution, and Apgar scores at minute 1. Ast to motor block, GIII > GII and GI was intermediary. In relation to pain intensity, there was a trend for GI > GIII. For Apgar scores in minute 5, GII > (GI = GIII), and in minute 10 (GI = GII) < GIII. NACS at 2 h showed, GII > GI > GIII, and at 24 h, GII > GIII > GI. Conclusions - Ropivacaine has relieved maternal pain with less motor block. Newborns of GII mothers (ropivacaine) showed the best Apgar and NACS scores.

Use of one-bottle adhesive as an intermediate bonding layer to reduce sealant microleakage on saliva-contaminated enamel

Purpose: To evaluate the influence of three different adhesives, each used as an intermediary layer, on microleakage of sealants applied under condition of salivary contamination. Materials and Methods: Six different experimental conditions were compared, 3 with adhesives and 3 without. After prophylaxis and acid etching of enamel, salivary contamination was placed for 10 s. In Group SC the sealant was applied after saliva without bonding agent and then light-cured. In Group SCA, after saliva, the surface was air dried, and then the sealant was applied and cured. In Groups ScB, SB and PB, a bonding agent (Scotchbond Dual Cure/3M, Single Bond/3M and Prime & Bond 2.1/Dentsply, respectively) was applied after the saliva and prior to the sealant application and curing. After storage in distilled water at 37°C for 24 hrs, the teeth were submitted to 500 thermal cycles (5°C and 55°C), and silver nitrate was used as a leakage tracer. Leakage data were collected on cross sections as percentage of total enamel-sealant interface length. Representative samples were evaluated under SEM. Results: Sealants placed on contaminated enamel with no bonding agent showed extensive microleakage (94.27% in SC; 42.65% in SCA). The SEM revealed gaps as wide as 20 μm in areas where silver nitrate leakage could be visualized. In contrast, all bonding agent groups showed leakage less than 6.9%. Placement of sealant with a dentin-bonding agent on contaminated enamel significantly reduced microleakage (P< 0.0001). The use of a bonding agent as an intermediary layer between enamel and sealant significantly reduced saliva's effect on sealant microleakage.

Ultrastructure of Sorubim lima (Teleostei, Siluriformes, Pimelodidae) spermiogenesis

The spermiogenesis and the spermatozoon ultrastructure of Sorubim lima were studied. Our observations showed that early spermatids are round-shaped cells, have spherical nucleus with diffuse chromatin, small quantity of mitochondria and large amount of vesicles in the cytoplasm. During the differentiation process in the nucleus, chromatin compacts in a progressive and homogeneous way, and the flagellum is formed. In the cytoplasm the vesicles, that have double membranes, aggregate and fuse on the plasma membrane. The spermatozoa of 5. lima have no acrosome and show spherical nucleus with homogeneous and highly compacted chromatin, intermediary piece with mitochondria and double wall vesicles contiguous to the plasma membrane, as well as a flagellum formed by a basic axoneme (9 + 2).

A theoretical and experimental analysis of cold-formed steel shapes subjected to bending - Channel and simple lipped channel

Cold-formed steel shapes have been widely employed in steel construction, where they frequently offer a lower cost solution than do traditional laminated shapes. A classic application of cold-formed steel shapes is purlins in the roof panel of industrial buildings, connected to the roof panel by means of screws. The combined effect of these two elements has been the subject of investigations in some countries. Design criteria were included in the AISI Code in 1991 and 1996. This paper presents and discusses the results obtained from bending tests carried out on shapes commonly used in Brazil, i.e., the channel and the simple lipped channel, Tests were carried out on double shapes with 4.5 and 6.0 meter spans, which were subjected to concentrated loads and braced against each other on the supports and at intermediary points in three different load situations. The panel shape was also analyzed experimentally, simulating the action of wind by means of a vacuum box designed specifically for this purpose. The test results were then compared to those obtained through the theoretical analysis, enabling us to extract important information upon which to base proposed design criteria for the new Brazilian code.

Stochastic Stability for Markovian Jump Linear Systems Subject to a Crucial Failure Event

This paper is concerned with the stability of discrete-time linear systems subject to random jumps in the parameters, described by an underlying finite-state Markov chain. In the model studied, a stopping time τ Δ is associated with the occurrence of a crucial failure after which the system is brought to a halt for maintenance. The usual stochastic stability concepts and associated results are not indicated, since they are tailored to pure infinite horizon problems. Using the concept named stochastic τ-stability, equivalent conditions to ensure the stochastic stability of the system until the occurrence of τ Δ is obtained. In addition, an intermediary and mixed case for which τ represents the minimum between the occurrence of a fix number N of failures and the occurrence of a crucial failure τ Δ is also considered. Necessary and sufficient conditions to ensure the stochastic τ-stability are provided in this setting that are auxiliary to the main result.

The LQ control problem for Markovian jumps linear systems with horizon defined by stopping times

This paper deals with a stochastic optimal control problem involving discrete-time jump Markov linear systems. The jumps or changes between the system operation modes evolve according to an underlying Markov chain. In the model studied, the problem horizon is defined by a stopping time τ which represents either, the occurrence of a fix number N of failures or repairs (TN), or the occurrence of a crucial failure event (τΔ), after which the system is brought to a halt for maintenance. In addition, an intermediary mixed case for which T represents the minimum between TN and τΔ is also considered. These stopping times coincide with some of the jump times of the Markov state and the information available allows the reconfiguration of the control action at each jump time, in the form of a linear feedback gain. The solution for the linear quadratic problem with complete Markov state observation is presented. The solution is given in terms of recursions of a set of algebraic Riccati equations (ARE) or a coupled set of algebraic Riccati equation (CARE).

Análise da incerteza na representação de classes de cobertura do solo urbano resultantes da aplicação de uma rede neural artificial

The great diversity of materials that characterizes the urban environment determines a structure of mixed classes in a classification of multiespectral images. In that sense, it is important to define an appropriate classification system using a non parametric classifier, that allows incorporating non spectral (such as texture) data to the process. They also allow analyzing the uncertainty associated to each class from the output alues of the network calculated in relation to each class. Considering these properties, an experiment was carried out. This experiment consisted in the application of an Artificial Neural Network aiming at the classification of the urban land cover of Presidente Prudente and the analysis of the uncertainty in the representation of the mapped thematic classes. The results showed that it is possible to discriminate the variations in the urban land cover through the application of an Artificial Neural Network. It was also possible to visualize the spatial variation of the uncertainty in the attribution of classes of urban land cover from the generated representations. The class characterized by a defined pattern as intermediary related to the impermeability of the urban soil presented larger ambiguity degree and, therefore, larger mixture.

Influência da posição diametral das tábuas e da vaporização nos defeitos de secagem de Eucalyptus grandis

This study evaluated the Eucalyptus grandis drying defects acting on boards diametrical position and on log steaming. Half of the logs, with diameter from 20 to <25, 25 to <30 and 30 to <35cm, were steamed during 20 hours at 90°C of temperature. Subsequently, the logs (control and steamed) were sawn. The boards were dried in the dry-kiln pilot and the resulting defects from the drying process were measured. The results indicate that: (1) the boards coming from control logs presented different magnitude defects in function of the diametrical position. The split and spring to increase in direction to pith, the bow to increase in direction to bark and cupping were bigger in intermediary boards; (2) the boards coming from steamed logs presented a reduction from drying defects in function of logs diameter and its more homogeneous index in the pith-bark direction.

A HPF AC-AC converter for Permanent Magnet Generator applications

This paper describes the design and development of a high input power-factor (HPF) AC to AC converter for naval applications using Permanent Magnet Generator (PMG). The proposed converter comprises an isolated three-phase uncontrolled multipulse rectification stage directly connected to a single-phase inverter stage, without the use of DC to DC intermediary stage, resulting in more simplicity for the overall circuitry, assuring robustness, reliability and reduced costs. Furthermore, the multipulse rectifier stage is capable to provide high power factor and input currents with low total harmonic distortion (THD). The output voltage of the PMG varies from 260V rms (220 Hz) to 380V rms (360 Hz), depending on load conditions. The output single-phase inverter stage was designed to operate with wide range of DC bus voltage, maintaining 120V rms, 60 Hz output. Measured total harmonic distortion for the AC output voltage represents less than 2%, at 3.6kW nominal linear load. © 2010 IEEE.

Conversor CA-CA de elevado fator de potência para aplicações com geradores de Ímã permanente

This paper proposes and describes a high power factor AC-AC converter for naval applications using Permanent Magnet Generator (PMG). The three-phase output voltages of the PMG vary from 260 Vrms (220 Hz) to 380 Vrms (360 Hz), depending on load conditions. The proposed converter consists of a Y-/ΔY power transformer, which provides electrical isolation between the PMG and remaining stages, and a twelve-pulse uncontrolled rectifier stage directly connected to a single-phase inverter stage, without the use of an intermediary DC-DC topology. This proposal results in more simplicity for the overall circuitry, assuring robustness, reliability and reduced costs. Furthermore, the multipulse rectifier stage is capable to provide high power factor and low total harmonic distortion for the input currents of the converter. The single-phase inverter stage was designed to operate with wide range of DC bus voltage, maintaining 120 Vrms, 60 Hz output. The control philosophy, implemented in a digital signal processor (DSP) which also contains protection routines, alows series connections between two identical converters, achieving 240 Vrms, 60 Hz total output voltage. Measured total harmonic distortion for the AC output voltage is lower than 2% and the input power factor is 0.93 at 3.6kW nominal load. © 2010 IEEE.

Classificação citológica dos linfomas caninos

Lymphoma is among the most frequent canine neoplasia and share many similarities with human non-Hodgkin's lymphoma in respect of etiology, epidemiology, clinical, morphological and immunophenotipical aspects. Human classification schemes have been used in canine lymphoma. The aim of this work was apply Kiel, Working Formulation and Fournel-Fleury's et al. (1994) classification in Fine Needle Aspiration (FNA) cytology matherial. According to Kiel scheme 61.02% (36 cases) were high-grade lymphomas and 38.98% (23 cases) low grade. The Working Formulation, showed 11.86% (7 cases) of low grade, 61.02% (36 cases) intermediary grade and 27.12% (16 cases) high grade. In Fournel-Fleury's protocol revealed a predominance of high-grade lymphoma, with 61.02% (36 cases) over 38.98% (23 cases) of low grade. In conclusion, FNA can be used as a diagnostic method and in canine lymphoma cytological classification. Kiel's system showed the best results, once is based on cytologic basis.

Distribuição e abundância de larvas de Simulium spp.em córregos do estado de São Paulo nos diferentes níveis de qualidade da água

The aim of this work was to determine the distribution and abundance the species of Simulium: in 5 streams of the north coastal region of the state of São Paulo. Simulium larval and water samples were collected every 2 weeks in summer and winter, 2001. The larval were collected on artificial substrates (triplicate) preserved in alcohol (70%) and after analyzed quantitative and qualitative. From the streams the values of temperature, dissolved oxygen, conductivity, pH and stream discharge were measured. The contents of total nitrogen and dissolved nitrogen, ammoniacal nitrogen, nitrate, nitrite, orthophosphate, dissolved phosphorus and total phosphorus were determined in the laboratory. Water quality has great influence in the distribution and abundance of the species. S. pertinax was more abundant in streams without or with low levels of pollution, S. inaequale in streams more polluted and S. incrustatum in intermediary levels of pollution. S. pertinax was the species more abundant with 57.5% of presence in the samples, the second more abundant was S. inaequale with 42.1% of presence and S. incrustatum was rare with 0.4% of presence. The larval abundance was lower in the polluted environment. © 2012 by Unisinos.

Adhesion of real seal to human root dentin treated with different solutions

The aim of this study was to evaluate the effects of different irrigants on sealer-dentin bond strength when using Real Seal. Thirty single-rooted teeth were divided into 3 groups. In one group, the teeth were irrigated with 3 mL of 2.5% NaOCl after each file change, flushed with 17% EDTA for 3 min and finally rinsed with 3 mL of 2.5% NaOCl. In the other two groups, rinse with NaOCl was replaced with 2% chlorhexidine gluconate (CHX) and 0.9% saline, respectively. Each root was sectioned transversally into apical, middle and coronal thirds to obtain 2-mm-thick slices. Each slice was filled with Real Seal and Resilon. Push-out test was used to analyze bond strength and failure modes were classified as adhesive, cohesive or mixed, according to SEM observations. The push-out test did not reveal any statistically significant difference (p>0.05) between the irrigants. However, the groups exhibited significantly different (p<0.05) bond strengths in terms of the root canal third. Higher bond strength was observed at the apical third when compared with coronal third, while middle third presented intermediary values. Fifteen specimens were analyzed by SEM (5 per group). Eleven specimens exhibited adhesive failures (5 in saline, 4 in NaOCl and 2 in CHX group); 2 cohesive failures were observed in the CHX group, and 1 mixed failure each was observed in the CHX and NaOCl groups. The tested irrigants did not influence the bond strength of Resilon and Real Seal to dentin. The apical third exhibited higher mean bond strengths and adhesive failures were predominant.

Effects of treatment of the fat body trophocytes of Melipona quadrifasciata anthidioides nurse workers and virgin queens in culture by juvenile hormone III and ecdysterone (20-HE)

The fat body (FB) consists of two types of cells: throphocytes and oenocytes. Throphocytes are related to intermediary metabolism storing lipids, carbohydrates, and proteins while oenocytes play role in the lipids and lipoproteins production. The vitellogenin is the precursor of egg yolk (vitelline) and is synthesized on FB. The aim of this work was to analyze the effects of hormones acting in bee reproduction, as juvenile hormone (JH) and ecdisteroids (20 HE) on FB cells, where vitellogenin is synthesized. For the study were chose nurse workers that in Melipona quadrifasciata anthidioides present activated ovaries and produce eggs, and virgin queens whose ovaries are not yet activated, presenting only previtellogenic follicles. FB trophocytes from these classes of bees were cultivated in media containing different amounts of JH and 20-HE. The effects on trophocytes cytoplasm reserves of lipids, proteins, and activity of acid phosphatase were compared by observing preparations from cultured FB, treated and control, by transmission electron microscopy (TEM). The results showed that the hormones effects are related to the bee's caste and functional ovary stage. The role of acid phosphatase on mobilization of the trophocyte reserves was also determined. © 2012 Wiley Periodicals, Inc.