Genetic parameters for body weight in buffaloes (Bubalus bubalis) in Colombia using random regression models

The objective of this research was to estimate (co) variance functions and genetic parameters for body weight in Colombian buffalo populations using random regression models with Legendre polynomials. Data consisted of 34,738 weight records from birth to 900 days of age from 7815 buffaloes. Fixed effects in the model were contemporary group and parity order of the mother. Random effects were direct and maternal additive genetic, as well as animal and maternal permanent environmental effects. A cubic orthogonal Legendre polynomial was used to model the mean curve of the population. Eleven models with first to sixth order polynomials were used to describe additive genetic direct and maternal effects, and animal and maternal permanent environmental effects. The residual was modeled considering five variance classes. The best model included fourth and sixth order polynomials for direct additive genetic and animal permanent environmental effects, respectively, and third-order polynomials for maternal genetic and maternal permanent environmental effects. The direct heritability increased from birth until 120 days of age (0.32 +/- 0.05), decreasing thereafter until one year of age (0.18 +/- 0.04) and increased again, reaching 0.39 +/- 0.09, at the end of the evaluated period. The highest maternal heritability estimates (0.11 +/- 0.05), were obtained for weights around weaning age (weaning age range is between 8 and 9.5 months). Maternal genetic and maternal permanent environmental variances increased from birth until about one year of age, decreasing at later ages. Direct genetic correlations ranged from moderate (0.60 +/- 0.060) to high (0.99 +/- 0.001), maternal genetic correlations showed a similar range (0.41 +/- 0.401 and 0.99 +/- 0.003), and all of them decreased as time between weighings increased. Direct genetic correlations suggested that selecting buffalos for heavier weights at any age would increase weights from birth through 900 days of age. However, higher heritabilities for direct genetic weights effects after 600 days of age suggested that selection for these effects would be more effective if done during this age period. A greater response to selection for maternal ability would be expected if selection used maternal genetic predictions for weights near weaning. (C) 2013 Elsevier B.V. All rights reserved.

Mechanical and Thermal Properties of Thermoplastic Random Copolyesters Made from Lipid- Derived Medium and Long Chain Poly (x-hydroxyfatty acid) s

The physical properties of novel thermoplastic random copolyesters [-(CH2)(n)-COO-/-(CH2)(n)-COO-](x) made of long (n=12) and medium (n=8) chain length -hydroxyfatty esters [HO-(CH2)(n)-COOCH3] derived from bio-based vegetable oil feedstock are described. Poly(-hydroxy tridecanoate/-hydroxy nonanoate) P(-Me13-/-Me9-) random copolyesters (M-n=11,000-18,500 g/mol) with varying molar ratios were examined by TGA, DSC, DMA and tensile analysis, and WAXD. For the whole range of P(-Me13-/-Me9-) compositions, the WAXD data indicated an orthorhombic polyethylene-like crystal packing. Their melting characteristics, determined by DSC, varied with composition suggesting an isomorphic cocrystallization behavior. TGA of the P(-Me13-/-Me9-)s indicated improved thermal stability determined by their molar compositions. The glass transition temperature, investigated by DMA, was also found to vary with composition. The crystallinities of P(-Me13-/-Me9-)s however, were unaffected by the composition. The stiffness (Young's modulus) of these materials was found to be related to their degrees of crystallinity. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40492.

Assessing Paternity in Japanese Quails (Coturnix Japonica) Using Microsatellite Markers - Inferences for Its Mating System and Reproductive Success

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genetic parameters for production traits of dairy Gyr (Bos indicus) x Holstein cattle estimated with a random regression model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Random regression models to estimate genetic parameters for milk production of Guzerat cows using orthogonal Legendre polynomials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predicting breeding values for milk yield of Guzera (Bos indicus) cows using random regression models

Given the importance of Guzera breeding programs for milk production in the tropics, the objective of this study was to compare alternative random regression models for estimation of genetic parameters and prediction of breeding values. Test-day milk yields records (TDR) were collected monthly, in a maximum of 10 measurements. The database included 20,524 records of first lactation from 2816 Guzera cows. TDR data were analyzed by random regression models (RRM) considering additive genetic, permanent environmental and residual effects as random and the effects of contemporary group (CG), calving age as a covariate (linear and quadratic effects) and mean lactation curve as fixed. The genetic additive and permanent environmental effects were modeled by RRM using Wilmink, All and Schaeffer and cubic B-spline functions as well as Legendre polynomials. Residual variances were considered as heterogeneous classes, grouped differently according to the model used. Multi-trait analysis using finite-dimensional models (FDM) for testday milk records (TDR) and a single-trait model for 305-days milk yields (default) using the restricted maximum likelihood method were also carried out as further comparisons. Through the statistical criteria adopted, the best RRM was the one that used the cubic B-spline function with five random regression coefficients for the genetic additive and permanent environmental effects. However, the models using the Ali and Schaeffer function or Legendre polynomials with second and fifth order for, respectively, the additive genetic and permanent environmental effects can be adopted, as little variation was observed in the genetic parameter estimates compared to those estimated by models using the B-spline function. Therefore, due to the lower complexity in the (co)variance estimations, the model using Legendre polynomials represented the best option for the genetic evaluation of the Guzera lactation records. An increase of 3.6% in the accuracy of the estimated breeding values was verified when using RRM. The ranks of animals were very close whatever the RRM for the data set used to predict breeding values. Considering P305, results indicated only small to medium difference in the animals' ranking based on breeding values predicted by the conventional model or by RRM. Therefore, the sum of all the RRM-predicted breeding values along the lactation period (RRM305) can be used as a selection criterion for 305-day milk production. (c) 2014 Elsevier B.V. All rights reserved.

Inferences of body energy reserves on conception rate of suckled Zebu beef cows subjected to timed artificial insemination followed by natural mating

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Functional morphology of the reproductive system and sperm transfer in Stenopus hispidus (Crustacea: Decapoda: Stenopodidea), and their relation to the mating system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Random regression models using different functions to model milk flow in dairy cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Coherence characteristics of random lasing in a dye doped hybrid powder

The photon statistics of the random laser emission of a Rhodamine B doped di-ureasil hybrid powder is investigated to evaluate its degree of coherence above threshold. Although the random laser emission is a weighted average of spatially uncorrelated radiation emitted at different positions in the sample, a spatial coherence control was achieved due to an improved detection configuration based on spatial filtering. By using this experimental approach, which also allows for fine mode discrimination and timeresolved analysis of uncoupled modes from mode competition, an area not larger than the expected coherence size of the random laser is probed. Once the spectral and temporal behavior of nonoverlapping modes is characterized, an assessment of the photon-number probability distribution and the resulting second-order correlation coefficient as a function of time delay and wavelength was performed. The outcome of our single photon counting measurements revealed a high degree of temporal coherence at the time of maximum pump intensity and at wavelengths around the Rhodamine B gain maximum.

Avaliação da autozigosidade em vacas Nelore (Bos indicus) através de genótipos SNP de alta densidade

Pós-graduação em Medicina Veterinária - FCAV

Mating system variation and assortative mating of sympatric bromeliads (Pitcairnia spp.) endemic to neotropical inselbergs

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of random/aligned nylon-6/MWCNT fibers on dental resin composite reinforcement

The aims of this study were (1) to synthesize and characterize random and aligned nanocomposite fibers of multi-walled carbon nanotubes (MWCNT)/nylon-6 and (2) to determine their reinforcing effects on the flexural strength of a dental resin composite.Nylon-6 was dissolved in hexafluoropropanol (10 wt%), followed by the addition of MWCNT (hereafter referred to as nanotubes) at two distinct concentrations (i.e., 0.5 or 1.5 wt%). Neat nylon-6 fibers (without nanotubes) were also prepared. The solutions were electrospun using parameters under low- (120 rpm) or high-speed (6000 rpm) mandrel rotation to collect random and aligned fibers, respectively. The processed fiber mats were characterized by scanning (SEM) and transmission (TEM) electron microscopies, as well as by uni-axial tensile testing. To determine the reinforcing effects on the flexural strength of a dental resin composite, bar-shaped (20 x 2 x 2 mm(3)) resin composite specimens were prepared by first placing one increment of the composite, followed by one strip of the mat, and one last increment of composite. Non-reinforced composite specimens were used as the control. The specimens were then evaluated using flexural strength testing. SEM was done on the fractured surfaces. The data were analyzed using ANOVA and the Tukey's test (alpha=5%).Nanotubes were successfully incorporated into the nylon-6 fibers. Aligned and random fibers were obtained using high- and low-speed electrospinning, respectively, where the former were significantly (p<0.001) stronger than the latter, regardless of the nanotubes'presence. Indeed, the dental resin composite tested was significantly reinforced when combined with nylon-6 fibrous mats composed of aligned fibers (with or without nanotubes) or random fibers incorporated with nanotubes at 0.5 wt%. (C) 2015 Elsevier Ltd. All rights reserved.

Random regression models for milk, fat and protein in Colombian Buffaloes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)